Jensen 541s

Happy Customers

Joerg Huesken, the owner of our lovely 1957 Jensen 541R and the 1960 Jensen 541R has recently shared some photo updates on Facebook and we’re

Read More »

2020 In Reflection

It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more

Read More »

Gold Jensen Ready To Go

Our beautiful Gold and Burgundy 1962 Jensen 541S is now finished and will return back to its owner this weekend. We’re delighted at how shiny

Read More »

Jensen Assembly

Our Peony Red 1960 Jensen 541S is getting closer and closer to evolving into a beautiful Peony Red classic. Before it can be painted, our

Read More »

Workshop Walkabout

Our week has been very busy with two photoshoots at the start of the week and new projects arriving in the workshop. Tr6’s new hood

Read More »

The Mystery Stopper

Some drama in the engine workshop! All was seemingly well with the engine re-build however, unbeknown to us, the dipstick tube had previously broken off

Read More »

Sitting Tight

More work has been done on our 1960 Peony red Jensen 541S. The latest instalments are the seat covers and pockets that have been made

Read More »

The Girl In Red

You’d be right in saying that this isn’t a red 1960 Jensen 541S. But with a bit of imagination and a lot of hard work

Read More »

Happy Customers

Joerg Huesken, the owner of our lovely 1957 Jensen 541R and the 1960 Jensen 541R has recently shared some photo updates on Facebook and we’re delighted to have the shout out!

Click here to see his post!

New Doors For Our Peony Jensen

Brian from our trim shop has been working on creating more interior fittings for our 1960 Peony Red Jensen 541S. The first steps in creating new door panels were to remove the old metal from the door panel board and make new panels from hardboard. The metal has been cut out and riveted, ready to be put in place. Brian then glued some foam to the door panel, cut out new leather and glued the sewn door panel to the leather panel. Once the parts were fixed together, Brian then turned the edges over. The next step was to then cut out the leather for the infill panel and glue that to the door panel.

A new armrest has also been fitted to the door panel. Brian removed the old cover from the armrest and made a new one, including new foam and a new pocket. Fresh piping has been fitted to the top edge of the pocket and foam support added. Chrome has then been added to the armrest trim.

Chris has removed the door skins from the door frames ready to have the paint taken off sandblasted. This is to combat the corrosion found inside the doors. Once this is completed, epoxy primer is applied inside and out. The bonnet and boot have been lined up and rubbed down as well. Holes have been marked out on the boot and are ready to re-drill.

James has removed both Aluminium door skins from the steel frames to work on the corrosion too. We will be using modern materials to avoid corrision occurring in the future rather than the original strips of canvas fabric to act as a barrier.

Here you can see the conditions of the door panels which are showing serious signs of corrosion and rust damage, including a series of holes appearing along the edge.

Check-In For The Navy Jensen

The 1961 Navy Jensen 541S is up and running for now however we are waiting on the client to see if they would like any more refurbishments done as this Jensen has been their own project which we’ve helped out on. It currently doesn’t have any brakes and there are a handful of other components missing that need fitting. Watch this space!

Much like our Jaguar MKVII, Ady had to link the battery to the coil to get the Jensen started as there was a diagnosed wiring fault between the ignition and the coil.

Peony Red Jensen Developments

Our 1960 Peony red Jensen 541S is making good progress in the workshop. Here are the latest developments.

Fabrication Bay

Our technician Chris has been working on the Jensen body in the fabrication bay. He’s been ‘gapping’ the doors so they look and fit the same around the sides. He’s also cut and ground both sides, added fibreglass to the bonnet to close the gap up and made a boot catch plate. Finally, Chris has marked the holes and tapping them up to make sure all the bolts fitted.

Trim Shop

Brian has been making a new door panel board from hardboard in the trim shop. This has been done by removing the armrest from the pocket section, removing the metal trim and old cover from the armrest and then making a new pattern for the cover.

Once a pattern has been made, Brian can cut it out from leather, sew on the new cover and fit it to the armrest by glueing and stapling it in place. Brian has also added metal trim to the armrest and cut leather out to make a pocket section. This was then glued in place.

The edges have been turned around to neaten the cover and new piping has been sewn in. Brian then needed to glue the inner metal to the foam, and fit the metal in place. The next step was to then glue the rest of the foam to the inner side of the pocket and fit the armrest to the pocket section. Once fitted, the armrest has been secured with screws and riveting support bar to the back.

Kath has also been working on the Jensen. She’s taken off the old cover from the dashboard and removed the old glue as well, ready to the rub down the front and back in preparation for new material.

Once cleaned down, Kath can mark out the new material and glue both surfaces to stick the material in place. To neaten it up, the material is turned over the edges and the dash holes are trimmed around so that the new cover sits comfortably. Once both sides were done and had followed the same process, Kath then glued along where the two pieces of material meet.

The dash top also needed to be refurbished. For this, Kath removed the two old covers and cut out new material ready to cover the dash top element. Once the material had been marked around the top, it could then be glued along one edge, the material turned over and the corners neatened up.

Lydia has also been working on the Peony Red Jensen interior. She’s been focusing on rear squab by measuring out all the leather, assembling the pieces together and sewing it all up. Lydia then prepared for the fitting of the cover on to the foam and board. She marked out new plywood to replace old worn out original. The next step was to then add wadding to the original foam so it maintains a nice shape. After all this was done, it was time to fit the cover over the squab.

2020 In Reflection

It goes without saying, 2020 has been tough for everyone but there have been some positives! Bridge Classic Cars turned 16, we welcomed in more unique and interesting cars, expanded the team and took new ventures.

2020’s Winners

This year we introduced our competitions back in May. With an uncertain year ahead of us, we wanted to provide some excitement to our followers, and what better way than to offer the chance of winning a car for less than £20! It wasn’t easy at first, but now with over 21 winners and up to 4 competition cars running at the same time, we’re doing better than ever. So far we’ve given away £561,197.00 worth of classic cars!

This week we’re delivering our latest winning cars, our 1974 VW Beetle that was won by Colin Knight and our 1995 Jaguar XJ6 who was won by Nick Nicola just before Christmas! We’re being careful to make the delivery as safe as possible, complying with tier 4 guidelines but we can’t wait to see Colin and Nick’s reactions!

1967 Jaguar E-Type Series 1 Race Car Replica Completion

Its been a long restoration, but we were delighted to announce the completion of our very own project, our 1967 Jaguar E-Type Series 1 Race Car Replica. Its come a long way from the decrepit shell we started with in 2017. Every detail, right down to the colour has been custom made and designed. This truly is a Bridge Classic Car. You can see it’s story here.

The Year Of The Jensen

We love every and any classic car and are in turn, we’re equipped to fix and restore any classic too, but 2020 for us was the year of the Jensen. We’ve had eight 541R/541S’s in this year, some of which are still with us being completed. With only 193 Jensen 541R’s and 127 541S’s ever made worldwide, to have so many in at all really is outstanding, let alone all at the same time.

The 541R models were manufactured between 1957 and 1960 when they were later replaced by the 541S that ran from 1960 to 1962. Whilst each car is incredibly unique with its story and bespoke restoration, they are also very similar, and as you can imagine, with 8 very similar cars in at the same time, it took a while to get our heads around which was which when referring to them.

Expanding the team

2020 saw the birth of the Trim Shop. Whilst we’d had individual trim specialists working with us before, we were yet to dedicate a department to it! Last year saw the creation of the Trim Shop, giving the speciality its own workshop and team which continued to grow throughout the year. Originally just Kath and Brian, we have welcomed a new face to the team recently. Lydia has now joined us and is another much-valued member of the trim shop. Having our own trim department allows us to continue keeping all our restorations under one roof, limiting the outsourcing as much as we can.

We’ve also had Ellie join this year, adding to the marketing department. Previously we had just Freddie, and briefly Charlotte doing our marketing, but as the company started to grow, we found the need to take on another set of hands for our marketing and visuals.

One of a kind – Chevron B20

We’ve had some very unique cars in this year, including this original 1972 Chevron B20. Its seen top racing drivers, international races and a big crash in its lifetime and nowWe’re selling this on behalf of the owner but in the meantime, we’re enjoying housing this incredible special car. You can find out more about its history on our blogs.

Introduction of editorial shoots

The latter part of this year saw us start shooting some of our cars in a more editorial and creative style. Whilst we’ve always organised high-quality shoots of all our competition and for sale cars, we decided to add models to some of the shoots to make them a bit different.

Now we have both Freddie and Ellie on shoots, it means we can also get behind the scene insights into our shoots.

Bespoke restorations; A tribute

Another interesting and heartfelt restoration this year was our 1972 Jaguar E-Type Series 3 that we restored. In memory of their late uncle, the owner paid to have a commemorative plaque fitted by the handbrake. We also embedded one of their Uncle’s favourite cufflinks above it as well. As we always say, each restoration is special and every car carries its own stories, but this one was particularly special.

Car Show 2020

Last January, we had our open morning car show that proved to be incredibly popular. After having to cancel our 2021 January open morning show, we hope to organise one for later this year.

Peony Red Jensen Update

We’ve taken apart the old rear quarter panels on our 1960 Peony Red Jensen 541s, ready to make new ones. This is done by cutting out new mill board panels, cutting out new plywood panels, fitting new plywood panel to original top wood, glueing & stapling mill board panel to plywood panel, riveting brackets to edge of the panel, adding foam padding to cover panel and then glueing & stapling the leather cover to the panel.

A newly fabricated bonnet has been fitted too.

Jensen glove box door in mushroom interior has been made by Brian in the trim shop. This involved removing old vinyl, cutting new vinyl, sticking it onto the door, trimming around the edge.

The dash has also been renovated. Brian has removed the old cover, sanded it down to remove the old glue and leather, mark out the new material, and glue up the parts. Once the glue had dried it was stretched and the ends trimmed.

Gold Jensen Ready To Go

Our beautiful Gold and Burgundy 1962 Jensen 541S is now finished and will return back to its owner this weekend. We’re delighted at how shiny and new this Jensen looks again!

Our Jensen empire, once standing at a grand total of 8 is now beginning to decrease again.

Jensen Assembly

Our Peony Red 1960 Jensen 541S is getting closer and closer to evolving into a beautiful Peony Red classic. Before it can be painted, our workshop technicians Paul and Scott are assembling and fitting the parts before its sent back to the Fabrication bay for it to be properly fitted.

Once the fabrication bay has finished with the body work, it’ll be placed in the capable hands of our paint shop pro, Darren, who will begin the paint and prep process.

Here’s a reminder of the colours we’ve chosen for our Peony Red Jensen. It’s going to be dual-toned, with a grey roof and peony red body. These are the colours requested by the client.

Workshop Walkabout

Our week has been very busy with two photoshoots at the start of the week and new projects arriving in the workshop.

Tr6’s new hood cover

Our trim shop has been fitting the frame to the TR6. This includes riveting straps to the frame bars, marking positions for fasteners around the rear of the hood and fitting those fasteners in position. The next step is to clip the front edge of the cover in place while the fasteners are riveted to the metal bar inside the hood.

Brian, one of our trim shop specialists the glued velcro to the sidebars and screwed in metal channels for the side rubbers. Once all the fasteners have been fitted, Brian could then fit the cover to the car.

Lotus Esprit

Our Lotus Esprit has had a new water pipe fabricated from stainless steel to replace the old aluminium one that had rusted. This was made by hand in our workshop.

Jaguar E-Type Race Car

Although finish, the 1967 Jaguar E-type series 1 race car is always an ongoing project with new alterations being done frequently. This week a new door latch and release cable was fitted.

Triumph TR5

Our 1965 Triumph TR5 has had its split dashboard repaired. Refurbished by hand in our workshop, its now ready to be re-installed.

Peony Red Jensen

The trim shop has added wadding to the rear-seat centre section, glued the cover at front & back down and turned the fabric around the hinge at the back. The seats have also had the sides glued and pulled tight. Wadding has been added as well as extra foam to the side section of the rear seat base.

Primer has been done and its now ready for the fiberglass to be smoothed and corrected and the colour to be applied.

1962 Gold Jensen 541S

The Gold and Burgundy Jensen 541S had an issue with its engine which Ady, our engine specialist soon diagnosed as a cracked oil way. Oil was leaking into the water pipe. To discover the issue, Ady had to fill the oil way with water and push air through the pipe to identify the issue.

Photoshoots behind the scenes

Both Monday and Tuesday were jam-packed for our marketing team with two photoshoots for our race cars, the Jaguar E-Type and the Chevron B20. We’re excited to share the results of these shoots. A big thank you to Ellough Park in Beccles for allowing us to shoot on their track and to Mark O’Connor who featured in the Jaguar E-Type photos. As an F1 test driver and stunt driver, he was the perfect person to get behind the wheel and model for the shoot!

The Mystery Stopper

Some drama in the engine workshop! All was seemingly well with the engine re-build however, unbeknown to us, the dipstick tube had previously broken off inside the cylinder block. If Ady’s keen eyes hadn’t noticed, this would have led to a total engine strip and rebuild in the workshop later down the line!

Luckily he noticed and managed to remove it before it did too much damage. A new one has now been fitted.

The Peony Red Jensen 541S has had its engine refurbished by our engine specialist. A new steel tube has been installed as well as a distributor, water pump and oil filter housing.

Sitting Tight

More work has been done on our 1960 Peony red Jensen 541S. The latest instalments are the seat covers and pockets that have been made by our trim shop. This involved marking out the leather for the seats, sewing the piping and side bands on, making and sewing on the skirt, and then creating the pockets. Once all these elements have been carefully created, that can be put together.

Our engine specialist, Ady is in the process of rebuilding the engine. So far the bottom end is done and its awaiting the cylinder heads to be attached.

Reconditioned Cylinder Heads For The Gold Jensen

Our 1962 Gold and Burgundy Jensen 541S has had its cylinder head reconditioned after multiple cracks were discovered that was causing water and oil to mix.

The cylinder was removed and sent off for a pressure test at Coltec where the cracks were discovered. The cylinder head was then unleaded and replaced.

Peony Red Jensen’s New Parts

Our specialist technicians have been working hard on the 1960 Jensen 541S restoration. The latest refurbishments include smoothing and correcting the doors by filling any holes, taking out rust and installing custom made metal pieces.

Our engine specialist Ady carried out a full engine rebuild and has modified the piston holes by making sure the edges are bevelled at an angle rather than a sharp 90 degrees angle. This ensures the pistons fit in neater.

The rest of the engine rebuild has included the rocker fingers being refaced and re-boring with bigger pistons

The Girl In Red

You’d be right in saying that this isn’t a red 1960 Jensen 541S. But with a bit of imagination and a lot of hard work from our specialist technicians, this car soon will be a beautiful Peony Red.

However, that’s a few stages away. It’s currently with our technician Chris who is carefully working on the fiberglass body.

With fixings added, holes filled and a black stone-chip applied on the inside of the body, this Jensen is getting closer to its new colour makeover. These alterations are made to make sure the body of the car is aesthetically uniform and ready for the next stage of works.

The next stages will entail grinding out any imperfections and cracks so it can be prepared for the paint-shop.

Powering Up Our Jensen

Our stunning 1962 Jensen 541S is eagerly anticipated at her new home. Her new owners came to test drive her around the beautiful grounds at our Hanger Showroom at RAF Bentwaters, Suffolk. Needless to say, they fell in love with her instantly.

One of the requests of the new owner is to have power steering installed, in what otherwise would be the original 1960’s steering system. These modernisation requests are favoured with many classics, making these stunning cars more usable and reliable.

The original steering column has been sent to our specialist modifiers in Holland. Once they’ve done the modifications they’ll send it back. We can then refit it to the car and get the power steering working.

What is already a lovely car to drive will be even smoother thanks to this seamless modification.

We can modernise classic cars to include power steering, Bluetooth, air-con or even to go fully electric. Get in touch with us today to find out more!

The Joys of the Jensen

We love classic Jensen’s here at Bridge Classic Cars. So much so, that we have five in for restoration work as we speak!

Along with our projects, we also recently sold our 1962 Jensen 541S. This stunning Jensen was officially verified by Concours d’Elegance and the Jensen Owner’s Club with a incredible score of 386/400. More on this incredible car and it’s mounting accolades can be found here.

We’re always delighted when a beautiful classic finds a new home and leaves our showroom. As much as we love seeing these gorgeous cars every day, we’d much prefer them to be driven and adored by their new owners.

Meanwhile, in the workshop, our Jensen restorations are well underway. First up, our classic car technician Dave has been building a fabricated rear gearbox mount for our 1958 Jensen 541R.

Dave’s also been working on our black 1960 Jensen 541R. “I adjusted the plate mods for the steering column” he explains “the steering wheel was in the wrong position, so now it can be centralised in the dash.”

The fuel pumps have also been repaired by Dave along with the repairing the fuel leaks from the carburettors, achieved by tightening all the bolts.

Lastly, Ady our engine technician has been reconditioning the distributor on our 1961 Jensen 541R. “I’ve also cleaned and balanced the conrods,” Ady explains.

There’s still lots to do across all our Jensen’s. Each car brings it’s own history and therefore, it’s own challenges. And there’s nothing we like more here at Bridge Classic Cars than a challenge!

The Jensen’s Get New Grilles

Both the 1957 Jensen 541R and the 1961 Jensen 541S have been treated to fully repaired bonnet grilles this week, courtesy of our expert technician Dave.

“These aluminium hooks can be flimsy and snap off”, Dave explains, snapping one of them off with ease. “So, I’ve custom built stronger ones to replace them”. Dave then welded the new hooks onto each grille to keep them snug and secure in the centre of the bonnet.

One of many finishing touches that will contribute to the final look of the Jensen’s iconic bonnet.

Derek Spec’s His Jensen

Derek, the proud owner of the 1961 Jensen 541S came along to our workshop this week to choose the colour scheme for the restoration.

After some careful deliberation, Derek finally decided on peony red coupled with kelvin grey for the exterior with a mushroom leather interior.

We think she’ll look excellent!

1957 Jensen 541R – Uranograu

First glimpse of our 1957 Jensen 541R in its brand new suit.

A unique two tone finish; with the body in Uranograu or Urano Grey and we have matched the roof to the wheels.

Here we have images of our Jensen in final stage primer before top coating the individual panels and body shell.

The car will now head back into the workshops to be fitted up with newly refurbished parts.

Jensen 541S Grille and Bonnet Adjustment

Dave has started work on our beautiful 1962 Jensen 541S. The vehicle is in for some small, remedial tasks. A new front grille is on the list to be fitted and here at Bridge Classic Cars we have manufactured the tooling to replicate the S grille and have been one of the main suppliers of the Jensen 541S grille.

The bonnet latches also need adjusting and the engine is not running anywhere near as beautifully as it should be.