Pete began work on our 1989 Daimler Double Six by starting the engine and checking the coolant level, which was then topped up. With the engine running, the vehicle was raised on the ramp and brought up to operating temperature to inspect for any signs of coolant leaks. None were identified during this process. The […]
Jonn has started to fit new ignition parts to our 1969 Daimler 250 V8. He removed the spark plugs, cleaned and regap for contact breaker ignition type. He also fitted new spark plug extensions.
Technician Jonn has been hard at work on our 1954 Daimler Conquest Roadster preparing it to soon go live on Bridge Classic Cars Competitions. Here are his notes from his recent work: While drivers seat out, take chance to fit new battery. Remove old battery from behind drivers seat. Fit new battery and secure and […]
Jon is working through some of the tasks required on the recommissioning of our 1954 Daimler Conquest. First things first, he has completed the assessment on the ramp and took the car out on a road test drive. We have compiled a list of parts required so now we begin to work on the tasks […]
The fabrication team at the Bridge Classic Cars Suffolk HQ have been busy working on repairing the inner and outer wheel arch on the 1986 Daimler DS420. The team have uncovered areas of heavy corrosion in the lower parts of the classic Daimler. These are being systematically cut out of the car and replaced with […]
Our in-house fabricator, Monty, is continuing his work on getting all of the affected metalwork out of the 1987 Daimler Double Six which is in with Bridge Classic Cars for restoration. On this update, Monty has been working on a section of the passenger footwell and bottom of the gearbox tunnel. As you see from […]
It’s been a little while since the last update on the 1987 Daimler Double Six currently in with us at Bridge Classic Cars. Since the last time, this Daimler has had all its brightwork and trim removed for our in-house restoration team to assess anybody repairs that need to be made to preserve this classic […]
There is a simple beauty to old Daimler V8’s. This 1964 Daimler 2.5 V8 in at Bridge Classic Cars does have a bit of an issue though. There is a leak from the gearbox, but that’s nothing our amazing technicians John and Paul can’t fix. After John and Paul had confirmed there was indeed a […]
James has been continuing his repair work on the corroded areas of the 1977 Daimler Double Six. The right-hand side front inner wing has been more work than the left-hand side. Keep up the good work James!
After thinking the 1977 Daimler Double Six would only be in and out rather quickly, James has unfortunately discovered layers of more corrosion than expected on the right-hand side, front inner wing and chassis rail/leg. The whole inside of the subframe is corroded. So James has been going through it all and working out which […]
James has been continuing his repair work on the 1986 Daimler Double Six. He’s now finished the left-hand side, which you can read about the process of here. The same work will be carried out on the right-hand side now.
James has got the 1986 Daimler Double Six in the fabrication bay and has been starting the welding work on it! He’s been concentrating on the inner wing and bonnet hinge housing area today. He found there were spot welds that had been previously been put in and weren’t holding anything in place, so he’s […]
Here we have a new arrival to the workshop, a 1977 Daimler Double-Six. It’s only in for a small amount of work, which is that both front inner wings need to be repaired and painted and there’s a sheered bolt that needs removing from its trailing arm. Stay tuned for the progress!