Progress – 1979 Arrow Ferrari Daytona Coming Together
The workshop team have been working on making progress on the 1979 Arrow Ferrari Daytona that is in our workshop. The team began work on
The workshop team have been working on making progress on the 1979 Arrow Ferrari Daytona that is in our workshop. The team began work on
The trim team at the Bridge Classic Cars restoration workshop have been busy installing the finer details of the interior of the 1979 Arrow Ferrari
The trim team at Bridge Classic Cars have been working on the interior of the 1979 Arrow Ferrari Daytona with several key jobs finished off
The trim team at the Bridge Classic Cars Suffolk HQ have been working on getting a few more jobs done on the interior of the
The restoration workshop have been working on some of the smaller details of the 1979 Arrow Ferrari Daytona. This time, it was the boot lid
The restoration team at the Bridge Classic Cars Suffolk HQ have made progress on the 1979 Arrow Ferrari Daytona. This time, they’ve been perfecting the
The in-house trim team at Bridge Classic Cars have been busy hand-making several key pieces for the 1979 Arrow Ferrari Daytona. Starting in the boot
The restoration team at the Bridge Classic Cars Suffolk HQ have been working on making progress on several key jobs to do with the 1979
The in-house trim shop at Bridge Classic Cars have begun the process of creating the one-off carpet set for the 1979 Arrow Ferrari Daytona. Our
The 1979 Arrow Ferrari Daytona in the Bridge Classic Cars workshop has been having its doors, door cards and centre console modified to have several
The workshop at Bridge Classic Cars has worked on getting the AC/Heater Unit fitted into the interior of the 1979 Arrow Ferrari Daytona. Scott has
The restoration workshop at Bridge Classic Cars have been working on getting several crucial pieces of the 1979 Arrow Ferrari Daytona restoration completed. Scott has
The fibreglass dashboard on the 1979 Arrow Ferrari Daytona is being worked on by the trim team here at the Bridge Classic Cars Suffolk HQ.
The glovebox of the 1979 Arrow Ferrari Daytona is being worked on by our restoration workshop at the Bridge Classic Cars Suffolk HQ. It’s having
With the engine bay wiring loom routed for the 1979 Arrow Ferrari Daytona, the Bridge Classic Cars restoration technicians could begin work on the dash
Bridge Classic Cars have been getting back to work on the 1979 Arrow Ferrari Daytona. The next phase involves working on the inside of the
The Bridge Classic Cars workshop here in Pettistree, Suffolk has had an incredible delivery. A set of refurbished genuine Ferrari Daytona wheels. These will be
The workshop team have been working on making progress on the 1979 Arrow Ferrari Daytona that is in our workshop.
The team began work on making the new instrument panel for the classic Daytona replica. This started as a card template which could be refined further and further until it was the perfect shape to fit behind the dash cluster. From there and using reference photos, the team could begin laying out the various dials and lights needed for the Daytona. Then, it was transferred to the aluminium sheet and carefully cut out and cleaned up before being put into the car with its dials in place.
The next job took our technicians to the engine bay of the Daytona replica, and more specifically the AC pump. The team had to create a new handmade bracket to orientate the AC bump for the belt system to work and also to allow for the unit to line up better with the other pulleys in the engine bay. Once in place, the team could then make up the crucial high-pressure lines which will hold the coolant.
The trim team at the Bridge Classic Cars restoration workshop have been busy installing the finer details of the interior of the 1979 Arrow Ferrari Daytona.
Our trimmer Briand has worked on wrapping and finishing the rear parcel shelf, which as been made entirely from scratch in order to get the perfect fit for the classic Daytona replica.
Brian has also worked on trimming the new centre console extension, roof pillar surrounds as well as making leather-wrapped sill plates from scratch for the Daytona.
The trim team at Bridge Classic Cars have been working on the interior of the 1979 Arrow Ferrari Daytona with several key jobs finished off for the car.
The team have fitted in the final carpet pieces to the cockpit of the Daytona. The trim team have hand-finished each of these pieces which includes fixing the rubber panels and installing the clips onto the pieces before being fitted into the car.
From there, the team could turn their attention to the centre console. This was trimmed in match green leather to the rest of the car. Each individual piece of the centre console has been perfectly made and trimmed by hand to make sure that it fits the console beautifully and is tailored specifically for it. Even down to perfecting and refining the handbrake lever cover.
Then, the team could begin to work on the door cards of the classic Daytona. The fibreglass cores that sit at the heart of the panels have been reworked by our body team to allow them to sit in just the right place and flush to the tops of the doors. Then the interior team could begin to fit the handmade ribbed panels and grab handles onto the doorcards. Once everything had been fit up properly onto the door cards, 3mm thick foam could be cut and formed to be fixed onto the fibreglass pieces for the car.
The trim team at the Bridge Classic Cars Suffolk HQ have been working on getting a few more jobs done on the interior of the 1979 Arrow Ferrari Daytona.
The first task was to put the new vents into the C Pillars of the classic Daytona replica. For this, our trimmer Brian very carefully marked out and cut the holes need to bit the core of the vent in place. Then, it was secured into place before a mesh was placed over the backside to perfectly match the original Daytona.
Next, Brian tackled getting the rear parcel shelf wrapped in foam. This will make up a large part of the rear of the Daytona which the team have expertly finished and put into place.
The restoration workshop have been working on some of the smaller details of the 1979 Arrow Ferrari Daytona.
This time, it was the boot lid prop/strut. Scott, one of our technicians, has carefully reworked the prop to make sure it extended and locked in place with the full weight of the decklid placed on it. Then, it was taken off and refinished to match the rest of the hardware on the classic Daytona replica.
The restoration team at the Bridge Classic Cars Suffolk HQ have made progress on the 1979 Arrow Ferrari Daytona. This time, they’ve been perfecting the fitment of the indicator lenses at the front of the classic Ferrari homage.
Our technician Scott has spent several hours getting the lenses just right for Daytona replica. The lenses had to be fixed into place on the car, which Scott made up some small and strong brackets for. These were carefully measured up and put into the car. Along with that, the back of the lens socket was masked up and painted so through the clear part of the lens, the cars stunning pale green cannot be seen.
The in-house trim team at Bridge Classic Cars have been busy hand-making several key pieces for the 1979 Arrow Ferrari Daytona.
Starting in the boot of the classic Ferrari replica. The trim shop has hand-made new boot boards for the car. These have been measured to give the best possible fit and finish to the pieces once they’re completely installed into the car. Before then, our trimmer Brian has wrapped them in black fabric to match what was originally in the boot of the car.
After this, the team test fit the centre console into the car. After the numerous modifications made to the interior of the car to create a true replica of the iconic Ferrari GT car, the fibreglass centre console cover had to be modified and the trim team created a new extension piece to perfectly replicated the fit and finish of the original car.
The restoration team at the Bridge Classic Cars Suffolk HQ have been working on making progress on several key jobs to do with the 1979 Arrow Ferrari Daytona.
After fitting the heater matrix in the classic Daytona replica our technician, Scott, hand made a new demister plenum specifically for the car. This had to be put into place for Scott to begin working on testing and measuring for the pedal box of the car.
Scott took his measurements for pedal placements and widths to modify the pedals themselves to make them exacting replicas of original Daytona pieces. While the pedals and lever themselves were being modified, Scott cleaned up the entire pedal box assembly and preparing the clutch and brake master cylinders along with the brake servo to be sent off to a local specialist to be refurbished for the project.
The in-house trim shop at Bridge Classic Cars have begun the process of creating the one-off carpet set for the 1979 Arrow Ferrari Daytona.
Our trimmer Lydia has been working on the project to create the bespoke carpets. To begin with, she took the original carpets which were removed from the car during its teardown at the start of the project and laid them back into the car to create a layout and map of which panels needed to be bound and where but also this was done to refine the sizes of each piece to create a final product as close to an original Daytona interior as possible.
Once the pieces had been laid out, they were taken upstairs to our in-house trim shop to be transferred onto the new carpet material. Finished in dark green with matching edging. The original pieces were used as templates and refined to get the best fit into the Daytona.
The largest piece was for the rear of the Arrow, these were test fit into the car to take into account the many recesses and compartments particular to Arrow Daytonas.
The 1979 Arrow Ferrari Daytona in the Bridge Classic Cars workshop has been having its doors, door cards and centre console modified to have several key authentic Ferrari Daytona pieces worked into the interior of the car.
The first part to be installed was the door lights. This involved very carefully measuring up the pieces as a template and drilling out a perfect hole to fit them.
Next, the door cards for the Daytona had to be heavily reshaped and modified to fit the new Daytona pieces. This involved the team stripping back the door card coverings for the fibreglass backing to be cut and reshaped, using minimal body filler in order to be smoothed out underneath its leather coverings.
The centre console had been reshaped and refined to more accurately replicate the original Daytona piece and match the level of detail in the interior of the 1979 Arrow Ferrari Daytona.
The workshop at Bridge Classic Cars has worked on getting the AC/Heater Unit fitted into the interior of the 1979 Arrow Ferrari Daytona.
Scott has made brackets to adapt the mounts on the AC/Heater unit to the dash structure in the Daytona. The piece was carefully test fit into the car and bolted down before the freshly retrimmed dashboard was placed over it to make sure the fit and finish were perfect on the car.
Next, he turned his attention to the handbrake on the car. The lever has been fitted with a genuine Daytona cover and then the bracketry fitted onto the transmission tunnel, painted and bolted down. Then the necessary cables could be run to the rear brakes.
The restoration workshop at Bridge Classic Cars have been working on getting several crucial pieces of the 1979 Arrow Ferrari Daytona restoration completed.
Scott has been working on carefully routing the various coolant hoses from the V12 to the new radiator set up for the car. Part of that radiator/cooling set-up involves the installation of not only a set of electric fans but also the new AC condenser. He has made up a beautiful set of custom brackets to hold these pieces to the radiator shroud.
The other pieces that have been completed on the Daytona are the installation of various key pieces to the engine such as the oil filter housing, the new exhaust bracket/mounts which has allowed Scott to begin fitting the exhaust to the V12. And with the new fans and other parts fitted to the car, he could begin working out the coolant hoses for any interference that may occur.
The fibreglass dashboard on the 1979 Arrow Ferrari Daytona is being worked on by the trim team here at the Bridge Classic Cars Suffolk HQ.
Brian has been working on cutting new ply strengthening plates for the fibreglass to make sure it is rigid and strong for not only the retrimming of the pieces but also for when the dash is installed back into the car and allow for perfect fitment in the cabin of the classic Daytona replica.
The glovebox of the 1979 Arrow Ferrari Daytona is being worked on by our restoration workshop at the Bridge Classic Cars Suffolk HQ. It’s having some modifications done to give this piece of the car the perfect fit.
Scott has been in charge of working on the fibreglass pieces of the dash to get the entire dash (and all the pieces) fitting perfectly and as close to an original Daytona as possible. Scott has had to cut and section the glovebox door to allow the pieces to have a uniform opening and close lines for that complete and flawless fit you would expect from a restored Daytona.
The Bridge Classic Cars restoration technicians have an excellent of understanding working with composites (especially Fibreglass) due to our extensive work on the Jensen 541 family of cars. So, working on the Fibreglass 1979 Arrow Ferrari Daytona means we can make sure that the fit and finish of the entire car is perfect.
With the engine bay wiring loom routed for the 1979 Arrow Ferrari Daytona, the Bridge Classic Cars restoration technicians could begin work on the dash and interior loom.
The wiring loom for the 1979 Arrow Ferrari Daytona has to be carefully laid out and routed throughout the entire car. Rob, one of our technicians, has been working on cleaning up unnecessary wiring for the car and then making sure the harness is carefully wrapped in loom tape to protect the wires from any chafing and to bundle them together for tidiness.
Rob has split the harness into each of the individual systems like it would have been done on the original Daytona and neatly put them into the wire carriers.
Bridge Classic Cars have been getting back to work on the 1979 Arrow Ferrari Daytona. The next phase involves working on the inside of the car to get it to the next stage.
Scott, one of our technicians, has been working through the list of jobs to do on the car.
He had to modify the steering column to go from the Jaguar steering rack to the Ferrari steering column while also clearing the bottom of the genuine Daytona instrument cluster. After this, he began to work on the steering boss.
The steering boss needed to be modified to fit inside of the original Daytona column shroud while also allowing the indicators to self cancel.
After all this had been done and tested, Scott worked on getting the gear stick into the same place in the cockpit as it would have been in a real Daytona.
The Bridge Classic Cars workshop here in Pettistree, Suffolk has had an incredible delivery. A set of refurbished genuine Ferrari Daytona wheels.
These will be fitted to the 1979 Arrow Ferrari Daytona which is undergoing a thorough and complete restoration by our in-house restoration teams. These wheels have been refurbished which must be done by specialists due to their magnesium construction.
This is going to be an amazing addition to the car once the restoration is complete by the team.
Bridge Classic Cars are award winning Classic Car Restoration and Maintenance specialists. Your pride and joy is in safe hands with our expert Classic Car Technicians. Take a look at our awards here.
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.