jensen specialists

So Close Yet So Far

This lovely 1958 Jensen 541R will soon be up for sale with us however there are a few issues that need attending to first. First

Read More »

Happy Customers

Joerg Huesken, the owner of our lovely 1957 Jensen 541R and the 1960 Jensen 541R has recently shared some photo updates on Facebook and we’re

Read More »

2020 In Reflection

It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more

Read More »

Gold Jensen Ready To Go

Our beautiful Gold and Burgundy 1962 Jensen 541S is now finished and will return back to its owner this weekend. We’re delighted at how shiny

Read More »

Silver Jensen’s modified brakes

Our lovely silver 1959 541R Jensen brake pipes have been refurbished, as well as the kingpins and bushes rebuilt by our technician Paul.

To Chrome Or Not To Chrome

The process of restoring a car is rarely linear, but that’s all part of the car’s journey. The plan for the 1957 Jensen 541R was to have original chrome pieces installed onto the side of the doors however our client decided that he didn’t want these pieces and to leave them off for now. We’ve welded the holes closed and will begin to paint over them. It’s crucial for us that our clients have the ability and freedom to pitch in ideas and change their minds, after all, these restorations are all bespoke for a reason!

Almost across the finishing lines

The black Jensen has had a series of road tests, edging it closer and closer to being completed. We’re working our way through what John likes to call the ‘snag list’ which is ultimately a list of any teething issues that are highlighted in being driven. On the list is aligning the steering wheel, modifying the rear heater fan and heater motor.

Navy Jensen Renovations

Paul has been working on some of the mechanisms in the navy 1961 541S Jensen. He’s stripped down the front suspension ready for new parts.

He’s also sorted through the hand brake components which are now ready for assembly. The new brake pipes have been made and fitted to the rear brakes and run from the master cylinder to the rear.

Peony Red Jensen Bodywork Continues

Parts of our 1960 541S Jensen are sat in our paint bay whilst Chris works on them. The door hinges have been sandblasted, the door frames and door skins have been painted, and the boot, front bumper part and wheels are ready for primer. The black part for the boot rubber has also been painted.

Can’t Catch A Jensen Brake!

Its Jensen central here in the workshop! Our other Navy Jensen is currently undergoing some more work after the owner gave us the go-ahead to continue their restoration.

Paul has cleaned the brake discs, removing existing grease sat on the elements. Paul has also taken apart the disks and taken out some other debris that had sat in there. We’ve also fitted new brake lines and callipers on the back. The brake pipes have been redone, as well as the kingpins and bushes replaced. The front brakes have be been upgraded and the new brake lines have been fitted.

So Close Yet So Far

This lovely 1958 Jensen 541R will soon be up for sale with us however there are a few issues that need attending to first.

First of all, the Dynamo needs to be refurbished as although it technically works fine, there’s a small charging fault with it.

There’s an issue with the water pump which has a severe leak meaning it will need rebuilding.

Black Jensen Paint Touch Ups

Our 1960 Jensen 541R is currently in the final, final stages. It is currently sat in the paint shop for some minor corrections as we believe that perfection is the only option when it comes to our restorations.

On its road test, our Jensen performed well and only showed small teething issues but otherwise its ready to go!

Grey Jensen Door Shimmy

The Grey Jensen is having some small alterations made to its doors. Currently, as they sit, the doors are slightly too wide to fit into the B-post, so we have managed to make some subtle alterations to the door and the aluminium trim to allow the door itself to fit more comfortably into the body.

Rust Bust On The Peony Red Jensen

The restoration to the Peony Red Jensen’s doors continues. James is working on correcting the corrosion damage by welding and fabricating new parts to replace the corroded elements. Both doors are bespoke and custom to the car, so James, one of our classic car specialists, is having to make all his adjustments bespoke and unique to the car.

You can see the process here:

New Doors, New Opportunities

Our lovely Grey 1967 541R Jensen has had some alterations done to the doors. We have cut the lip of the nearside and outer-side doors so that the door cards will fit. We’ve then re-welded and re-fitted the outer-side door chrome and made sure the door closes and opens, and the windows slide up and down.

Peony Red Bodywork

Our Peony Red Jensen has been masked and primed and is now ready for paint.

Lilac Jensen Perfections

Gordon’s (soon to be) Lilac Jensen 541R is currently being prepped for paint. Trevor is smoothing out any bumps and cracks as well as applying spray on primer and filler before the first layers of paint is applied.

Happy Customers

Joerg Huesken, the owner of our lovely 1957 Jensen 541R and the 1960 Jensen 541R has recently shared some photo updates on Facebook and we’re delighted to have the shout out!

Click here to see his post!

New Doors For Our Peony Jensen

Brian from our trim shop has been working on creating more interior fittings for our 1960 Peony Red Jensen 541S. The first steps in creating new door panels were to remove the old metal from the door panel board and make new panels from hardboard. The metal has been cut out and riveted, ready to be put in place. Brian then glued some foam to the door panel, cut out new leather and glued the sewn door panel to the leather panel. Once the parts were fixed together, Brian then turned the edges over. The next step was to then cut out the leather for the infill panel and glue that to the door panel.

A new armrest has also been fitted to the door panel. Brian removed the old cover from the armrest and made a new one, including new foam and a new pocket. Fresh piping has been fitted to the top edge of the pocket and foam support added. Chrome has then been added to the armrest trim.

Chris has removed the door skins from the door frames ready to have the paint taken off sandblasted. This is to combat the corrosion found inside the doors. Once this is completed, epoxy primer is applied inside and out. The bonnet and boot have been lined up and rubbed down as well. Holes have been marked out on the boot and are ready to re-drill.

James has removed both Aluminium door skins from the steel frames to work on the corrosion too. We will be using modern materials to avoid corrision occurring in the future rather than the original strips of canvas fabric to act as a barrier.

Here you can see the conditions of the door panels which are showing serious signs of corrosion and rust damage, including a series of holes appearing along the edge.

Another Jensen In The Workshop

We weren’t kidding when we said we’re Jensen specialists! We’ve welcomed another beautiful Jensen into the workshop this week. This 1959 Silver Jensen 541R has come in for a diagnosis on the engine.

We’ve assessed the vehicle and have discovered a list of faults including the need for new core plugs, new rocker shaft and for an oil leak to be corrected. We’re are glad to find that the engine starts despite the faults. We are currently in conversation to see if the client wants the engine to be taken apart and refurbished or not.

After speaking to the client, we’ve decided to start addressing the faults without carrying out a full engine rebuild as this car will soon be used as an everyday car. Ady, out engine specialist, has had the car up and running as well as removing the old core plugs, cleaning the waterways and fitting new core plugs/

Check-In For The Navy Jensen

The 1961 Navy Jensen 541S is up and running for now however we are waiting on the client to see if they would like any more refurbishments done as this Jensen has been their own project which we’ve helped out on. It currently doesn’t have any brakes and there are a handful of other components missing that need fitting. Watch this space!

Much like our Jaguar MKVII, Ady had to link the battery to the coil to get the Jensen started as there was a diagnosed wiring fault between the ignition and the coil.

Carburettor Corrections

Our 1958 Navy Jensen 541R has recently been up and running however we noticed that there was a petrol leak in the float of the carburettor as well as a leak in the clutch pipe. Once these elements have been repaired, we can take this Jensen out onto the road to see how it drives. This beautiful Jensen will soon be up for sale so keep your eyes peeled!

Last week Darren focused on polishing and correcting the body panels of the Jensen, ensuring that the finishing paintwork is perfect.

James has been welding the underside of the Jensen, fixing a hole in the exhaust. This has been done by making and welding a seal over the hole.

Grey Jensen’s Re-alignment

Our 1957 Grey Jensen is progressing well in its restoration journey with the majority of its interior trim fitted. It still needs its windscreen and Perspex back windows fitted as well as the door panel trims but the current job in hand is to re-align the doors.

We noticed the inner panels of the door were not sitting correctly so decided to investigate and found that some of the elements need refurbishing.

Black Jensen’s Final Tweaks

Our stunning 1960 Black Jensen 541R is on its final leg of its restoration journey and will soon be returned back to its owner. The recent additions include the oil filter which has recently been re-fitted, the start motor was installed along with a new exhaust. All the components are currently being put back into the car before it has its final paint correction and can then be road tested.

A large part of the final tweaks in a restoration project is reassembling all of the elements after parts have been fitted, which is usually the last stage before the road test.

Peony Red Jensen Developments

Our 1960 Peony red Jensen 541S is making good progress in the workshop. Here are the latest developments.

Fabrication Bay

Our technician Chris has been working on the Jensen body in the fabrication bay. He’s been ‘gapping’ the doors so they look and fit the same around the sides. He’s also cut and ground both sides, added fibreglass to the bonnet to close the gap up and made a boot catch plate. Finally, Chris has marked the holes and tapping them up to make sure all the bolts fitted.

Trim Shop

Brian has been making a new door panel board from hardboard in the trim shop. This has been done by removing the armrest from the pocket section, removing the metal trim and old cover from the armrest and then making a new pattern for the cover.

Once a pattern has been made, Brian can cut it out from leather, sew on the new cover and fit it to the armrest by glueing and stapling it in place. Brian has also added metal trim to the armrest and cut leather out to make a pocket section. This was then glued in place.

The edges have been turned around to neaten the cover and new piping has been sewn in. Brian then needed to glue the inner metal to the foam, and fit the metal in place. The next step was to then glue the rest of the foam to the inner side of the pocket and fit the armrest to the pocket section. Once fitted, the armrest has been secured with screws and riveting support bar to the back.

Kath has also been working on the Jensen. She’s taken off the old cover from the dashboard and removed the old glue as well, ready to the rub down the front and back in preparation for new material.

Once cleaned down, Kath can mark out the new material and glue both surfaces to stick the material in place. To neaten it up, the material is turned over the edges and the dash holes are trimmed around so that the new cover sits comfortably. Once both sides were done and had followed the same process, Kath then glued along where the two pieces of material meet.

The dash top also needed to be refurbished. For this, Kath removed the two old covers and cut out new material ready to cover the dash top element. Once the material had been marked around the top, it could then be glued along one edge, the material turned over and the corners neatened up.

Lydia has also been working on the Peony Red Jensen interior. She’s been focusing on rear squab by measuring out all the leather, assembling the pieces together and sewing it all up. Lydia then prepared for the fitting of the cover on to the foam and board. She marked out new plywood to replace old worn out original. The next step was to then add wadding to the original foam so it maintains a nice shape. After all this was done, it was time to fit the cover over the squab.

Suspension Building For The Jensen

Our 1958 Jensen 541R is currently having its suspension fixed and rear suspension bolts replaced as the previous bolts had no locking facilities, meaning they could come loose.

The rear axel straps also need to be fitted but these will be made in our workshop first and then added. We like to make our own elements for the cars as much as we can to make sure the parts fit perfectly onto each vehicle. This ensures that every classic goes away with parts especially made for them.

2020 In Reflection

It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more unique and interesting cars, expanded the team and took new ventures.

2020’s Winners

This year we introduced our competitions back in May. With an uncertain year ahead of us, we wanted to provide some excitement to our followers, and what better way than to offer the chance of winning a car for less than £20! It wasn’t easy at first, but now with over 21 winners and up to 4 competition cars running at the same time, we’re doing better than ever. So far we’ve given away £561,197.00 worth of classic cars!

This week we’re delivering our latest winning cars, our 1974 VW Beetle that was won by Colin Knight and our 1995 Jaguar XJ6 who was won by Nick Nicola just before Christmas! We’re being careful to make the delivery as safe as possible, complying with tier 4 guidelines but we can’t wait to see Colin and Nick’s reactions!

1967 Jaguar E-Type Series 1 Race Car Replica Completion

Its been a long restoration, but we were delighted to announce the completion of our very own project, our 1967 Jaguar E-Type Series 1 Race Car Replica. Its come a long way from the decrepit shell we started with in 2017. Every detail, right down to the colour has been custom made and designed. This truly is a Bridge Classic Car. You can see it’s story here.

The Year Of The Jensen

We love every and any classic car and are in turn, we’re equipped to fix and restore any classic too, but 2020 for us was the year of the Jensen. We’ve had eight 541R/541S’s in this year, some of which are still with us being completed. With only 193 Jensen 541R’s and 127 541S’s ever made worldwide, to have so many in at all really is outstanding, let alone all at the same time.

The 541R models were manufactured between 1957 and 1960 when they were later replaced by the 541S that ran from 1960 to 1962. Whilst each car is incredibly unique with its story and bespoke restoration, they are also very similar, and as you can imagine, with 8 very similar cars in at the same time, it took a while to get our heads around which was which when referring to them.

Expanding the team

2020 saw the birth of the Trim Shop. Whilst we’d had individual trim specialists working with us before, we were yet to dedicate a department to it! Last year saw the creation of the Trim Shop, giving the speciality its own workshop and team which continued to grow throughout the year. Originally just Kath and Brian, we have welcomed a new face to the team recently. Lydia has now joined us and is another much-valued member of the trim shop. Having our own trim department allows us to continue keeping all our restorations under one roof, limiting the outsourcing as much as we can.

We’ve also had Ellie join this year, adding to the marketing department. Previously we had just Freddie, and briefly Charlotte doing our marketing, but as the company started to grow, we found the need to take on another set of hands for our marketing and visuals.

One of a kind – Chevron B20

We’ve had some very unique cars in this year, including this original 1972 Chevron B20. Its seen top racing drivers, international races and a big crash in its lifetime and nowWe’re selling this on behalf of the owner but in the meantime, we’re enjoying housing this incredible special car. You can find out more about its history on our blogs.

Introduction of editorial shoots

The latter part of this year saw us start shooting some of our cars in a more editorial and creative style. Whilst we’ve always organised high-quality shoots of all our competition and for sale cars, we decided to add models to some of the shoots to make them a bit different.

Now we have both Freddie and Ellie on shoots, it means we can also get behind the scene insights into our shoots.

Bespoke restorations; A tribute

Another interesting and heartfelt restoration this year was our 1972 Jaguar E-Type Series 3 that we restored. In memory of their late uncle, the owner paid to have a commemorative plaque fitted by the handbrake. We also embedded one of their Uncle’s favourite cufflinks above it as well. As we always say, each restoration is special and every car carries its own stories, but this one was particularly special.

Car Show 2020

Last January, we had our open morning car show that proved to be incredibly popular. After having to cancel our 2021 January open morning show, we hope to organise one for later this year.

Peony Red Jensen Update

We’ve taken apart the old rear quarter panels on our 1960 Peony Red Jensen 541s, ready to make new ones. This is done by cutting out new mill board panels, cutting out new plywood panels, fitting new plywood panel to original top wood, glueing & stapling mill board panel to plywood panel, riveting brackets to edge of the panel, adding foam padding to cover panel and then glueing & stapling the leather cover to the panel.

A newly fabricated bonnet has been fitted too.

Jensen glove box door in mushroom interior has been made by Brian in the trim shop. This involved removing old vinyl, cutting new vinyl, sticking it onto the door, trimming around the edge.

The dash has also been renovated. Brian has removed the old cover, sanded it down to remove the old glue and leather, mark out the new material, and glue up the parts. Once the glue had dried it was stretched and the ends trimmed.

Suspension Concluded On The Navy Jensen

The front suspension is back together on our 1958 Jensen 541R. The modifications have concluded with the brake flex pipe has been relocated to avoid touching the wheel.

The suspension spring strength had to be reduced to allow work to be done on it to ensure the component wasn’t under too much pressure.

Suspense Builds For Jensen

The suspension on the front of our 1958 541R Jensen is currently being tweaked. The bushings need to be reamed and resized so they fit better. For this, we’re sending the parts away to be completed.

1957 Jensen’s Trim Additions

Our 1957 Grey Jensen 541R has had its dash pad rail, roof pad and boot refurbished by our specialists in the trim shop.

Brian has removed the old cover of the dash rail, added more foam and wadding, glued on a new cover, added leather around the brackets and fit it all back onto the dash board.

The ceiling pad has also been refurbished. The old cover has been removed, as have the brackets and vinyl. New wadding has been glued into place over the original foam. Fresh vinyl has been cut and glued on, the edges folded over and the brackets refitted. Once these steps were completed, the ceiling pad was fitted back in again.

The boot lid has had new foam added into its indentations. The carpet has been glued onto the boot lid, leaving holes for the boot support rods and latch.

Gordon’s Jensen Gets New Metal Work

Our director Gordon, Craig’s father, also has a car in with us at the moment, however it doesn’t look much like a car currently..

This is a 1960 541R Jensen which will, when reassembled, be painted a two tone purple.

So far its been welded and hand crafted in our fabrication bay. The rear arches and floors have all been hand fabricated.

We’re expecting to see the completion of this Jensen by the end of 2021.

Gold Jensen Ready To Go

Our beautiful Gold and Burgundy 1962 Jensen 541S is now finished and will return back to its owner this weekend. We’re delighted at how shiny and new this Jensen looks again!

Our Jensen empire, once standing at a grand total of 8 is now beginning to decrease again.

Black Jensen’s Up And Running Again

The Black 1960 Jensen 541R is now up and running for the first time. Our workshop manager, John, took it out for a quick spin to see how it runs and determine what needs to happen next.

After taking it for a spin, all that’s left now is to fine tune the clutch, set up the carburettors and ensure the coolant flows well. This beautiful Jensen is nearly completed and we’re all very excited to see it finished and on the road.