News

C – Type Refit

Jonn has been refitting our 2022 Bridge C-Type Replica. He tried to fit the front suspension brace but the brackets were too small. He polished

Read More ยป

Flash Sale

Our 2007 Land Rover Defender 110 is now live on the Bridge Classic Cars Competitions website. What makes this even more exciting is that, until

Read More ยป

More Painting

Mauro has been working on our 1976 Triumph Spitfire in the Bridge Classic Cars paintshop. He has painted the seat frames in DTM satin black

Read More ยป

Zephyr Repairs

Jonn has been completing some repairs on our 1964 Ford Zephyr 4. Here is what he said: Clean block around drive core plug. Looks OK.

Read More ยป

Competition Prep

Before our 2007 Land Rover Defender 110 goes live on Bridge Classic Cars Competitions tomorrow, technician Neil has been giving it a checkover.

Read More ยป

Door Card

Lydia made an internal door card for the opening door on our 1905 Riley 9HP. She first made a template from paper to ensure the

Read More ยป

C-Type Door Card

Lydia has recently been making a pretend ‘door card ‘ to balance out the interior of our 2022 Bridge C-Type Replica. There is only one

Read More ยป

Chassis Rebuilding

Recently, we have started to refit the suspension and steering, and some brake components that have either been new parts or refurbished original parts that

Read More ยป

An E-Type Arrives

Tony recently collected our 1969 Jaguar E-Type Roadster. When it arrived, James carried out a service/appraisal. He put the battery on charge and carried out

Read More ยป

Our S-Type Is Back

After recently coming into the Bridge Classic Cars workshop for an appraisal, our 1966 Jaguar S-Type returned to us for work to begin on it.

Tony collected this beautiful classic and delivered it safely to the workshop. Once it was here, Neil gave it a full service, changed the antifreeze, and adjusted the wheel bearings.

From there, John took over and began looking into the smell of petrol in the boot. The O/S tank vent looked incorrect. John dropped the fuel tank to gain access to the filler neck. He then checked that the vent was clear and fitted a new vent pipe.

A new oil filter and air filter were fitted and all points were greased.

C – Type Refit

Jonn has been refitting our 2022 Bridge C-Type Replica. He tried to fit the front suspension brace but the brackets were too small.

He polished and fitted the fuel cap before polishing the mirror bracket too. The windscreen was fitted and the ends were sanded down the ends to fit and polished both ends back to smooth.

Jonn then fitted the screen and drilled out the fixings.

Jonn used bigger brackets and fitted these to the front suspension and secured them. He then fitted the brace bar but this still requires spacers. The remaining windscreen screws were fitted and tightened.

Our MG BGT V8 has found a new home

Now heading off to it’s new home, our 1975 MG B GT V8 has come out of storage, had a general check over and is now in the hands of it’s new owner.

Talking Classics With Alex Alloro

Alex Alloro is the Lead Connectivity Engineer at Lotus Cars as well as a racing driver. We recently sat down with Alex to discuss his life and all things automotive.

This is how our conversation went:

You describe yourself as a petrol head, where did this love come from?

There must have been some glitch when my DNA sequence was created. Itโ€™s not something that was transmitted by my parents, but it has always been there, that undescriptive excitement for motor vehicles.

It must have come from when my mum used to take me to this park, where they had the coolest electric bikes and mini-F1 cars, with the classic livery such as the iconic red and white. I guess it must have also come from there.

Youโ€™re obviously heavily involved in the automotive industry with your job at Lotus. Could you tell us about your role?

I am responsible for overseeing the infotainment and connectivity systems on the Emira project. It is an incredibly exciting role as I am involved in every stage of the project, from design to production. My primary responsibility is to ensure that our systems meet customer and program demands while also adhering to legal regulations. This involves collaborating with various aspects of vehicle engineering, with designers, manufacturing, engineering, quality control and more.

As the system owner, it is essential for me to ensure that my colleagues have access to the most up-to-date information related to our system.


Lotus are moving towards more electric vehicles, do you believe this is the future of the automotive industry?

It is legally the future of the automotive industry, at least in Europe as we know with the petrol ban comes into force from 2035. Manufacturers must adapt to these regulations and massively invest in these technologies if they want a chance to survive in a competitive environment.

Do I believe in it? Yes, I think EVs have their share in the market, they are convenient, innovative and can be fun to drive. However, I do not believe in it as a unique solution, it is for me an irrational decision on many levels. I hope that other alternatives, such as synthetic fuels will prove to be a good enough alternative to face the current environmental challenges and also give us more choices.ย 


Why did you choose Lotus as a brand to work for? What do you enjoy the most?

Lotus has undoubtedly impacted the automotive and motorsport world with its innovations and successes. The brand emphasis on innovation and driving experience is what made me choose Lotus Sports Cars as a company to work for.

It is a great feeling to have the chance to work on suchย engaging products, inspired by a great legacy.ย  People around there are passionate which makes it a very motivating environment.ย 

The most thrilling aspect of my role is undoubtedly testing and validating the systems, especially at the vehicle level, witnessing the project come to life.

Could you tell us a little more about your racing and where this interest was sparked?

I think those little cars in the park are where it all started, and then came my time with racing video games which I loved. Itโ€™s always been a dream to become a racing driver but I always heard it could not be achieved if you are not starting go-karting at a young age, and I want to prove them wrong.

I started competitive go-karting in 2020 when I was 25 years old and have now worked my way up to race car in 2023. I currently race an MK Indy Cup200, which is a Lotus Seven inspired car powered by an Hayabusa engine. The Cup 200 is a very exciting multi-class championship, racing along with other prototypes, which makes it very competitive.

What is your greatest racing achievement and what is your next goal?

My greatest achievement at this time is making it to the grid with a car I entirely built myself in less than 3 months. ย 

Although I was disappointed with my first results, ย someone reminded me that โ€˜โ€™To finish first. You must first finish โ€˜โ€™. It definitely was not an easy journey and making it to the track was the proof I never gave up on that grid. My next goal now is to reach the podium in 2024!

You have one tank of petrol left and can never drive againโ€ฆ what are you driving and where are you going?

Very difficult question, but it will probably be a Ferrari F40, driving between my home town on the French Riviera to the top of the Alps.

Enjoyed Talking Classics With Alex Alloro?

Take a look at the entire Talking Classics series for more interviews with other influential people.

Sold in 6 days

Received a call from Luke at LRH Cars this morning to tell me he has sold his freshly listed Fiat 500, just 6 days after listing. He’s a very happy man and I’m sure he will soon have a very happy customer, if not already!

Great work, great result.

If you have a car for sale, list for free on MyClassics

Taking our Riley 9hp to Joby Carter

In February our Riley 9hp underwent the next stage of its restoration by paying a visit to Joby Carter’s workshop in Berkshire.

Joby Carter is a traditional sign writer who is an expert in fairground style art. Up until 2022 his work could be seen decorating every ride as part of his touring steam fair. He has documented many of his creations alongside tips and ideas in a series of books.

In accordance with vehicles of a similar age, Carter was commissioned by Bridge Classic Cars to paint our Riley 9hp with a neat design. The pristine line work edges the shapes and contours of the car, outlining the doors. The sleek likes create an elegant and opulent aesthetic.

ยฃ1bn was a lot of money in those days – Gerald Ratner

โ€˜So we ended up owing the bank ยฃ1bnโ€ฆ

โ€™ยฃ1bn was a lot of money in those daysโ€™

One of the many beautifully timed, quick-witted quotes from Gerald Ratner this morning. He had the entire room fixated, hooked on hearing the fascinating story of the moment his infamous 1991 speech very quickly crushed his entire fortune. A real and true insight but so hilariously told.

A huge thank you to Josh Yasar and the whole team at Pound Gates for organising a brilliant breakfast networking event. Both myself and Gordon had a brilliant time and could relate to so many of the fascinating stories that Gerald told…fortunately for us, not the infamous one!

Lovely to meet so many new contacts and to see some familiar faces too. A fantastic turn out and an event you should be very proud of.

Check out the high lights on YouTube

Fazza196 believes our Jubilee is the last!

Our 1988 Vauxhall Jubilee has had some great interest in eBay this week and with only 23hrs to go the car has bids which therefore means it should be finding a new home soon.

We’ve had a great message from Fazza196 on eBay which I felt I needed to share. We often talk about the fact that every car has a story to tell and as our description says; we believe this to be the last Jubilee edition in existence but can’t be sure.

Fazza196 says: “Just so youโ€™re aware, this is 100% the last remaining Jubilee, I banger raced the 2nd last one in November last year”

So there we go, another report suggesting that this could be the last Jubilee and if you’re quick, it could be yours.

A New Addition – 1966 Jaguar S-Type Arrives at our HQ

This stunning 1966 Jaguar S-Type has arrived at the Bridge Classic Cars HQ for the team to take a look at a few issues with the car for its owner.

After having its assessment by the team late last year, the team will begin ticking the tasks off of the job sheet for this absolute beautiful example of a Jaguar saloon.

Flash Sale

Our 2007 Land Rover Defender 110 is now live on the Bridge Classic Cars Competitions website.

What makes this even more exciting is that, until 5pm tomorrow (Wednesday 6th March), you can enter the draw for just ยฃ5.00

The 24 hour flash sale has begun…

More Painting

Mauro has been working on our 1976 Triumph Spitfire in the Bridge Classic Cars paintshop.

He has painted the seat frames in DTM satin black as well as painting the rocker cover and air filter box in DTM silver.

Prep And Polyfan

Chris has had our 1963 Bentley S3 in the Bridge Classic Cars paint shop. He has been rubbing down the polyfan in preparation for more to go on.

Once this was done, Chris then applied more polyfan to make sure everything was nice and straight.

Defenders don’t always have to be industrial looking

My Land Rover Defender is one of the best vehicles I have ever owned…at least that’s what I think right now.

Yes it’s industrial, yes it’s loud and bumpy but it’s great fun!

Having owned the car for a little while now I do my very best to keep on top of the general wear and tear that the Defender gets. I’ve sealed and treated the underside, I’ve corrected some paint imperfections, tidied a couple of areas in the rear compartment to make it more family friendly and less ‘workhorse’ and then recently I noticed that the centre hubs were starting to show signs of surface rust.

Not too big a job to fix and a huge difference to the overall kerb appeal. Great work from Mauro today, cleaning up the hubs and coating in a fresh layer of black DTM.

Zephyr Repairs

Jonn has been completing some repairs on our 1964 Ford Zephyr 4. Here is what he said:

Clean block around drive core plug. Looks OK. Leave and recheck in a bit. Upon rechecking there were signs of a small weep. Drain engine block and radiator. Flush rad with water. Clean block and fit new core plug with wellhead applied. Clean block drain tap and refit with PTFE tape.

SS100 Lights And Signals

The indicators weren’t working correctly on our 1939 Jaguar SS100. They were stripped and checked and diagnosed as needing a new flasher control unit. This was fitted and all the lights were tested fully, then the interior trims and carpets were refitted and checked.

Painting A Spitfire

Our 1979 Triumph Spitfire 1500 has recently been painted in the Bridge Classic Cars Paint shop.

Austin Devon Gear Box

Mauro has been prepping the gearbox of our 1951 Austin Devon Pickup for dtm black paint.

Front Wing And Servo

John has made the mesh to go on our 1959 Jensen 541R front wings, as requested by the owner of the car.

While John was doing that, James replaced the brake servo as, on a recent test drive, it was noted that the brakes were not quite as good as they could be. A replacement unit was fitted and the brakes were bled.

A Recent Photoshoot with our 1975 MGB GT V8

A cornerstone of the British sports car world. A car recognised and loved by so many for its usability, practicality, and itโ€™s gorgeous looks. We are proud to offer for sale our 1975 MGB GT V8.

The most sought after of the MGB GTโ€™s. Its elegant, sophisticated looks paired with the glorious rumble of the small block V8 are a recipe for a thrilling driving experience.

Our 1975 example is one of the 2591 V8 cars produced by MG between 1973 and 1976 and is one of the very best MGBโ€™s weโ€™ve had through our workshop. Finished in vibrant Maroon Red with Black accents, it is a classic and classy colour combination. The Rover sourced small-block V8 delivers 137BHP which was more than enough to get this small, nimble, and iconic sports car on the move quickly.

Interestingly, the V8 used in the MGB GT was the lightest V8 engine available at the time, so the V8 took 20 kilograms off the nose of these wonderful British cars compared to the 4-cylinder engine.

This car has a well-documented history with invoices from parts specialists as well as extensive MOT histories dating back to the early 1990s. The file also includes photos from its bare metal rebuild in the early 2010s with photographs of its journey for its next owner to pour over.

This car also features a fold back sunroof for those warm summers days where you can roll back the top and go out for a blast to enjoy that intoxicating V8 rumble and the playful dynamics of the MGโ€™s handling.

One look at its famous slender grille and you canโ€™t miss that glorious badge staring straight back at you with the simple โ€œV8โ€. The car also features the multi-piece wheels which were a signature of the V8โ€™s and special editions that came out during the cars production run.

This car was recently sold through our good friends over at Car & Classic.

Door Card

Lydia made an internal door card for the opening door on our 1905 Riley 9HP.

She first made a template from paper to ensure the correct shape, and then she cut this out from card. She then made her own design based on the pinstriping on the paintwork of the vehicle. She will affix this door card to the door when she has finished staining the wood, and the door handle has been altered and fixed on.

C-Type Door Card

Lydia has recently been making a pretend ‘door card ‘ to balance out the interior of our 2022 Bridge C-Type Replica. There is only one door, with a very small area that Lydia has made a covering for, so she had to work out something that would look good on the other side too. She first made a template from paper and checked this for size. She then used this to make the card shape and cut it out from leather. Then she marked the diamond pattern to mirror the other side and sewed this. The door card was finished with a piping edge to give it a nice finish.

Chassis Rebuilding

Recently, we have started to refit the suspension and steering, and some brake components that have either been new parts or refurbished original parts that we have overhauled to our 1953 Aston Martin DB2/4.

Things Are Happening

The near side lower corner of our 1960 Jensen 541R has been repaired by Alan. He also replaced both quarter-panel window rubber holders.

Once all the repairs on the underside of the body were complete, Alan masked out the parts that need sealing when they are attached to the body frame. He then blacked the whole underside of the body.

While this was happening, Christian fabricated a boot latch bracket.

A Modern Take On A 1920s Speakeasy

In Bury St Edmunds, a unique bar experience has been created – The Secret Distillery. Situated at 3 Short Brackland, this is not your ordinary bar, but is a throwback to the past, recreating the atmosphere of a 1920s speakeasy, a time when such establishments operated in the shadows of Prohibition America.

A Nod To The Prohibition Era

During the 1920s in the United States, the sale of alcohol was outlawed, giving rise to the speakeasy, where drinks were discreetly sold. The term ‘speakeasy’ relates to the suggestion that patrons speak “easy” or quietly about these illicit bars. The Secret Distillery captures this feel, offering a space that feels both exclusive and full of history.

The Secret Distillery

Opened on a quiet Saturday evening, The Secret Distillery is the brainchild of Ryan Luke and Tom Mills and is the second bar launched by the Bacton-based gin distillery, Heart of Suffolk.

Since its creation in 2018, the distillery has created three award-winning London dry gins – Betty’s, Rosie’s, and Ivy’s. Their collection also includes limited edition liqueurs, adding a unique twist to their spirit selection.

The original Heart of Suffolk Distillery was in Finbowโ€™s Yard, Stowmarket but has now expanded to include a shop, an events space, and a production unit. The new speakeasy-style bar is located at the site of the former St Distillery bar.


A Taste of Suffolk

Emphasising local flavours, The Secret Distillery offers a range of drinks from nearby producers, including Humber Doucy Brewing Company, Ampersand, Suffolk Village Ciders, Herbarium, Scobbyโ€™s, and Vino Gusto. This commitment to local sourcing not only supports the surrounding community but also provides patrons with a taste of Suffolk’s finest.

A Venue for All Occasions

The Secret Distillery is open Thursday and Friday evenings, Saturday 12 pm to 11 pm and Sunday 12 pm- 6 pm. It’s not just about the drinks though; the venue also houses a shop where you can purchase Heart of Suffolk spirits.

Bridge Classic Cars

We stock a range of gin from the Heart of Suffolk Distillery here at Bridge Classic Cars. In fact, it wasn’t too long ago that we welcomed them to our fully licensed bar to have a look around.

Bentley – Inspection and Repairs

Jon has now completed the inspection on our 1993 Bentley Turbo R. He’s carried out the necessary repairs which included; sorting the connections on the nearside headlight and main beam. He’s stripped the nearside door panel and repositioned the electric window switch.

The car has been taken off the ramp and a road test has been carried out.

It returned to the workshop with a belt squeal and steering is out to the right.

We have tightened the alternator belt.

The steering has been adjust and we’ve inflate all tyres to the correct pressure.

Fuel has been added and now the car is ready for the draw!

A New Competition Car

We have recently welcomed another car into the Bridge Classic Cars workshop. This time it is our 1964 Ford Zephyr 4, which will soon go live on the Bridge Classic Cars Competitions website.

Jonn has been looking at our new arrival and here are his notes:

Top up gearbox and axle oils. Strip brakes and inspect. Remove offside front calliper.

Thoroughly degrease calliper and clean all components. Remove piston from calliper and found it badly pitted and unserviceable. Check rear brakes to find cylinders weeping, shoes contaminated and hub seals weeping. Order parts….. refit wheels and drums until parts arrive. Remove fuel tank sender. Strip and lubricate and free off. Refit and test, ok. Tidy wiring under bonnet.

Remove air filter and fixed throttle linkage. Cut small pieces of wood to use as battery security. Make small strap from alloy to hold down battery and cover in sticky back foam. Drill out inner wing and bolt up strap. Clean out washer bottle and top up and test. Adjust washer aim. Test dynamo charging. Remove dynamo and regulator to send for repair. Remove exhaust completely and take to Fab shop for repair. Suck out old fluid from both master cylinder reservoirs and top up with new.

An E-Type Arrives

Tony recently collected our 1969 Jaguar E-Type Roadster.

When it arrived, James carried out a service/appraisal. He put the battery on charge and carried out a full inspection of the car. All the brakes and tyres were checked, including the pressure of the spare. The brakes were all good so James removed the carpet and inspected the plug to check the gear oil. This was ok, as was the rear diff oil.

James noticed slight oil leaks from the engine, high up and the rocker covers are showing signs of weeping. He checked all of the lights, washers, wipers, and signals. The horn was not working.

There was a small drop of oil on the rear diff and gearbox. The spare tyre was flat but the tyre and wheel rim were new with no visible puncture.

James went on to grease the rear suspension and drive shafts. The offside rear outer suspension arm was cracked slightly and the grease nipple was loose. The exhaust front pipe was slightly damaged on the lower edge which James thinks could be due to height.

The oil and filter were drained/replaced along with the air filter and spark plugs. Then James investigated the horn not working. The relay that controls the horn was checked, and the horns worked when powered separately. The earth from the steering wheel switch was checked as ok, but there was a live feed missing from the relay. This was traced back to the fuse box, there was no continuity through the fuse despite it looking to be in good condition. A replacement fuse was fitted, and the horns worked, the old fuse was found to be broken internally despite its external appearance.

He then moved on to the oil leak. Both rocker covers were removed, along with the camshaft end plates (these can leak too). All residue of excess sealant was removed from the old seals and mating areas, and then the correct sealant was added to the cylinder heads and rocker covers. New gaskets were fitted, the the covers were installed with new copper sealing washers and tightened. The oil residue was cleaned from the engine, and then new oil was added and the car was run up to recheck for leaks from the rocker covers area and new oil filter.

All maintenance points were greased and levels checked and topped up, tyres checked for pressure and depth, and lights and wiper operation confirmed ahead of an MOT test. The battery was charged but appears low still, so replacement is recommended. Visual inspection of brake and suspension components was all ok.

A busy week of deliveries

Tony’s had a busy week on the road this week. As I sit here writing this he is currently heading up the A65 on his way to the north of Scotland for the weekend to collect 5 (potentially 6) classic motorcycles.

But earlier in the week he delivered the incredible 1992 Rover Mini Italian Job to one very happy Brian. Brian has been waiting patiently for the winning car as we discovered a slight vibration during the Pre Delivery Inspection and we did not want him to have the car until we had resolved the issue.

James accepted delivery of his 1982 Bedford HA van. Although James resides some distance from us here in Suffolk he has a vehicle storage facility close to our door so the journey we were expecting to have ended up a few hundred miles shorter. James is an avid collector of classic cars and we are lead to believe this win is the 16th classic he has in his collection. Enjoy the car James.

But the Alfa Romeo, recently won by double winner Lee is staying with us in our Hangar for a little while as Lee prepares his home for the new arrival. Lee would rather not see his Alfa sitting on the driveway whilst his building works continues so has instantly opted to have the vehicle dry stored with us and we expect to rearrange the delivery for early May.

Inspection And Repairs – E-Type

Classic car technician has been taking a look at our beautiful 1968 Jaguar E-Type Series 1.5

While working on the car he refitted the nearside front bumper trim and swapped the spare wheel with the offside rear and knocked it up tight. He then cleaned and reglued the boot seal.

Jonn also tightened the nearside rear front shock absorber top bolt before checking all fluid levels (these were fine).

He went on to fit new exhaust nuts to the downpipe flange. After adjusting the washer jets, Jonn fitted O rings to the bonnet rear grille and secured them.

The road test of our E-Type went very well and Jonn was happy with the result.