Brian, our head trimmer here at Bridge Classic Cars, has been working his magic and skill alongside our other incredibly talented trimmer Lydia to install the new carpet set into the 1970 Porsche 911T currently in the Bridge Classic Cars in-house trim shop.
Brian carefully began working on the kick panels at the front before moving his way around the edges of the car to the rear. All of the carpet set has to be put down in a very specific order to ensure the best fit and finish for the car. Brian carefully prepared each piece and each panel to be put into the car so it was securely glued down into the cockpit of the car. Once all of the major pieces were safely in place, Brian then began work on carpeting the floor pan of the 911. Finished in black, the carpets look absolutely brilliant in this classic 911.
Lydia, one of our incredible trimmers here at Bridge Classic Cars, has been busy handmaking the extra pieces for Fern Grey. Fern Grey is of course the 1973 Jaguar E Type Series III Roadster that our in-house restoration teams have been working on rebuilding from the ground up for a client of ours.
Lydia began by remaking the original tool wrap that was supplied originally with the car. It had seen better days and was not befitting of such a creation as the mighty Fern Grey. So, using the original as a template, Lydia remade the piece by hand to fit the same fit and finish as the car it will belong to.
Then, with the E Types new tonneau cover completed, Lydia began to hand make the bag which the cover folds into to be stowed away. Much like the tool wrap, Lydia has made it to the same extraordinary standards as the rest of the car.
January 12, 2022 12:20 pmPublished by Craig Ranson
Bridge Classic Cars have the honour of welcoming a 1990’s hero into our workshop in Pettistree, Suffolk. The legend that is the 1995 Dodge Viper RT/10.
This classic American supercar will go into our workshop for our restoration teams to assess and report on the car.
Keep your eye out on the Bridge Classic Cars news page for more on this incredible car.
January 12, 2022 12:02 pmPublished by Craig Ranson
Our head trimmer here at Bridge Classic Cars, Brian, has been working on finishing up the interior trims for the 1956 Jensen 541 which is in with us for a full ground-up restoration.
Brian has methodically worked through the trims around the doors of the little known sportscar to ensure that each piece is repaired (if needs be) and then prepared and recovered in the beautiful red leather chosen by the lucky owner.
Each piece of hardware has also been refinished by Brian and the trim team to give even the smallest screw or bolt the same level of finish as the pieces they secure.
Another key piece that Brian has been working on is the beautiful rear seat centre console. Brian made up a new metal piece that creates the skeleton and the recovered in soft, durable foam and capped in that deep red leather.
There will be more updates on the 1956 Jensen 541 restoration by Bridge Classic Cars very soon.
January 12, 2022 11:05 amPublished by Craig Ranson
Bridge Classic Cars have welcomed this iconic 1970 Porsche 911T into our in-house trim shop at our Pettistree, Suffolk HQ. The car, which belongs to a local customer has been brought to us for a special job.
The Bridge Classic Cars in-house trim team will be fitting a complete 911 carpet set into the cockpit of one of the most recognisable sports cars of all time. As you can see, there isn’t a lot on the inside of the car but all around the car is filled with massive amounts of character. There are so many pieces on the car that give it a personality all of its own.
Expect to see lots more on this car here on the Bridge Classic Cars news page.
January 11, 2022 11:43 amPublished by Craig Ranson
Our head trimmer here at Bridge Classic Cars, Brian, has been perfectly tailoring a tonneau cover to protect the interior of Fearn Grey. The 1973 Jaguar E Type Series III Roadster we have been restoring in-house.
Brian has masterfully created the new cover entirely from scratch using his wealth of knowledge and experience to produce a tight, elegant fit on the cover. Just like every piece on Fearn Grey, our restorations teams have tailored everything around the car and for the lucky owner of this stunning roadster.
There are a couple more jobs to do in our trim shop on the E Type and then it will be going into the workshop for the team to begin final assembly.
Our expert trimmer, Kath, has been hard at work creating a crucial piece for the 1934 MG PA Midget. The Bridge Classic Cars trim shop pride itself on the high standard that every single piece is finished to and the tonneau cover for the MG is no exception.
Kath made the cover entirely by hand in order for it using a handmade template in order to get the best fit for the final piece. Each of the pieces made by our trim shop is hand-finished and made using traditional techniques and materials if needed. Kath managed to completely remake to better than the original spec.
Now, it can keep all the amazing trim work underneath safe and dry for many more years to come.
The Bridge Classic Cars trim shop have been incredibly busy just before Christmas. One of the jobs that has been done was fitting the foldable soft top into Fearn Grey, the 1973 Jaguar E Type Series 3 Roadster.
Brian, our head trimmer, has been carefully pulling and stretching the new material into place and securing it to the spars on the hood to make sure that the fit and finish on the soft top is perfect with no creases or loose spots. Once it was in place, Brian could then focus on testing the mechanism worked flawlessly up and down without binding up or damaging the new soft top material in any way.
Along with the completely refurbished hard top, Fearn Grey is looking absolutely sensational! and the interior is definitely a massive part of that process.
Brian, one of our legendary in-house trim experts at Bridge Classic Cars, is a true master of his craft. Brian is currently working on the rear trim panels and pieces for the 1956 Jensen 541 being built by us here at Bridge Classic Cars. The interior is one of those pieces being handcrafted to fit the car.
The rear quarter pieces have been entirely made by hand by Brian. We have a long history of restoring Jensen 541’s to a world-class standard and part of that is the interiors our team create for these bespoke sportscars. Each piece for the interior of the ’56 has been made by hand by the team, whether it be the coverings or literally panels for the car like these rear quarter pieces.
Brian made these panels to perfectly fit into the car and also to work alongside the other pieces of trim which are going to be alongside them in the car. After hand forming them, Brian then cuts and wraps them by hand to ensure the best possible fit and finish to each piece for such a special car.
December 20, 2021 2:40 pmPublished by Craig Ranson
The Bridge Classic Cars in-house trim shop have been working the magic on the 1934 Riley 12/4 Lynx. With the rest of the car in the workshop with our restoration technicians, some of the interior pieces have been handed over to our very own Kath to do what she does best.
First across the trim table is the Tourneau cover. This piece needed a few repairs doing to it which Kath has managed to get done by combining traditional techniques with modern materials and approaches. The edges of the pieces had become heavily frayed so Kath created all new edging to surround the deep back cover. Also, several small leather pieces inside the cover had deteriorated, which Kath managed to create a template for and replace with new material.
Kath also replaced several of the tin snaps which fix the cover to the body when the soft top is folded down and stowed. So, with that completed and pressed. It was time to get it back into the car and on to the next job for this beautiful 4 door tourer.
December 20, 2021 2:14 pmPublished by Craig Ranson
Whilst the 1954 MG TF was being worked on by Jon in the Bridge Classic Cars workshop, the door cards were in our in-house trim shop being worked on by our trimmer Kath.
The door cards it was found were actually causing a slight issue with getting the door to close correctly. Kath began by inspecting the part of the door which interfered with the hinge and the striker, using her experience and skill Kath managed to rectify the issue and then re-edge and retrim the door card ready to be installed back into the car.
Whilst working on the door cards, Kath also made some new check straps for the doors. Finding the closest colour hide we had in stock, Kath remade the pieces entirely from scratch so that when the doors are opened the will not over extend and risk damaging the pins or the hinges.
December 20, 2021 12:21 pmPublished by Craig Ranson
Brian in the Bridge Classic Cars in-house trim shop has been continuing on his highly skilled work on the interior of Fern Grey, the 1973 Jaguar E Type Series III Roadster.
Brian has been working on test and final fitting the various small trim pieces onto the car. One of the big jobs is making sure the recently finished dash and windscreen trim to fit and flow correctly across the front of the interior of this stunning sports car. With the pieces in their final place, Brian could begin working his way towards the back of the car.
Brian also worked on the soft top where it meets the windscreen trims to ensure all of the trims for the soft top also worked alongside the various windscreen pieces. Any adjustments or refinements could be completed piece by piece to get the best fit for every different aspect of the interior.
Then, in the rear of Fern Grey, Brian began to get the new rear panels into place and make sure they perfectly fit around the hinges and mechanism for the soft top while up, but also when it is folded down into place.
As you can see, its full steam ahead on Fern Grey in the trim shop! And it is looking fantastic.
December 17, 2021 10:57 amPublished by Craig Ranson
While the seats were removed from the 1968 Jaguar MkII 2.4 which is in the Bridge Classic Cars workshop, our in-house trim expert, Brian, could begin work on retrimming the floors and installing the sound deadening into the floor of this classic Jaguar.
Previously, Brian had stripped out the floors of the car in our trim shop in preparation for the welding repairs needed. Now, Brian could begin his work getting the inside of the car looking as good as the outside. Using original style sound deadening, Brian laid the material into all of the areas that can be affected or are known for transmitting sound into the cabin. Using a series of specialist trim tools, Brian managed to neatly secure the sound deadening into the car. This, allowed Brian to carry on to the next phase of the interior in the 1968 MkII 2.4.
Next up, was getting the carpet panels in the least accessible places throughout the interior. Trimming the rear seat edges, driveshaft tunnel and seat cross members in the stunning, vibrant red which was closely matched to the original pieces. Brian also hand trimmed the gearbox tunnel as well. Using the original pieces as a template to work from but would trim and adjust the pieces to ensure the best fit and finish once all of the accompanying trim has been fitted.
December 17, 2021 8:38 amPublished by Craig Ranson
We love the 1934 MG PA Midget here at Bridge Classic Cars. Whilst work is continuing on the classic sports car in the workshop, our in-house trim expert Brian has the seat in the trim shop.
Underneath the driver’s seat, the original leather liner and edging were missing. No problem for Brian and the trim team. Brian made the new piece from high-quality black leather and then hand made the edging which surrounded the outer edge of the seat base.
Our trim shop do an amazing job. Brian’s work really finishes off the seat from the 1934 MG PA, but expect to see a lot more on this car in the coming weeks here on the Bridge Classic Cars news page.
December 16, 2021 11:54 amPublished by Craig Ranson
Jon, one of the in-house restoration experts here at Bridge Classic Cars has spent some time working to get the doors on the 1954 MG TF to fit and close properly.
Firstly, Jon removed the door card from the classic sports car where it was then given over to one of our in-house trim experts, Kath, to repair. Whilst this was being done, Jon got to work on the doors. The first thing Jon noticed was that the spot welds that attach the door skin to the frame had popped and allowed the door to not sit level. So, Jon quickly spot welded the door skin back on before beginning work on the hinges.
Jon, upon inspection, noted that the lower hinge of the door had too much movement. So, Jon made up a spacer to sit between the door and hinge allowing a much tighter fit and better alignment between the door striker and the hinge.
Whilst Kath in the trim shop had the door card, it was decided to create a new check strap for the door in as close of a match as possible to the existing leather.
While waiting for the door card and check strap, Jon began work on adjusting the strikers and hinges so the door would shut evenly and level. With some small modifications needed to one of the latches, everything was eventually right in place to line up perfectly for the little sports car.
December 15, 2021 3:12 pmPublished by Craig Ranson
There’s been a hive of activity in recent weeks around the new extension on the Bridge Classic Cars workshop in Pettistree, Suffolk.
The new ramps and edging have had their concrete laid and cured by the builders meaning we will be able to get any car into the extension regardless of its ride height and if it needs pushing, the angle isn’t too bad for our technicians!
The cladding has also been finished all the way around the building, and seamlessly blends into our existing workshop just next door. It’s our first purpose-built, from scratch building so we are very proud and excited about this project.
The other big change is that the doors have started to go into the building. Our colour-matched brown fire door is securely put into the building to the exacting building codes it must meet and the large roller doors have begun to be installed into the building this week.
It’s all coming together on the Workshop Extension and we’re very excited to show you more on the build as it progresses.
December 15, 2021 9:40 amPublished by Craig Ranson
Our in-house trim shop at Bridge Classic Cars are well versed with the interiors of the majestic Jensen 541. So, with the fronts of the 1956 Jensen 541 seats complete, it was time for Kath to turn her attention to the back of the other seat.
Using the other completed seat for reference, Kath began by carefully making a template of the back of the seat. Each of the seat buckets was made by hand back in the 1950s so they are slightly different from one to the next, so to ensure the best fit and finish Kath makes each template by hand. Once this was complete, she could begin to transfer the template onto the lining and the hide that would envelop the fibreglass seat.
After this had been carefully glued and set to the backs and bottom of the seat, Kath began to work on the seat base and cushion. Again, every single piece of the seat is handmade by our in-house trim shop so even the cushions are bespoke to this car. Millimetre by millimetre, Kath perfected the fit and shape of the foam and once that was fair and even, she attached it to the seat base. Then, in the matching hide, Kath retrimmed the cushion and seat base ready to put into the seat.
With this complete, both seats are now ready for when the rest of the car is finished and handed over to the trim shop for fitting.
December 15, 2021 8:58 amPublished by Craig Ranson
The 1934 MG PA Midget which belongs to our Director, Gordon, is in the workshop for our in-house teams to tackle the next jobs.
The first is our technicians have removed the hubs on the classic sports car so that our amazingly talented in-house paint team can get them to look as good as new for the car. This also gives our restoration technicians the chance to inspect and clean the hubs and spindles on the MG.
Another job on the list was to look into the battery of the car. Our team have been working on a way of better securing it into the car.
December 14, 2021 3:42 pmPublished by Craig Ranson
It’s been a pleasure having this 1968 Jaguar MkII 2.4 in the Bridge Classic Cars workshop. Our in-house restoration technicians have been hard at work on the car getting through the list of jobs requested by its lucky owner.
Our technician Dave has been working on getting the reworked front seats safely and securely back into this classic saloon car. Since the car has also been in our workshop where our master trimmers have been working their craft on the inside of the big Jag. Dave has been carefully working around the incredible work that has been done by Brian and Kath our trimmer so as to not damage or mark any of their work.
With the front seats being so important, Dave has been making sure that all the hardware used to secure them to the car is in the best condition and all the threaded holes are clear and clean-cut to make sure they can be tightened down accurately. So, with that, Dave will get the front seats into the car and then the team at Bridge Classic Cars can work on getting the other jobs on the 1968 MkII 2.4 done.
December 14, 2021 11:30 amPublished by Craig Ranson
Brian, Kath and Lydia have been working on the next phase of the interior for the 1973 Jaguar E Type Roadster that Bridge Classic Cars calls Fern Grey. Now that the windscreen has been fitted and cured, it’s time to start getting the trim, dash and hood in place.
Using the original dash panels and A-Pillar trims, Brian stripped apart the panels ready to be recovered. The original foam for these pieces was in remarkably good condition so they were refreshed and reused. The trimming in the rich black leather however is all brand new. Brian selected a hide that compliments the rest of the interior but also matches closely what would have originally been used on the E Type’s to trim the pieces with.
Each of the panels and trims was hand-cut and finished by the Bridge Classic Cars in-house trim team to ensure the best fit. Including the dash pad which now that the windscreen is safely in place could be secured to the top of the dash after test fitting multiple times.
With all of the dash and trim around the windscreen fitted, Brian and the team began to work on getting the foldable hood mechanism in place. Checking the mounting points for the front and back of the hood, Brian began the task of gently manipulating the mounts to ensure the best possible fit as well as making sure each of the spars sat level and true. Thankfully after some skilled moving, the hood sat perfectly inside the gorgeous roadster.
The windscreen of the 1973 Jaguar E Type Series III Roadster is now in the car!
This moment has been a long time coming. The curving and elegant windscreen for the E Type is like a jewel in its crown. This completely bespoke Jaguar has been cherished by the in-house restoration teams at Bridge Classic Cars throughout its build so, having one of the final aesthetic pieces complete was a true milestone.
For windscreen removal and installs, we use a local specialist called Car Glass and Trim who we have worked with for many years. Their technicians came out to install the glass into Fern Grey with the same attention to detail and care as our very own technicians. With the windscreen and its seals in place, it was time to let the adhesives cure while Kath and Brian in the trim shop carry on fitting out the E Type.
December 8, 2021 11:14 amPublished by Craig Ranson
Over the coming weeks and months, there are some changes beginning to happen at the Bridge Classic Cars workshop in Pettistree, Suffolk. Apart from our new workshop extension, the changes have already started to begin.
The trim shop, where Brian and Kath create some of the most incredible automotive upholstery you have ever seen, is now accessible from our in-house paint booth and vice versa. This allows for better movement around the building and also a better flow for the restoration teams.
There are more changes coming soon to the building but you’ll have to wait and see. Keep an eye here on the Bridge Classic Cars news page for more updates on our very special workshop.
Brian, one of our incredible in-house trim experts here at Bridge Classic Cars, has been hard at work getting the interior of the 1973 Jaguar E Type Series III Roadster.
Brian and the trim team are going full force at the interior of the E Type we know as Fern Grey in preparation for its completion. Brian began by lining and fitting the new boot liner to the Roadster.
The boot of the E Type is actually rather large. This is due to its design as being a long-distance grand tourer. Carrying 2 people in as much comfort, luxury and speed as was possible was the name of the game when it came to the E Type’s original design brief. Throughout its development, that always remained the same. Brian, finished the boot of Fern Grey in a beautiful soft camel colour to compliment the smooth green of the bodywork.
Next, Brian and the trim team got to work on the convertible hood for the E Type. This is being entirely built from scratch around Fern Grey. Using original templates, Brian has managed to recreate the padding for the top rail where it will meet the elegant, wrapping windshield of the E Type.
Whilst working on his next piece of the puzzle, Brian has wrapped the transmission tunnel in the vibrant green carpeting that is found throughout the entire car from front to back. Hand edged in leather that matches the exterior, this gives another level of sophistication and style to Fern Grey that helps to compliment all the small details.
Small details such as the cubby/armrest. Brian has worked really hard on getting the fit and finish of the armrest cubby to such a level it almost deserves a story of its own. The entire assembly was handmade by Brian to ensure the best fit and the best surface on which to wrap the green leather. Neat, precise cuts in every opening allow for a brand new feel to this and the trims to fit tight and close to the cubby.
Expect to see much more on Fern Grey in the coming weeks here on the Bridge Classic Cars news page.
Kath and the Bridge Classic Cars in-house trim team have been continuing to fit-out of the 1973 Jaguar E Type Series III Roadster that we call Fern Grey.
Kath and Brian have been working the rear of the E Type to get the rear compartment entirely trimmed and installed into the car. Below the rear hatch is also trimmed in matching green carpet with leather accents. Kath and Brian test fit each piece multiple time to ensure that each component of the rear of the interior in Fern Grey worked together and had the right fit and finish.
After the carpeting and rear bulkhead had been trimmed, it was time to install the deck-lid which Kath had built for Fern Grey. This really finishes off the rear part of the interior and completes its bespoke look in some ways. Next up, Brian and Kath will be working their way forward into the cabin of Fern Grey by trimming the tunnel and footwells with that incredible thick green carpeting.
Mauro, one of the Bridge Classic Cars in-house restoration technicians, has been stripping down the bumpers, grille and brightwork on the 1955 Aston Martin DB2/4 that is undergoing restoration at Bridge Classic Cars.
These pieces have been carefully broken down into individual components to be sent off for various treatments for them to be refinished to a standard fitting of the car. The brightwork on the Aston Martin is a key focal point to such an iconic sports car that they need to fit just right as well as look the best.
With that, Mauro has been carefully removing each bolt from the bumpers and brackets to make sure they are in good condition and if not, they are replaced. The bumpers, grille and all other parts are carefully catalogued and stored until they are ready to be sent off to local specialists that we have been working with for many years on our other world class restoration projects.
The level of detail that Bridge Classic Cars holds itself to, even in terms of the breakdown of each component, is purposely high to ensure the best final finish of our restorations.
Keep a look out here on the Bridge Classic Cars news page for more updates on the 1955 Aston Martin DB2/4 soon.
December 2, 2021 10:38 amPublished by Craig Ranson
Fern Grey, the 1973 Jaguar E Type Series III Roadster, is a very special car. Not only has the car itself been hand built from the ground up, but its entire interior has too. The Bridge Classic Cars in-house trim shop are truly world class. Brian and Kath’s team deliver handcrafted, bespoke interiors for our customers.
That is the story of the interior of Fern Grey. Kath and Brian have been working on getting more of the sound deadening into the car, while also fitting out the rear panels in preparation for the rear covering.
The sound deadening is being placed down where there will either be considerable road or driveline noise. The point of Fern Grey is to be a Grand Tourer like the E Type was always intended so part of that easy living is making sure cabin volumes is kept to a minimum where possible. The sound deadening material lays down perfectly flat after Kath and Brian make templates for each individual pieces, making sure it does not interfere with any piece of the custom made interior.
The rear panels are a work of art. Carefully covered in the signature green leather of Fern Grey are the quarter panels that overlap one another. A lot of time, care and attention has gone into these panels purely due to where and how they fit into the car. Kath must have test fit these panels 20 times before the final installation of them.
Next up for Fern Grey, Kath and Brian will be beginning to lay the custom carpet pieces into the bottom of this incredible one of E Type.
The 1973 Jaguar E Type Series III Roadster which we know as Fern Grey has officially been moved over to the the trim shop! A massive milestone in the build, which means now Brian, Kath and Lydia can began work on getting the handmade interior into this stunning E Type.
To begin with, Brian started to mark out and prepare the sound deadening panels for the car. This will be a crucial part of the interior as not only will it help with the final fit and finish of each of the handmade pieces, but will also be key for a pleasant driving experience for its owner. So, Brian used his years of experience and reference photos to place the sound deadening panels in just the right place which should mean all the piece go into the car perfectly but it has less intrusive cabin noise.
With the sound deadening now secured into the car, Brian could turn his attention to the doors. Brian and the Bridge Classic Cars in-house trim team have custom made these absolutely stunning green door cards to match the rest of the interior accent colours. These are two piece door panels with an upper cap and a lower door card but were created specifically for this car. The door cards needed to be secured into place for Brian to do the last piece for passenger side doors. The all important sill cap.
The sill cap for Fern Grey is much like the rest of the car, entirely bespoke to the project. Wanting to continue to the elegance and comfort all the way from the centre of the car out, Brian wrapped the sills in upholstery foam to give them a totally new look and feel. Like they had become an extension of the dash/seats/consoles. Then, wrapped in a colour matched vinyl the sills look absolutely sensational and there’s still so much more to come!
Expect to see quite a few more updates in the coming weeks on Fern Grey here on the Bridge Classic Cars news page.
Brian and Lydia, part of our incredible in-house Bridge Classic Cars trim team, have been working on covering and fixing down the battery box cover for the 1934 MG PA.
Brian and Lydia used the previous cover, to begin with, and have retrimmed it in a matching woven carpet. The piece itself was present with the car but Brian worked his magic to make it blend in seamlessly with the rest of the car. Whilst working on the back of the car, Lydia began work sizing up the new Tourneau cover for this classic early MG.
Keep an eye out here on the Bridge Classic Cars blog for more updates on the sensational 1934 MG PA.
November 29, 2021 10:24 amPublished by Craig Ranson
Brian, our in-house trim expert, has been continuing to work on the rear quarter trims for the 1956 Jensen 541 currently in at Bridge Classic Cars for restoration.
Brian has completely fabricated each of the trim pieces by hand for the 541 using what was left of the originals. Piece by piece, Brian used the original techniques to recreate the trim panels which will then go on to be retrimmed in matching vibrant red leather to the rest of the car.
Each of the pieces has been hand cut and sanded to be a perfect fit when installed into the car. Millimetre by millimetre, Brian removed material after dry fitting. Also, taking into account the foam covering and leather to ensure the best fit and finish possible for this incredible 1950s British sports car.
November 29, 2021 10:20 amPublished by Craig Ranson
Brian has been busy at work hand-crafting several pieces for the interior of the 1956 Jensen 541 that is being restored by Bridge Classic Cars.
Brian, one of our master in-house trim experts, has been using what is salvageable from the original interior as well as reference photos and experience to create the needed trim panels. Here, Brian is making new wooden pieces for interior cards of the 541 which will be foamed and then wrapped in the world-class hide to the customers choice of colour.
Brian took his time to carefully measure and template the pieces that are needed for the car. Then, he began to bring them to life for this stunning British sports car which is currently being restored by all of our restoration teams.
November 26, 2021 11:53 amPublished by Craig Ranson
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
