1993 Jaguar XJS Restoration Work
December 10, 2024
Today, Pete has fitted the DAB antenna, hands free microphone and made adaptions to the way the stereo cage fits in the dash using some
December 10, 2024
1987 Mereces 500SL rebuild continues
December 10, 2024
John and Jon have been at it again. They have successfully built up and fitted the new rear vents. They have also managed to fit
Wherever you look, it’s competition cars!
December 10, 2024
We have so much going on at Bridge Classic Cars Competitions right now; cars coming in, cars going out, cars finding new homes, cash alternatives
Advent Calendar Day 10 – A Bottle Of Wine
December 10, 2024
We have a great range of alcoholic and non-alcoholic drinks in The Classic Lounge at Bridge Classic Cars. Today’s winner will be the lucky recipient
1993 Jaguar XJS Restoration Work
December 10, 2024
Today, Pete has fitted the DAB antenna, hands free microphone and made adaptions to the way the stereo cage fits in the dash using some hand made rubber spacers. He has made a minor repair and location change to the sun visor clamp as this was sitting wonky and looks to have done so from factory.
We are awaiting an adapter for the DAB antenna connector to the back of the head unit and then this can be fitted in place for the final time. The Bluetooth, remote, and hands free functions are working as they should be. We are also chasing some interior parts for around the window switches and for the interior lights. Once these items have arrived that will conclude interior work on this big cat.
Amongst other things, the rear trailing arms have the new bushes fitted, have had a light shotblast, a fresh coat of paint and all now reassembled into the car. Pete had to fabricate new locking bolts to replace the worn ones and found a broken grease nipple so that was removed and replaced. The AC fan has finally come free of the old motor by drilling the shaft out and using a big hammer! It’s now mounted into the frame with it’s new motor and new fittings ready to go back in after we replace the condenser unit.
As Pete told us, a picture says a thousand words in this next section. Over the last couple of days he has been working on more rust repairs. The car has has had some extensive cosmetic and structural surgery. Removed a previous repair to the front of the nearside sill that was well below our standards and it highlighted just how poor this was done previously. We have found further rust holes behind it, this has now been cut out and new steel parts hand made to suit the shape of the car. Welded, dressed and primed. There has also been a lot of work replacing the lower rear quarter the same side. More rot was found on the inner panel, this has all been replaced and the new rear quarter welded into the car and trimmed/dressed to fit perfectly. He has even maintained the position of the original spot welds keeping this spots. Next we will be on the drivers side for similar repairs.
Much the same as the passenger side in fabrication needed, inner had slightly more rot than the passenger side but Pete has made replacement steel sections for this, all that remains is a final weld dress and then it onto the lower sill and jacking point repairs. Starting to be a very solid car now.
1987 Mereces 500SL rebuild continues
December 10, 2024
John and Jon have been at it again. They have successfully built up and fitted the new rear vents. They have also managed to fit and align the door mouldings.
John has then got to work on rebuilding the front head lights and stripping down the front bumper. The headlight wiper motor linkage was seized so we have stripped down motor to check the operation, which was okay. Then we proceeded to dismantle the linkage and free off the corroded/seized parts of the linkage. It was then greased and rebuilt and the operation checked. When satisfied it was then fitted to the vehicle.
As for the bumpers, they are not in the best state at the rear so we need to weigh up whether it is more costs effective to repair or replace with new.
Wherever you look, it’s competition cars!
December 10, 2024
We have so much going on at Bridge Classic Cars Competitions right now; cars coming in, cars going out, cars finding new homes, cash alternatives flying about all over the placed. It’s difficult to keep up!
So I thought I’d do a weekly round up of all competition car updates for you. I’m really sorry if you come on to read about one specific car (which I know a lot of you do) but I just thought I’d be a bit different today. Normal updates will follow…
2024 MG Cyberster
Our 2024 MG Cyberster, one of the very first models to arrive in the UK was won last week by Paul Butcher. Paul opted for the cash alternative of £45,000 which is an incredible sum of money just before Christmas. Being one of the first MG Cybersters to arrive on UK soil and being one of the most important EV’s to be released, this car is certainly set to be one for the future. A very special car indeed and now in the hands of EMG MG to sit as pride of place in their Ipswich showroom.
Available now if you want to get the keys to your own Cyberster in time for Christmas! Contact EMG MG for more information.
1987 Maserati BiTurbo
We can not wait for this car to be ready. The Maserati has been in our possession for many many years and is a genuine 11,000 mile car. Since taking ownership of this incredible car the values have soared, especially in the hard top models.
We are currently recommissioning the car and as it has been standing for some time this is not a 5 minute job, but will be well worth it when it’s complete.
We have stripped and cleaned the plenum chamber, inlet manifold and rocker covers ready for painting.
The carburettor has been removed from the inlet, we’ve cleaned out the float chamber and freed off the needle valve. Blow out jets and reassemble.
The rest of the parts have been removed from the manifold. to be degreased.
Make new seal with O-ring kit and refitted the manifold bottom water chamber.
We have flattened and polished the car.
The badge and lettering is now back on the car as well as the rear light and number plate.
Jon has finish preparing the parts for painting. He has cleaned the throttle and choke spindles.
The manifold has been masked up before being given to the body shop.
1968 Ford Lotus Cortina
Next up, our 1968 Ford Lotus Cortina in for a full appraisal on the workshop floor.
Swap wires from coil and ballast. Electronic ignition fitted and wired to coil 12v. Coil wired through ballast at 6v. We’ve swapped the wires from ballast to coil to 12v feed. Tighten steering idler bolts.
Next up, we’ve put the car up on the ramp to continue with our assessment.
The rear rear wheels have been removed to check the brakes. Nearside rear wheel bolts loose and wheel holes now elongated and won’t tighten so requires a new wheel.
We’ve fitted smaller nyloc nut to nearside trailing arm so bolt actually goes into nyloc.
There is a fuel leak from fuel tank sender area so we have drain the fuel. We’ve used the fuel pumps on the car to empty the tank. Next up, we’ve remove the sender, cleaned and tested. Removed the spark plugs and cleaned out holes. Cleaned and regapped before refitting the plugs.
Remove battery from boot and start to re-route the fuel pipes to pumps.
Continue re-routing the fuel pipes to pumps in the boot area. Drill and fit p-clips to floor, to hold pipe in place.
Refit battery and secure. We have slackened the alternator belt and checked waterpump and all is ok. Unbolt pulley and refit fan blades. Refit alternator belt and adjust. Remove driver’s seat and carpets. Fit fibre washer to ignition barrel and secure. Strip and fit new rear shoes but clip missing from offside so unable to finish.
Next, we have tested the repaired fuel sender and all seems to be ok.
Remove passengers seat and carpet. Start stripping to remove heater box.
Still more to do on our Cortina in preparation for filming. We have drain the coolant, remove some extra items attached to dash so we can finish removing the heater box.
Once removed, we have strip the heater box and removed the heater radiator.
Tested the radiator and found a split in the seam causing it to leak. With it removed, we are now able to tidy up the area.
And for now, we are up to date on competition cars!
Advent Calendar Day 10 – A Bottle Of Wine
December 10, 2024
We have a great range of alcoholic and non-alcoholic drinks in The Classic Lounge at Bridge Classic Cars. Today’s winner will be the lucky recipient of one of our bottles of wine.
The bottle will be personally selected by Craig, Managing Director, and will be with the winner in time to enjoy a glass or two over Christmas.
Leave a Reply