Our extremely talented in-house trimmer, Lydia, has been working on a very special project. A set of new seat covers for a Jaguar C Type.
Lydia has been making these covers from scratch in the Bridge Classic Cars in-house trim shop and used the original covers to make the best fitting replacements. Lydia has taken her time to try and match the original style of the seats and finished them in a stunning dark green leather.
This is a project we are doing for a friend of Bridge Classic Cars but it’s always amazing to see what our master trimmers do in the trim shop.
January 19, 2022 11:18 amPublished by Craig Ranson
The Bridge Classic Cars in-house restoration team have been getting together all the final touches on the 1973 Jaguar E Type Series III Roadster, Fern Grey.
One of the final pieces to finish off the rear end is the new valance cover. Our technician, Jon, spent hours getting the finish just right on the piece which is somewhat of a centre-piece for the back of the bespoke E Type.
With the valance fitted and the other brightwork in place, the rear end of Fern Grey is near enough complete.
Our in-house fabricator, Monty, is continuing his work on getting all of the affected metalwork out of the 1987 Daimler Double Six which is in with Bridge Classic Cars for restoration.
On this update, Monty has been working on a section of the passenger footwell and bottom of the gearbox tunnel. As you see from the first photo, it had become heavily pitted and corroded. So, Monty began the task of precisely removing it from the car in order to use it as a template for a series of replacement pieces he would need to make for the car.
After cutting the pieces out on the bench, Monty could then begin putting them into the car piece by piece to ensure the best fit with the most minimal amount of original material removed as possible but also ensuring it was strong and secure.
With this section of the 1987 Daimler Double Six completed, Monty can now move onto the next area of the car.
January 14, 2022 11:52 amPublished by Craig Ranson
The Bridge Classic Cars in-house trim shop has made every piece of the interior for our Jensen 541’s by hand. And the 1956 Jensen 541 we have in for restoration is the next car in that line of bespoke interiors.
Brian and Lydia have been working together to get the rear seat finished for this amazing project. In the last update, Lydia had finished making the new seat cover entirely by hand and bespoke for this particular car. Now, Brian has made the new seat base and foams for the car. Again, these are unique and bespoke for the car to ensure the best fit and finish for the final product.
The interior of this particular 1956 Jensen 541 is going to look absolutely phenomenal when it’s finished and we cannot wait to show you.
January 14, 2022 11:38 amPublished by Craig Ranson
Our in-house trim expert Lydia has been busy remaking the rear seat for the 1956 Jensen 541 that we are currently in the process of restoring at Bridge Classic Cars.
Lydia used what was left of the original rear seat as a rough guide to create a specially made template for the classic GT car. Carefully, Lydia could transfer this template onto the chosen leather to begin the process of cutting out the individual pieces that will be joined together, edged and then fitted around the seat base.
The attention to detail that our trim-shop have is what truly sets them apart in their field. Every aspect of the seat is taken into consideration when creating these custom pieces from scratch.
January 13, 2022 12:54 pmPublished by Craig Ranson
The Bridge Classic Cars in-house restoration team have been carefully stripping down the new lamps for the 1934 MG PA Midget in our workshop.
These units have been completely taken apart in preparation to be sent off to a specialist to be entirely refurbished before coming back to us and put back on the stunning pre-war sports car. Every bolt, screw and catch has been carefully removed and catalogued for this process.
We’re looking forward to seeing them when they come back and get them back on the car.
January 13, 2022 12:24 pmPublished by Craig Ranson
The brass parts of the 1905 Riley 9HP are in need of a clean and refurb. So, these are being carefully catalogued and packaged to be sent off to a specialist to come back as good as new.
These parts are over 100 years old so special care is needed with the refurbishment of them. Bridge Classic Cars works closely with a series of trusted and well-respected specialists for jobs such as this to ensure the best long-lasting results on the parts that are sent away from us here.
January 13, 2022 10:18 amPublished by Craig Ranson
The team at Bridge Classic Cars have begun work on the stunning bonnet of the 1973 Jaguar E Type Series III Roadster we have built for a client. With all of the weatherstripping installed into the headlight surrounds, they can now begin with the final brightwork.
All of the chrome for Fern Grey was sent off to a specialist, Wyatt Polishing, for refurbishment and polishing to make sure it looked as good as the rest of the incredible car. Now Paul, one of our in-house technicians, will start the meticulous task of getting the chrome back onto the headlights ready for when the bonnet is finally installed onto the car in the coming weeks.
Expect to see a lot more on the progress of the 1973 Jaguar E Type Series III Roadster here on the Bridge Classic Cars newspage.
Brian, our head trimmer here at Bridge Classic Cars, has been working his magic and skill alongside our other incredibly talented trimmer Lydia to install the new carpet set into the 1970 Porsche 911T currently in the Bridge Classic Cars in-house trim shop.
Brian carefully began working on the kick panels at the front before moving his way around the edges of the car to the rear. All of the carpet set has to be put down in a very specific order to ensure the best fit and finish for the car. Brian carefully prepared each piece and each panel to be put into the car so it was securely glued down into the cockpit of the car. Once all of the major pieces were safely in place, Brian then began work on carpeting the floor pan of the 911. Finished in black, the carpets look absolutely brilliant in this classic 911.
The Bridge Classic Cars in-house paint team have just finished working on the hubs for the 1955 Aston Martin DB2/4 Mk1.
Chris, our head painter, has delivered the freshly refinished hubs for the Aston Martin to Scott, our restoration technician, in our workshop for when final assembly calls for the hubs to be fitted up to the car.
Finished in a stunning satin black, the hubs look better than new!
January 12, 2022 12:45 pmPublished by Craig Ranson
Lydia, one of our incredible trimmers here at Bridge Classic Cars, has been busy handmaking the extra pieces for Fern Grey. Fern Grey is of course the 1973 Jaguar E Type Series III Roadster that our in-house restoration teams have been working on rebuilding from the ground up for a client of ours.
Lydia began by remaking the original tool wrap that was supplied originally with the car. It had seen better days and was not befitting of such a creation as the mighty Fern Grey. So, using the original as a template, Lydia remade the piece by hand to fit the same fit and finish as the car it will belong to.
Then, with the E Types new tonneau cover completed, Lydia began to hand make the bag which the cover folds into to be stowed away. Much like the tool wrap, Lydia has made it to the same extraordinary standards as the rest of the car.
January 12, 2022 12:20 pmPublished by Craig Ranson
Bridge Classic Cars have the honour of welcoming a 1990’s hero into our workshop in Pettistree, Suffolk. The legend that is the 1995 Dodge Viper RT/10.
This classic American supercar will go into our workshop for our restoration teams to assess and report on the car.
Keep your eye out on the Bridge Classic Cars news page for more on this incredible car.
January 12, 2022 12:02 pmPublished by Craig Ranson
Our head trimmer here at Bridge Classic Cars, Brian, has been working on finishing up the interior trims for the 1956 Jensen 541 which is in with us for a full ground-up restoration.
Brian has methodically worked through the trims around the doors of the little known sportscar to ensure that each piece is repaired (if needs be) and then prepared and recovered in the beautiful red leather chosen by the lucky owner.
Each piece of hardware has also been refinished by Brian and the trim team to give even the smallest screw or bolt the same level of finish as the pieces they secure.
Another key piece that Brian has been working on is the beautiful rear seat centre console. Brian made up a new metal piece that creates the skeleton and the recovered in soft, durable foam and capped in that deep red leather.
There will be more updates on the 1956 Jensen 541 restoration by Bridge Classic Cars very soon.
January 12, 2022 11:05 amPublished by Craig Ranson
Bridge Classic Cars have welcomed this iconic 1970 Porsche 911T into our in-house trim shop at our Pettistree, Suffolk HQ. The car, which belongs to a local customer has been brought to us for a special job.
The Bridge Classic Cars in-house trim team will be fitting a complete 911 carpet set into the cockpit of one of the most recognisable sports cars of all time. As you can see, there isn’t a lot on the inside of the car but all around the car is filled with massive amounts of character. There are so many pieces on the car that give it a personality all of its own.
Expect to see lots more on this car here on the Bridge Classic Cars news page.
January 11, 2022 11:43 amPublished by Craig Ranson
The team here at Bridge Classic Cars have been busy working on getting the 1973 MGB GT V8 that is currently in our workshop all finished up. Some of the final jobs to be completed involved renewing some of the trims.
The original chrome bumpers had seen better days, and with good quality replacement readily available the restoration teams made the decision to replace them with all new pieces. As with most classic cars, the original brackets for the new bumpers caused a slight issue. They weren’t allowing the bonnet to close completely and securely. So, our technician Paul fabricated a new set of brackets which allowed the bumpers to sit in their original position along with having the space for the bonnet to shut entirely.
Also, Paul removed the tarnished and pitted original MG BGT badge from the back of this iconic sports car so it could be replaced with a new, shiny reproduction piece we had ordered.
Our head trimmer here at Bridge Classic Cars, Brian, has been perfectly tailoring a tonneau cover to protect the interior of Fearn Grey. The 1973 Jaguar E Type Series III Roadster we have been restoring in-house.
Brian has masterfully created the new cover entirely from scratch using his wealth of knowledge and experience to produce a tight, elegant fit on the cover. Just like every piece on Fearn Grey, our restorations teams have tailored everything around the car and for the lucky owner of this stunning roadster.
There are a couple more jobs to do in our trim shop on the E Type and then it will be going into the workshop for the team to begin final assembly.
Our expert trimmer, Kath, has been hard at work creating a crucial piece for the 1934 MG PA Midget. The Bridge Classic Cars trim shop pride itself on the high standard that every single piece is finished to and the tonneau cover for the MG is no exception.
Kath made the cover entirely by hand in order for it using a handmade template in order to get the best fit for the final piece. Each of the pieces made by our trim shop is hand-finished and made using traditional techniques and materials if needed. Kath managed to completely remake to better than the original spec.
Now, it can keep all the amazing trim work underneath safe and dry for many more years to come.
The Bridge Classic Cars trim shop have been incredibly busy just before Christmas. One of the jobs that has been done was fitting the foldable soft top into Fearn Grey, the 1973 Jaguar E Type Series 3 Roadster.
Brian, our head trimmer, has been carefully pulling and stretching the new material into place and securing it to the spars on the hood to make sure that the fit and finish on the soft top is perfect with no creases or loose spots. Once it was in place, Brian could then focus on testing the mechanism worked flawlessly up and down without binding up or damaging the new soft top material in any way.
Along with the completely refurbished hard top, Fearn Grey is looking absolutely sensational! and the interior is definitely a massive part of that process.
Brian, one of our legendary in-house trim experts at Bridge Classic Cars, is a true master of his craft. Brian is currently working on the rear trim panels and pieces for the 1956 Jensen 541 being built by us here at Bridge Classic Cars. The interior is one of those pieces being handcrafted to fit the car.
The rear quarter pieces have been entirely made by hand by Brian. We have a long history of restoring Jensen 541’s to a world-class standard and part of that is the interiors our team create for these bespoke sportscars. Each piece for the interior of the ’56 has been made by hand by the team, whether it be the coverings or literally panels for the car like these rear quarter pieces.
Brian made these panels to perfectly fit into the car and also to work alongside the other pieces of trim which are going to be alongside them in the car. After hand forming them, Brian then cuts and wraps them by hand to ensure the best possible fit and finish to each piece for such a special car.
December 20, 2021 2:40 pmPublished by Craig Ranson
The Bridge Classic Cars in-house trim shop have been working the magic on the 1934 Riley 12/4 Lynx. With the rest of the car in the workshop with our restoration technicians, some of the interior pieces have been handed over to our very own Kath to do what she does best.
First across the trim table is the Tourneau cover. This piece needed a few repairs doing to it which Kath has managed to get done by combining traditional techniques with modern materials and approaches. The edges of the pieces had become heavily frayed so Kath created all new edging to surround the deep back cover. Also, several small leather pieces inside the cover had deteriorated, which Kath managed to create a template for and replace with new material.
Kath also replaced several of the tin snaps which fix the cover to the body when the soft top is folded down and stowed. So, with that completed and pressed. It was time to get it back into the car and on to the next job for this beautiful 4 door tourer.
December 20, 2021 2:14 pmPublished by Craig Ranson
Whilst the 1954 MG TF was being worked on by Jon in the Bridge Classic Cars workshop, the door cards were in our in-house trim shop being worked on by our trimmer Kath.
The door cards it was found were actually causing a slight issue with getting the door to close correctly. Kath began by inspecting the part of the door which interfered with the hinge and the striker, using her experience and skill Kath managed to rectify the issue and then re-edge and retrim the door card ready to be installed back into the car.
Whilst working on the door cards, Kath also made some new check straps for the doors. Finding the closest colour hide we had in stock, Kath remade the pieces entirely from scratch so that when the doors are opened the will not over extend and risk damaging the pins or the hinges.
December 20, 2021 12:21 pmPublished by Craig Ranson
The Bridge Classic Cars workshop here in Pettistree, Suffolk has had an incredible delivery. A set of refurbished genuine Ferrari Daytona wheels.
These will be fitted to the 1979 Arrow Ferrari Daytona which is undergoing a thorough and complete restoration by our in-house restoration teams. These wheels have been refurbished which must be done by specialists due to their magnesium construction.
This is going to be an amazing addition to the car once the restoration is complete by the team.
December 17, 2021 11:42 amPublished by Craig Ranson
Brian in the Bridge Classic Cars in-house trim shop has been continuing on his highly skilled work on the interior of Fern Grey, the 1973 Jaguar E Type Series III Roadster.
Brian has been working on test and final fitting the various small trim pieces onto the car. One of the big jobs is making sure the recently finished dash and windscreen trim to fit and flow correctly across the front of the interior of this stunning sports car. With the pieces in their final place, Brian could begin working his way towards the back of the car.
Brian also worked on the soft top where it meets the windscreen trims to ensure all of the trims for the soft top also worked alongside the various windscreen pieces. Any adjustments or refinements could be completed piece by piece to get the best fit for every different aspect of the interior.
Then, in the rear of Fern Grey, Brian began to get the new rear panels into place and make sure they perfectly fit around the hinges and mechanism for the soft top while up, but also when it is folded down into place.
As you can see, its full steam ahead on Fern Grey in the trim shop! And it is looking fantastic.
December 17, 2021 10:57 amPublished by Craig Ranson
While the seats were removed from the 1968 Jaguar MkII 2.4 which is in the Bridge Classic Cars workshop, our in-house trim expert, Brian, could begin work on retrimming the floors and installing the sound deadening into the floor of this classic Jaguar.
Previously, Brian had stripped out the floors of the car in our trim shop in preparation for the welding repairs needed. Now, Brian could begin his work getting the inside of the car looking as good as the outside. Using original style sound deadening, Brian laid the material into all of the areas that can be affected or are known for transmitting sound into the cabin. Using a series of specialist trim tools, Brian managed to neatly secure the sound deadening into the car. This, allowed Brian to carry on to the next phase of the interior in the 1968 MkII 2.4.
Next up, was getting the carpet panels in the least accessible places throughout the interior. Trimming the rear seat edges, driveshaft tunnel and seat cross members in the stunning, vibrant red which was closely matched to the original pieces. Brian also hand trimmed the gearbox tunnel as well. Using the original pieces as a template to work from but would trim and adjust the pieces to ensure the best fit and finish once all of the accompanying trim has been fitted.
December 17, 2021 8:38 amPublished by Craig Ranson
We love the 1934 MG PA Midget here at Bridge Classic Cars. Whilst work is continuing on the classic sports car in the workshop, our in-house trim expert Brian has the seat in the trim shop.
Underneath the driver’s seat, the original leather liner and edging were missing. No problem for Brian and the trim team. Brian made the new piece from high-quality black leather and then hand made the edging which surrounded the outer edge of the seat base.
Our trim shop do an amazing job. Brian’s work really finishes off the seat from the 1934 MG PA, but expect to see a lot more on this car in the coming weeks here on the Bridge Classic Cars news page.
December 16, 2021 11:54 amPublished by Craig Ranson
Jon, one of the in-house restoration experts here at Bridge Classic Cars has spent some time working to get the doors on the 1954 MG TF to fit and close properly.
Firstly, Jon removed the door card from the classic sports car where it was then given over to one of our in-house trim experts, Kath, to repair. Whilst this was being done, Jon got to work on the doors. The first thing Jon noticed was that the spot welds that attach the door skin to the frame had popped and allowed the door to not sit level. So, Jon quickly spot welded the door skin back on before beginning work on the hinges.
Jon, upon inspection, noted that the lower hinge of the door had too much movement. So, Jon made up a spacer to sit between the door and hinge allowing a much tighter fit and better alignment between the door striker and the hinge.
Whilst Kath in the trim shop had the door card, it was decided to create a new check strap for the door in as close of a match as possible to the existing leather.
While waiting for the door card and check strap, Jon began work on adjusting the strikers and hinges so the door would shut evenly and level. With some small modifications needed to one of the latches, everything was eventually right in place to line up perfectly for the little sports car.
December 15, 2021 3:12 pmPublished by Craig Ranson
There’s been a hive of activity in recent weeks around the new extension on the Bridge Classic Cars workshop in Pettistree, Suffolk.
The new ramps and edging have had their concrete laid and cured by the builders meaning we will be able to get any car into the extension regardless of its ride height and if it needs pushing, the angle isn’t too bad for our technicians!
The cladding has also been finished all the way around the building, and seamlessly blends into our existing workshop just next door. It’s our first purpose-built, from scratch building so we are very proud and excited about this project.
The other big change is that the doors have started to go into the building. Our colour-matched brown fire door is securely put into the building to the exacting building codes it must meet and the large roller doors have begun to be installed into the building this week.
It’s all coming together on the Workshop Extension and we’re very excited to show you more on the build as it progresses.
December 15, 2021 9:40 amPublished by Craig Ranson
Our in-house trim shop at Bridge Classic Cars are well versed with the interiors of the majestic Jensen 541. So, with the fronts of the 1956 Jensen 541 seats complete, it was time for Kath to turn her attention to the back of the other seat.
Using the other completed seat for reference, Kath began by carefully making a template of the back of the seat. Each of the seat buckets was made by hand back in the 1950s so they are slightly different from one to the next, so to ensure the best fit and finish Kath makes each template by hand. Once this was complete, she could begin to transfer the template onto the lining and the hide that would envelop the fibreglass seat.
After this had been carefully glued and set to the backs and bottom of the seat, Kath began to work on the seat base and cushion. Again, every single piece of the seat is handmade by our in-house trim shop so even the cushions are bespoke to this car. Millimetre by millimetre, Kath perfected the fit and shape of the foam and once that was fair and even, she attached it to the seat base. Then, in the matching hide, Kath retrimmed the cushion and seat base ready to put into the seat.
With this complete, both seats are now ready for when the rest of the car is finished and handed over to the trim shop for fitting.
December 15, 2021 8:58 amPublished by Craig Ranson
The 1934 MG PA Midget which belongs to our Director, Gordon, is in the workshop for our in-house teams to tackle the next jobs.
The first is our technicians have removed the hubs on the classic sports car so that our amazingly talented in-house paint team can get them to look as good as new for the car. This also gives our restoration technicians the chance to inspect and clean the hubs and spindles on the MG.
Another job on the list was to look into the battery of the car. Our team have been working on a way of better securing it into the car.
December 14, 2021 3:42 pmPublished by Craig Ranson
It’s been a pleasure having this 1968 Jaguar MkII 2.4 in the Bridge Classic Cars workshop. Our in-house restoration technicians have been hard at work on the car getting through the list of jobs requested by its lucky owner.
Our technician Dave has been working on getting the reworked front seats safely and securely back into this classic saloon car. Since the car has also been in our workshop where our master trimmers have been working their craft on the inside of the big Jag. Dave has been carefully working around the incredible work that has been done by Brian and Kath our trimmer so as to not damage or mark any of their work.
With the front seats being so important, Dave has been making sure that all the hardware used to secure them to the car is in the best condition and all the threaded holes are clear and clean-cut to make sure they can be tightened down accurately. So, with that, Dave will get the front seats into the car and then the team at Bridge Classic Cars can work on getting the other jobs on the 1968 MkII 2.4 done.
December 14, 2021 11:30 amPublished by Craig Ranson
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.