Scott, one of our classic car technicians has been tinkering with several more intricate parts of both the 1957 and 1960 Jensens. “I stripped down and modified the windscreen wiper mechanism,” Scott tells us, “re-greased it, put it back together then fitted it back onto the car.”
Scott also stripped down the motor for the wipers, then cleaned the grease out, prepped and repainted it, repacked the grease then re-fitted it to the car.
Scott has also made and fitted new number plate surrounds for both Jensens. “I had to fabricate a tiny joiner or ‘mount’ as it were, for the top.”
Scott has also modified the boot lid handle as it didn’t fit. Along with sorting out the bonnet guides and rest plates and fitted the glass for the 1/4 windows and fitted them to the car too. Scott also refurbished the courtesy lights too.
“I then made a boot-prop,” Scott described. “I’ve fitted that, along with the boot catch and striker plate, then adjusted the boot so it would close.” He also then fitted the return spring to the throttle pedal.
All these little additions contribute toward what will be two fantastic cars, both looking and working. Super work Scott!
Our 1960 Jensen needed a new number plate bracket, the trouble was, none that fitted were in existence.
Therefore, our creative and very talented classic car specialist technician Paul manufactured a custom built bracket to take it’s place.
Using aluminium, he cut and bent the metal into the correct shape and fitted it seamlessly into position. You’d never tell it hadn’t started it’s life there.
Restoration work continues on the black 1960 Jensen 541R. This week the brakes have been given some special attention by our classic car expert technician Paul.
“I’ve refurbished the handbrake caliper,” explains Paul, “then fitted the repaired unit back into place.”
Next stop – the trim shop.
September 4, 2020 12:25 pmPublished by Craig Ranson
The 1957 and 1960 Jensen 541R’s were treated to custom made bonnet supports last week. Along with this, they had their recently restored wings and sills re-fitted.
“Both cars have had their sills and wings completely restored, including a fresh paint job.” Our talented technician Paul explains. “I’ve fitted the restored parts back onto the car and built and fitted their new bonnet supports too, to keep the bonnet steady”.
Both Jensen’s are really starting to return to their former glory now, it’s great progress from the Bridge team.
September 1, 2020 2:00 pmPublished by Craig Ranson
Work continues on the full nut and bolt restoration of the 1960’s Jensen 541R.
Replacement air filters were fitted by expert technician Paul last week. “The original inlet manifold and carburettor didn’t fit” he described. “I’ve replaced them, so she should now have more torque and perform better”.
Paul also replaced the top coolant hose and the bottom hose, both needed cutting to the correct size.
She should sound even sweeter now – good work Paul!
September 1, 2020 1:07 pmPublished by Craig Ranson
The clutch on the 1960 Jensen 541R hasn’t been working properly. So, our expert technician Dave has built his very own easy-bleed component to get it back up and running.
“You can buy these parts online.” Dave explains, “but I’ve made my own so I can do the work sooner and not wait for parts to arrive”. A great example of the proactive attitude our team have here at Bridge – awesome job Dave!
September 1, 2020 10:44 amPublished by Craig Ranson
Both the 1957 Jensen 541R and the 1961 Jensen 541S have been treated to fully repaired bonnet grilles this week, courtesy of our expert technician Dave.
“These aluminium hooks can be flimsy and snap off”, Dave explains, snapping one of them off with ease. “So, I’ve custom built stronger ones to replace them”. Dave then welded the new hooks onto each grille to keep them snug and secure in the centre of the bonnet.
One of many finishing touches that will contribute to the final look of the Jensen’s iconic bonnet.
Brian has been making some superb progress on lots of smaller jobs on our Jensen interior restoration. He firstly stripped down the scuttle air vent covers ready to retrim.
Brian has also stripped down and recovered the main Jensen dash panel. He has re-trimmed this in black vinyl. This black vinyl is extremely tactile, providing a luxurious, understated finish that will offset the chrome work superbly.
Brian has restored the original glovebox, re-trimming the glovebox with new carpet.
Brian has also made one pair of rear door capping from 9mm ply wood. He chiselled the correct cutouts and shaped the wood to perfectly match the original. Great work, Brian!
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
