Customer, and friend of Bridge Classic Cars, Joerg has sent us these wonderful photos of his beautiful Jensen. Built in 1935, this was the first vehicle ever produced by the Jensen brothers. They named her the White Lady and that name has stuck with the vehicle to this day. A truly special automobile, This prototype […]
This lovely 72 Peugeot 504 will be coming into our workshop in the coming weeks for restorative works. We will be addressing issues with the paintwork, interior, brakes and chrome.
Friend of Bridge Classic Cars, Phil martin has sent us these wonderful pictures of his Ferrari Dino in Long Melford, Suffolk. These stunning vehicles were produced by Ferrari between 1967 – 1976. Named after Enzo Ferrari’s late son, these iconic classics have aged beautifully. We love seeing classics such as this Dino out being enjoyed. […]
Kath has been hard at work on our Jensen interiors. For the convertible roof she has tackled the following stages Dismantled the headlining Marked out new material patterns onto the new fabric Cut out and numbered the fabric pieces Measured out a strips of calico for the convertible loops Cleaned metal bars Sewn headlining back […]
Kath has made a wonderful repair to this BMW’s rear bolster. In order to perfectly match the leather, Kath has come up with an ingenious solution. She’s elected to cut out the damaged area at the bottom of the bolster and stretch the leather over, before stitching it back together. This means that when this […]
Kath, Bridge Classic Cars’ trimmer has created this lovely new Gearstick surround. The VX220’s owner wanted to repair the damaged gaiter so brought it to our trim shop. Great work, Kath!
Our Jaguar E-Type from Beverly Hills Car Club in L.A. has now arrived at the Bridge Classic Cars workshop. This vehicle will undergo a full restoration. We are currently discussing the specification this vehicle will be finished to. The engine and gearbox appear to be in very good condition so may not need to be […]
Our lovely 1973 Series 3 E-Type has made the long journey from L.A. to Felixstowe and has now been picked up by Gordon and Mauro. Whilst at Felixstowe docks we spotted some rather interesting vehicles, including a beautiful Porsche SC. We’ll now be bringing the Jaguar E-Type back to our workshop to begin this total […]
Our Jaguar E-Type Series 1 Racecar has been over to Demand Engineering for a full stainless steel exhaust. We elected to go for a side exit exhaust to suit the ethos behind this lightweight race-car build. Tom has also fitted lightweight perspex glass to the rear windscreen, whilst strengthened glass is fitted to the windscreen.
We’ve made great progress on our beautiful 1960 Jensen 541 R. Bob has installed the wiring harness, front and rear lights and indicators. Paul has fitted the bonnet and bonnet support struts. This restoration is now really starting to come together. The next stages will be to fit the freshly trimmed dashboard and wire in […]
We’ve welcomed in this lovely Ford Consul to our workshop for restorative works. This fabulous Ford is in such wonderful condition. It truly is a credit to it’s owner. Whilst with us, the Consul will have a full brake overhaul and engine restoration works.
Pete has been hard at work refurbishing this gorgeous M3’s braking system. He’s replaced the disks and pads before servicing and refurbishing the brake callipers. Great job, Pete. This M3 is really starting return to her former glory now.
Darren has been hard at work getting our TR6 body ready for paint. He’s carrying out a complete strip down to bare metal, finding and treating rust and carrying out any nessasary bodywork repairs. Our client has requested this vehicle be converted from left hand drive to right hand drive. To do this Darren has […]
Dave has been working on our wonderful 1957 Jensen 541R. He’s had to convert the door hinges to allow the doors to correctly fit. To do this Dave has cut out the old door plate and fabricated a new door plate, using our 1960 Jensen door as reference to match it perfectly. He’s then had […]
Wow, what a beauty! Our completed Jaguar E-Type restoration project was visited by it’s owner at the Bridge Classic Cars workshop. Upon seeing this lovely Jaguar, he couldn’t resist but to take her out for a drive. Seeing clients of ours happy makes the hundreds of hours spent on our restorations well worth while. We […]
This lovely 1975 MG B was restored by us here at Bridge Classic Cars last year. It’s been brought in by its owner to fix some running issues with the engine. Upon inspection Ady assessed that the running issues were caused by low fuel pump pressure which would occur after a few miles of driving. […]
Chris has been working hard getting our MGA body prepared and painted. After bracing and repairing any rust patches in the metalwork, he moved onto preparing the bodywork for paint. The underside was the first part of the vehicle to be painted. Interestingly, the underside of the body is painted in coloured Raptor. Raptor is […]
Here at Bridge Classic Cars, we’ve acquired a very early example of a Morris Mini. We’ve got big plans for this Mini. As pictured, there are still remnants of the original, Cherry Red paintwork. We intend to fully restore this lovely little vehicle to original specification and colour.
This lovely ’62 Jensen 541 S has been collected and brought back to the Bridge Classic Cars workshop. It’s in for paintwork correction and a other remedial works. Our classic car technicians have a wealth of well experience with Jensens. As such, we’ve picked up a lot of Jensen restorations over the years with clients […]
Tom has picked back up work on our 1965 Amphicar, a vehicle that can travel both on land and water. Tom has been busy fabricating new floorboards, using the original, rotten flooring as a template. He’s also refitted all the rubber seals and started assembling the rear seats.
Kath has been busy in Bridge Classic Cars’ Trim Shop. She’s been working on our Daimler Dart hardtop refurbishment. Kath started by removing the old headlining off and stripping back the surface. She then prepared with foam and primed brackets and cut new boarding for the edging to ensure a seamless, tight roof lining. The […]
We’re in the early stages of our TR5 restoration. We need to asses which parts of the vehicle can be refurbished and which components will need to be replaced. As such, we will be stripping down every component and assembling from the ground up to ensure everything is in perfect condition. Pictured below, Andy is […]
Paul has continued work on our lovey 1960 MG A. He’s fitted the rear axle with brakes. The leaf spring suspension and a fuel pump have also recently been installed onto the car. The MG is now ready for the half shafts and brake drums to be fitted next.
Ady, Bridge Classic Cars’ in-house engine specialist has been working on a complete engine restoration on our 1960 MG A engine. Here is a brief rundown of Ady’s process: Totally strip down the engine Unlead the cylinder head to run on modern fuel Install new valve guides and valves Reface the cylinder head to be […]
We were at the 2020 Autosport show, hosed at the NEC in Birmingham. There were an incredible selection of vehicles and trade stands on show. Here are just a few that caught our eye. We also visited the Autosport live action arena to see some live demonstrations. The Live Action Arena is a unique experience. […]
Work continues on our Bedford J-Type. We’ve had to extend the fuel tank pipe to meet the new, wider body shell. We’ve also fabricated brakets for the spare wheel to sit underneath the truck. New exhaust hangar mounts have also been fabricated and installed. Tom has also restored the door stands, preparing, priming and then […]
The Daimler Dart features both a soft, convertible roof as well as a hardtop. This wonderfully restored Dart is in such wonderful overall condition. It’s only current flaw is the loose hard top roof lining. Bridge Classic Cars’ in-house trimmer, Kath has been given the go-ahead by the vehicles new owner to re-trim the roof […]
Mauro has picked up work on our Triumph TR6 Complete restoration. He is making great progress continuing to build up the chassis today. The front hubs, gearbox mounts and engine mounts have now been installed to the car. Mauro has also cleaned up the gearbox and prepared the brake pedals and brake housing for sand […]
Paul has continued work on our 1960 MG A Chassis. Paul is working on the MGA floor panels now. He’s used the old wood to measure up a template before fabricating new wooden floor panels. He’s repaired the front chassis section and prepared it for paintwork. As pictured the rear section of the driveshaft tunnel […]
Our lovely 1944 Morris C8, or to call her by her real name, Ellen, is now complete. We were tasked with rebuilding the engine on this Morris C8. Most of the work was carried out by Ady, Bridge Classic Cars’ engine specialist. Firstly, we removed the engine for full assessment. Ady and Pete had found […]