Peony Red Jensen Painted And Ready
We’re delighted to announce that after being smoothed and polished, our beautiful Peony Red Jensen has entered the trim shop. Chris spent yesterday smoothing and
We’re delighted to announce that after being smoothed and polished, our beautiful Peony Red Jensen has entered the trim shop. Chris spent yesterday smoothing and
Chris has been working on some of the exterior panels for our Peony Red Jensen. Although the body can be painted in one go, the
Yesterday afternoon was the moment we’ve all be waiting for. The first drop of Peony Red paint has been applied to our 1960 541S Jensen.
Step by step, our Peony red 1960 541S Jensen gets closer to actually being Peony Red. We’ve been referring to it with its colour but
Our Peony Red Jensen is getting closer to actually be Peony Red. This classic Jensen has been sat in parts for a while as we
Parts of our 1960 541S Jensen are sat in our paint bay whilst Chris works on them. The door hinges have been sandblasted, the door
The restoration to the Peony Red Jensen’s doors continues. James is working on correcting the corrosion damage by welding and fabricating new parts to replace
Our Peony Red Jensen has been masked and primed and is now ready for paint.
Brian from our trim shop has been working on creating more interior fittings for our 1960 Peony Red Jensen 541S. The first steps in creating
Our 1960 Peony red Jensen 541S is making good progress in the workshop. Here are the latest developments. Fabrication Bay Our technician Chris has been
We’ve sent off a collection of our dials back to Speedograph to refurbish them. These all belong to our Lilac Jensen 541R, the Amphicar, the
It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more
We’ve taken apart the old rear quarter panels on our 1960 Peony Red Jensen 541s, ready to make new ones. This is done by cutting
Our Peony Red 1960 Jensen 541S is getting closer and closer to evolving into a beautiful Peony Red classic. Before it can be painted, our
We are currently on the look out for new door closures for our Jensen 541S. Unable to source them from our comprehensive book of suppliers,
Our week has been very busy with two photoshoots at the start of the week and new projects arriving in the workshop. Tr6’s new hood
There’s been a lot going with week already and its only Wednesday! Take a look at what’s been going on s far. Range Rover Sport
As we progress to the final stages of our 1960 Jensen 541S body preparation the next major step is to fully assess our fibreglass work,
Some drama in the engine workshop! All was seemingly well with the engine re-build however, unbeknown to us, the dipstick tube had previously broken off
More work has been done on our 1960 Peony red Jensen 541S. The latest instalments are the seat covers and pockets that have been made
The Peony Red Jensen 541S has had its engine rebuilt. Our engine specialist has been working to refurbish and rebuild the old engine. No one
Our specialist technicians have been working hard on the 1960 Jensen 541S restoration. The latest refurbishments include smoothing and correcting the doors by filling any
Its been a busy week, with once again, many cars leaving, lots making big milestones and photoshoots! Behind the scenes on the Rolls Royce shoot
You’d be right in saying that this isn’t a red 1960 Jensen 541S. But with a bit of imagination and a lot of hard work
We popped into our in-house paint and trim shops this afternoon to check out what our classic car technicians are working on today. Darren, one
These car parts have all undergone a special cleaning treatment of vapour blasting here at our Pettistree workshop. The inlet manifold, cam cover, sump and
Derek, the proud owner of the 1961 Jensen 541S came along to our workshop this week to choose the colour scheme for the restoration. After
We will soon be ready to start the restoration of our 1961 Jensen 541S. Another very exciting Jensen project as we get to work restoring
Our recently purchased Jensen 541S has arrived at the showroom. An almost completed restoration, this vehicle will be available for sale soon with the option
We’ve just collected our latest showroom addition, this stunning Jensen 541S. The third ever 541 S to roll of the production line, this example is
We’re delighted to announce that after being smoothed and polished, our beautiful Peony Red Jensen has entered the trim shop.
Chris spent yesterday smoothing and polishing the body so that the paint looks smooth and perfect. We’re loving the richness of the red contrasting with the soft grey roof.
This 1960 541S Jensen is now sat in our trim shop ready to start its interior restoration journey.
Chris has been working on some of the exterior panels for our Peony Red Jensen. Although the body can be painted in one go, the exterior panels and doors need to be done separately to ensure the paint can get into all the details.
Here Chris is painting the wings with the Peony Red and a clear coat. The wheels have also been primed and painted.
Yesterday afternoon was the moment we’ve all be waiting for. The first drop of Peony Red paint has been applied to our 1960 541S Jensen. For months we’ve been watching our skilled technicians work on rebuilding and reworking the body of this Jensen and finally its entered the paint shop.
This is a very exciting development in this restoration project as it’s now starting to resemble a classic car! With this fresh layer of paint on, our beautiful Peony Red Jensen is blossoming into the iconic classic it should be.
Chris has been focusing on preparing other exterior elements for paint. Here Chris is working on a front bumper shield.
Our specialist paint technician, Chris, has been dedicated to preparing, masking and painting our beloved Peony Red Jensen. He began by applying primer and guide coat to the bonnet, panels and body. He then rubbed the car down with 320 and 500 sandpaper grit ready for paint. Once the car was masked up, it was ready for paint. Car masked up for a ‘Verkehrsgrau’ grey roof and red bottom. Once the two tones had been applied, Chris could paint on the clear preservative coat.
Step by step, our Peony red 1960 541S Jensen gets closer to actually being Peony Red. We’ve been referring to it with its colour but its been nothing more than various shades of white or metal for quite a while. Soon, we’ll be able to honestly call it Peony Red.
Chris has been applying the guide coat onto the body and smoothing down all the surfaces, ready for it to be masked and painted.
The Jensen is now sat in primer and once dried, will be painted the infamous Peony Red.
Our Peony Red Jensen is getting closer to actually be Peony Red. This classic Jensen has been sat in parts for a while as we work through the rust but is now on the final steps before it can be painted.
James has been working on creating a door spring mechanism that allows the window glass to sit safely inside the panel.
Below are some process photos of James preparing the door and fitting the elements. He’s been working on the left-hand door to remove old rust metal and tidy up repairs as well as fabricate new sections to weld in place.
Chris, our painter, has been preparing some of the individual elements for paint as the door wing and sill is now ready for primer. Several parts have been primed in a guide coat well as the wheels having been rubbed down ready for paint
Parts of our 1960 541S Jensen are sat in our paint bay whilst Chris works on them. The door hinges have been sandblasted, the door frames and door skins have been painted, and the boot, front bumper part and wheels are ready for primer. The black part for the boot rubber has also been painted.
The restoration to the Peony Red Jensen’s doors continues. James is working on correcting the corrosion damage by welding and fabricating new parts to replace the corroded elements. Both doors are bespoke and custom to the car, so James, one of our classic car specialists, is having to make all his adjustments bespoke and unique to the car.
You can see the process here:
Our Peony Red Jensen has been masked and primed and is now ready for paint.
Brian from our trim shop has been working on creating more interior fittings for our 1960 Peony Red Jensen 541S. The first steps in creating new door panels were to remove the old metal from the door panel board and make new panels from hardboard. The metal has been cut out and riveted, ready to be put in place. Brian then glued some foam to the door panel, cut out new leather and glued the sewn door panel to the leather panel. Once the parts were fixed together, Brian then turned the edges over. The next step was to then cut out the leather for the infill panel and glue that to the door panel.
A new armrest has also been fitted to the door panel. Brian removed the old cover from the armrest and made a new one, including new foam and a new pocket. Fresh piping has been fitted to the top edge of the pocket and foam support added. Chrome has then been added to the armrest trim.
Chris has removed the door skins from the door frames ready to have the paint taken off sandblasted. This is to combat the corrosion found inside the doors. Once this is completed, epoxy primer is applied inside and out. The bonnet and boot have been lined up and rubbed down as well. Holes have been marked out on the boot and are ready to re-drill.
James has removed both Aluminium door skins from the steel frames to work on the corrosion too. We will be using modern materials to avoid corrision occurring in the future rather than the original strips of canvas fabric to act as a barrier.
Here you can see the conditions of the door panels which are showing serious signs of corrosion and rust damage, including a series of holes appearing along the edge.
Our 1960 Peony red Jensen 541S is making good progress in the workshop. Here are the latest developments.
Our technician Chris has been working on the Jensen body in the fabrication bay. He’s been ‘gapping’ the doors so they look and fit the same around the sides. He’s also cut and ground both sides, added fibreglass to the bonnet to close the gap up and made a boot catch plate. Finally, Chris has marked the holes and tapping them up to make sure all the bolts fitted.
Brian has been making a new door panel board from hardboard in the trim shop. This has been done by removing the armrest from the pocket section, removing the metal trim and old cover from the armrest and then making a new pattern for the cover.
Once a pattern has been made, Brian can cut it out from leather, sew on the new cover and fit it to the armrest by glueing and stapling it in place. Brian has also added metal trim to the armrest and cut leather out to make a pocket section. This was then glued in place.
The edges have been turned around to neaten the cover and new piping has been sewn in. Brian then needed to glue the inner metal to the foam, and fit the metal in place. The next step was to then glue the rest of the foam to the inner side of the pocket and fit the armrest to the pocket section. Once fitted, the armrest has been secured with screws and riveting support bar to the back.
Kath has also been working on the Jensen. She’s taken off the old cover from the dashboard and removed the old glue as well, ready to the rub down the front and back in preparation for new material.
Once cleaned down, Kath can mark out the new material and glue both surfaces to stick the material in place. To neaten it up, the material is turned over the edges and the dash holes are trimmed around so that the new cover sits comfortably. Once both sides were done and had followed the same process, Kath then glued along where the two pieces of material meet.
The dash top also needed to be refurbished. For this, Kath removed the two old covers and cut out new material ready to cover the dash top element. Once the material had been marked around the top, it could then be glued along one edge, the material turned over and the corners neatened up.
Lydia has also been working on the Peony Red Jensen interior. She’s been focusing on rear squab by measuring out all the leather, assembling the pieces together and sewing it all up. Lydia then prepared for the fitting of the cover on to the foam and board. She marked out new plywood to replace old worn out original. The next step was to then add wadding to the original foam so it maintains a nice shape. After all this was done, it was time to fit the cover over the squab.
We’ve sent off a collection of our dials back to Speedograph to refurbish them. These all belong to our Lilac Jensen 541R, the Amphicar, the Peony Red Jensen and a Mercedes.
It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more unique and interesting cars, expanded the team and took new ventures.
This year we introduced our competitions back in May. With an uncertain year ahead of us, we wanted to provide some excitement to our followers, and what better way than to offer the chance of winning a car for less than ยฃ20! It wasn’t easy at first, but now with over 21 winners and up to 4 competition cars running at the same time, we’re doing better than ever. So far we’ve given away ยฃ561,197.00 worth of classic cars!
This week we’re delivering our latest winning cars, our 1974 VW Beetle that was won by Colin Knight and our 1995 Jaguar XJ6 who was won by Nick Nicola just before Christmas! We’re being careful to make the delivery as safe as possible, complying with tier 4 guidelines but we can’t wait to see Colin and Nick’s reactions!
Its been a long restoration, but we were delighted to announce the completion of our very own project, our 1967 Jaguar E-Type Series 1 Race Car Replica. Its come a long way from the decrepit shell we started with in 2017. Every detail, right down to the colour has been custom made and designed. This truly is a Bridge Classic Car. You can see it’s story here.
We love every and any classic car and are in turn, we’re equipped to fix and restore any classic too, but 2020 for us was the year of the Jensen. We’ve had eight 541R/541S’s in this year, some of which are still with us being completed. With only 193 Jensen 541R’s and 127 541S’s ever made worldwide, to have so many in at all really is outstanding, let alone all at the same time.
The 541R models were manufactured between 1957 and 1960 when they were later replaced by the 541S that ran from 1960 to 1962. Whilst each car is incredibly unique with its story and bespoke restoration, they are also very similar, and as you can imagine, with 8 very similar cars in at the same time, it took a while to get our heads around which was which when referring to them.
2020 saw the birth of the Trim Shop. Whilst we’d had individual trim specialists working with us before, we were yet to dedicate a department to it! Last year saw the creation of the Trim Shop, giving the speciality its own workshop and team which continued to grow throughout the year. Originally just Kath and Brian, we have welcomed a new face to the team recently. Lydia has now joined us and is another much-valued member of the trim shop. Having our own trim department allows us to continue keeping all our restorations under one roof, limiting the outsourcing as much as we can.
We’ve also had Ellie join this year, adding to the marketing department. Previously we had just Freddie, and briefly Charlotte doing our marketing, but as the company started to grow, we found the need to take on another set of hands for our marketing and visuals.
We’ve had some very unique cars in this year, including this original 1972 Chevron B20. Its seen top racing drivers, international races and a big crash in its lifetime and nowWe’re selling this on behalf of the owner but in the meantime, we’re enjoying housing this incredible special car. You can find out more about its history on our blogs.
The latter part of this year saw us start shooting some of our cars in a more editorial and creative style. Whilst we’ve always organised high-quality shoots of all our competition and for sale cars, we decided to add models to some of the shoots to make them a bit different.
Now we have both Freddie and Ellie on shoots, it means we can also get behind the scene insights into our shoots.
Another interesting and heartfelt restoration this year was our 1972 Jaguar E-Type Series 3 that we restored. In memory of their late uncle, the owner paid to have a commemorative plaque fitted by the handbrake. We also embedded one of their Uncle’s favourite cufflinks above it as well. As we always say, each restoration is special and every car carries its own stories, but this one was particularly special.
Last January, we had our open morning car show that proved to be incredibly popular. After having to cancel our 2021 January open morning show, we hope to organise one for later this year.
We’ve taken apart the old rear quarter panels on our 1960 Peony Red Jensen 541s, ready to make new ones. This is done by cutting out new mill board panels, cutting out new plywood panels, fitting new plywood panel to original top wood, glueing & stapling mill board panel to plywood panel, riveting brackets to edge of the panel, adding foam padding to cover panel and then glueing & stapling the leather cover to the panel.
A newly fabricated bonnet has been fitted too.
Jensen glove box door in mushroom interior has been made by Brian in the trim shop. This involved removing old vinyl, cutting new vinyl, sticking it onto the door, trimming around the edge.
The dash has also been renovated. Brian has removed the old cover, sanded it down to remove the old glue and leather, mark out the new material, and glue up the parts. Once the glue had dried it was stretched and the ends trimmed.
Our Peony Red 1960 Jensen 541S is getting closer and closer to evolving into a beautiful Peony Red classic. Before it can be painted, our workshop technicians Paul and Scott are assembling and fitting the parts before its sent back to the Fabrication bay for it to be properly fitted.
Once the fabrication bay has finished with the body work, it’ll be placed in the capable hands of our paint shop pro, Darren, who will begin the paint and prep process.
Here’s a reminder of the colours we’ve chosen for our Peony Red Jensen. It’s going to be dual-toned, with a grey roof and peony red body. These are the colours requested by the client.
We are currently on the look out for new door closures for our Jensen 541S. Unable to source them from our comprehensive book of suppliers, we will look to manufacture them new.
Our week has been very busy with two photoshoots at the start of the week and new projects arriving in the workshop.
Our trim shop has been fitting the frame to the TR6. This includes riveting straps to the frame bars, marking positions for fasteners around the rear of the hood and fitting those fasteners in position. The next step is to clip the front edge of the cover in place while the fasteners are riveted to the metal bar inside the hood.
Brian, one of our trim shop specialists the glued velcro to the sidebars and screwed in metal channels for the side rubbers. Once all the fasteners have been fitted, Brian could then fit the cover to the car.
Our Lotus Esprit has had a new water pipe fabricated from stainless steel to replace the old aluminium one that had rusted. This was made by hand in our workshop.
Although finish, the 1967 Jaguar E-type series 1 race car is always an ongoing project with new alterations being done frequently. This week a new door latch and release cable was fitted.
Our 1965 Triumph TR5 has had its split dashboard repaired. Refurbished by hand in our workshop, its now ready to be re-installed.
The trim shop has added wadding to the rear-seat centre section, glued the cover at front & back down and turned the fabric around the hinge at the back. The seats have also had the sides glued and pulled tight. Wadding has been added as well as extra foam to the side section of the rear seat base.
Primer has been done and its now ready for the fiberglass to be smoothed and corrected and the colour to be applied.
The Gold and Burgundy Jensen 541S had an issue with its engine which Ady, our engine specialist soon diagnosed as a cracked oil way. Oil was leaking into the water pipe. To discover the issue, Ady had to fill the oil way with water and push air through the pipe to identify the issue.
Both Monday and Tuesday were jam-packed for our marketing team with two photoshoots for our race cars, the Jaguar E-Type and the Chevron B20. We’re excited to share the results of these shoots. A big thank you to Ellough Park in Beccles for allowing us to shoot on their track and to Mark O’Connor who featured in the Jaguar E-Type photos. As an F1 test driver and stunt driver, he was the perfect person to get behind the wheel and model for the shoot!
There’s been a lot going with week already and its only Wednesday! Take a look at what’s been going on s far.
One of our directors, Gordon, had his Range Rover Sport’s tyres refurbished, ready for the cold winter months ahead. Now fully refurbished, Gordon’s Range Rover is ready to take on the elements.
As seen in our blog yesterday, the 1967 Jaguar E-Type Race Car has now been finished! This has been an incredibly exciting project that has been in progress since 2016. Over the last few days, the finishing touches have been added such as the pinstripes on the bonnet and fine-tuning the engine. The bonnet itself has also be re-installed to make sure it fits after the recent engine works.
Our other director, Craig, is in the process of choosing the leather for the interior and the spray finish for the fuel tank. It’s deciding details like this that make classic cars so personal to their owners.
One of the more notable updates on the Morris Minor 1000 is the new hood. The trim shop has done a fantastic job yet again to make the perfect custom hood, allowing this Morris Minor to be more usable throughout the changing seasons. Our technician Scott has also been trying to figure out the reason for the play in its front wheels. The mystery is yet to be solved…
The front suspension has also been tightened, the curtesy light wiring is being installed and Adam is troubleshooting the electrics.
Lots of little updates for the Grey Jensen 541R such as preparing the door rim before it goes to the trim shop, stripping the bonnet ready for paint, made the curtesy light switch by hand, installed the hand brake cables and panhard rod as well as the speedo drive.
Our 1968 Triumph TR5 is awaiting its interior but it has had its heater installed!
Our blue 1973 Jaguar E-Type Series 3 is awaiting on a new steering rack, clutch slave cylinder and bumper to be fitted. The parts have been ordered so the E-Type should be looking good as new in no time!
This lovely 1953 Ford Transit is almost ready to leave us now. We’re just waiting on some new 6 volt bulbs for the headlights and then it’ll be ready to go!
We’re giving the blue Jensen a general nut and bolt service. It came in to have its clutch, exhaust and breaks replaced which have been or are in the process of being fixed.
The Peony Red Jensen 542S has had its seats made up. The next step is to complete the set and install them. Our trim shop never fails to impress us with their stunning interior projects.
The Peugeot 504 has now had all its interior trim completed. The last few pieces include making and fitting the hood which had to have the leather glued to the frame once made up.
The black Jensen is visiting our paint shop for some touch-ups and corrections in the paintwork.
Ady our engine specialist has taken apart both exhaust manifolds on the Nissan 300ZX.
The fuel pump has been rewired, two bilge pumps are set to be added, the brakes have been bled, the grease nipples re-greased and the heater has been ordered.
A new gear stick gaiter has been made and fitted by the trim shop. Our range rover is making steady progress to be completed soon.
Although we don’t have the Black Spitfire back with us, we do have the task of replacing the half shafts. We’re hoping we can order in new pieces however we may need to take these apart instead and refurbish them ourselves.
As we progress to the final stages of our 1960 Jensen 541S body preparation the next major step is to fully assess our fibreglass work, to ensure we have covered all grounds before coating the full body shell in a primer ready for paint.
Some drama in the engine workshop! All was seemingly well with the engine re-build however, unbeknown to us, the dipstick tube had previously broken off inside the cylinder block. If Ady’s keen eyes hadn’t noticed, this would have led to a total engine strip and rebuild in the workshop later down the line!
Luckily he noticed and managed to remove it before it did too much damage. A new one has now been fitted.
The Peony Red Jensen 541S has had its engine refurbished by our engine specialist. A new steel tube has been installed as well as a distributor, water pump and oil filter housing.
More work has been done on our 1960 Peony red Jensen 541S. The latest instalments are the seat covers and pockets that have been made by our trim shop. This involved marking out the leather for the seats, sewing the piping and side bands on, making and sewing on the skirt, and then creating the pockets. Once all these elements have been carefully created, that can be put together.
Our engine specialist, Ady is in the process of rebuilding the engine. So far the bottom end is done and its awaiting the cylinder heads to be attached.
The Peony Red Jensen 541S has had its engine rebuilt. Our engine specialist has been working to refurbish and rebuild the old engine.
No one ever claimed that rebuilding engines were easier, nor pretty… Ady cleared out this huge sludge ball from the Peony Red’s engine. This rather dubious-looking ball of sludge is made from hard water and dirt caught up in the engine. Its all part of the job…
Our specialist technicians have been working hard on the 1960 Jensen 541S restoration. The latest refurbishments include smoothing and correcting the doors by filling any holes, taking out rust and installing custom made metal pieces.
Our engine specialist Ady carried out a full engine rebuild and has modified the piston holes by making sure the edges are bevelled at an angle rather than a sharp 90 degrees angle. This ensures the pistons fit in neater.
The rest of the engine rebuild has included the rocker fingers being refaced and re-boring with bigger pistons
Its been a busy week, with once again, many cars leaving, lots making big milestones and photoshoots!
We were extremely lucky with the weather on Wednesday for our Rolls Royce Corniche shoot at Hintlesham Hall.
This stunning 16th Century Elizabethan hotel created the perfect backdrop to shoot the regal 1973 Rolls Royce Corniche with our friend Giles, who made the perfect model.
We’re currently selling the Rolls Royce, so if you’d like to look this suave, head over to our website to see more about it!
You can see our Behind The Scenes video on our Instagram Reels!
Our ray of sunshine, the Yellow 1973 Triumph TR6 has just left the workshop!
It came in with some issues concerning the gearbox so we swiftly replaced the clutch slave cylinder and it was back up and running in no time!
It was delivered back to its owners this morning.
We’ve recently received another Jensen to restore. Although it’s currently a dull white, it will soon blossom into a beautiful Peony Red! This is a really exciting project for us as it’s going to be an amazing transformation!
Earlier in the week it had its fiberglass body worked on, smoothing down the exterior and adding a layer of stone chip to the inside. You can see that here.
Since then, our technicians Chris and Ant have tidied the metal plate work by welding and smoothing the exterior to make it all uniform. A primer has been added and a DTM satin paint applied on top.
The chrome pieces for the Jensen have also been sourced and cleaned, ready to be applied.
The doors have been refurbished with rust and holes corrected and parts of the inner door having been refurbished.
We’ve recently bought a 1974 VW Beetle for a near future competition car! We cant wait to get started on this beautiful green vehicle!
We’ve also had a lot of work on our other cars such as new trimmings for the Grey Jensen, custom window wipers and pump for the Nissan, new wheels on the MGB, new seat belts on the purple TR6.
You’d be right in saying that this isn’t a red 1960 Jensen 541S. But with a bit of imagination and a lot of hard work from our specialist technicians, this car soon will be a beautiful Peony Red.
However, that’s a few stages away. It’s currently with our technician Chris who is carefully working on the fiberglass body.
With fixings added, holes filled and a black stone-chip applied on the inside of the body, this Jensen is getting closer to its new colour makeover. These alterations are made to make sure the body of the car is aesthetically uniform and ready for the next stage of works.
The next stages will entail grinding out any imperfections and cracks so it can be prepared for the paint-shop.
We popped into our in-house paint and trim shops this afternoon to check out what our classic car technicians are working on today.
Darren, one of our specialist painters is sanding down the fuel tank on our 1972 Peugeot 504. “I’m stripping it right back to the bare metal” Darren explains “thereafter it’ll be ready for it’s protective coating.”
You can see in the background the shell of our Peugeot 504 that Darren’s been stripping and priming ready for her thorough paint job.
Over in the trim shop, Kath and Brian have been working on two separate cars. Both of which, interesting enough, aren’t physically with us, so it’s only their interiors we’re working with right now.
Kath’s unpicking the original interior of our white 1961 Jensen 541S. “I separate all the sections so I can use them as a pattern for the new seats.” Her owner has opted for a mushroom leather interior. So soon we’ll see Kath bringing the new seats to life!
Meanwhile Brian has been working on the seats for our Jaguar XK150. “I’m using the gun to evenly distribute the glue across the foam to make the fabric attach evenly.”
Whether it’s a full restoration on every part of the car or a repair or restoration on one singular part, we love being able to transform these beautiful classics into their owners vision.
Here at Bridge Classic Cars we carry out all our restorations in-house. We have a team of over twenty-plus technicians specialising in engines, mechanics, electrics, bodywork, paintwork and interior trim.
If you have a classic in need of some expert attention, give us a call to see where we can help – 01473 742038
These car parts have all undergone a special cleaning treatment of vapour blasting here at our Pettistree workshop.
The inlet manifold, cam cover, sump and side covers from a Mercedes Pagoda, a 1972 Peugeot 504 and a 1961 Jensen have all had the impressive cleaning treatment and just look at those results!
Vapour blasting is an industrial cleaning method that removes tough grime and grease but is gentle enough to protect valuable and sometimes delicate components, which are often found in classic cars.
This method is perfect for our classics, returning them to their former glory these parts now look brand news, who would have thought they’re from the 60’s and 70’s?
Derek, the proud owner of the 1961 Jensen 541S came along to our workshop this week to choose the colour scheme for the restoration.
After some careful deliberation, Derek finally decided on peony red coupled with kelvin grey for the exterior with a mushroom leather interior.
We think she’ll look excellent!
We will soon be ready to start the restoration of our 1961 Jensen 541S. Another very exciting Jensen project as we get to work restoring the car back to its original, factory spec, finish.
For now, the original engine has been brought in to the workshops from our hangar storage unit so Ady can get to work on the testing and rebuild.
Our recently purchased Jensen 541S has arrived at the showroom. An almost completed restoration, this vehicle will be available for sale soon with the option for us to restore or to restore yourself. It is chassis number 3 so really is one of the most collectable 541s’.
As you can see from the document below, our Jensen (Chassis S1003) was originally Peony Red with a Kelvin Grey roof. The interior was light mushroom.
We’ve just collected our latest showroom addition, this stunning Jensen 541S. The third ever 541 S to roll of the production line, this example is 90 percent restored. If purchased, we can either supply the car in its current condition or restore the vehicle ourselves.
Bridge Classic Cars are award winning Classic Car Restoration and Maintenance specialists. Your pride and joy is in safe hands with our expert Classic Car Technicians. Take a look at our awards here.
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.