Brian is a true master of his trade. What started as a series of rotten wooden pieces became brand new pieces for the 1956 Jensen 541 that is in at Bridge Classic Cars.
Using what was left of the original pieces, Brian began to strip back and assess each piece to see if it could be salvaged and reused in the car to preserve any form of originality. Inch by inch Brian has recreated the pieces for the rear quarter trims from almost thin air. Using ply for the wooden pieces underneath, Brian began to wrap and prepare the pieces for the leather trimming.
November 25, 2021 12:23 pmPublished by Craig Ranson
This is not an MG TD. In fact, it’s quite an early MG PA. This particular car belongs to one of our directors, Gordon, who has decided there are few jobs he would like doing on his new pride and joy.
The first stop will be into our in-house trim shop for a few bits and pieces that need sorting out and then it will be into the main workshop where our in-house restoration technicians will work on this wonderful 87-year-old Sports car.
Keep your eye out here on the Bridge Classic Cars blog for more updates on the MG PA.
November 25, 2021 11:32 amPublished by Craig Ranson
Brian has been continuing to work on the interior of the 1956 Jensen 541 that is here at Bridge Classic Cars for restoration.
This time, Brian has been skillfully making the new rear seat by hand. To ensure the best fit, our in-house trim shop finds it best to do these by hand in order to get the best possible finish for the car.
Starting from a single solid block of foam, Brian transferred the template and began to cut it down to size. Slowly refining the shape until it was as close to perfect as possible and then going that last little bit to get it 100% spot on. Brian then began fitting in the braces and extra padding that is needed once the cover has been made and fitted to fit properly.
November 24, 2021 1:50 pmPublished by Craig Ranson
The interior of the 1968 Jaguar MkII 2.4 is the next item on the list of jobs to complete for its very lucky owner. With this, it’s been down to our in-house trim expert Brian to carefully dismantle and evaluate the intricate interior of the MkII.
Removing both the front seats, Brian could begin to carefully pull up and remove the front carpet from the car. This is being done as part of the replacement with a brand new matching set of carpets we have got for the car. Also during this process, Brian removed several leather-wrapped panels and the centre console that will need Brian’s expert eye and skill cast over them.
With the centre console and seats out of the car, Brian also needed to remove the rear air vents for the next phase.
With the front carpets removed from the car and safely stored away in case they are needed. Brian could turn his attention to stripping down the rear seats and floors ready for the refit. For that, Brian also had to strip the leather from the original rear seat bases to prepare for the new kit.
With everything stripped, Brian could then put the new matching set into the car. And, they look absolutely incredible!
November 24, 2021 9:40 amPublished by Craig Ranson
It’s the small details on a restoration that we believe take it to a world-class finish. Interiors are a huge part of the experience of these cars for their very lucky owners as it’s the best seat in the house in our opinion. That’s why our in-house trim shop takes everything to the next level in terms of fit and finish.
Brian, one of our in-house trim experts here at Bridge Classic Cars, has been hard at work stripping down and recovering several of the larger components for the 1956 Jensen 541. Brian began by stripping back the original dash and ceiling pads ready for them to be recovered in matching red leather to the rest of the interior. Carefully, Brian worked his magic on revealing the original piece that lay under the weathered coverings for assessment.
The pieces themselves were in remarkable shape. So, very little was needed before they were prepared for their new look. Inch by inch, Brian began with the underlays for each piece making sure they were cut perfectly to size before being married to the piece. Then, using the best hide, Brian began the process that would make them complete.
Using his years of experience in high-end retrimming, Brian stretch and secured the leather to the piece making sure at each point that the coverings sat flat and straight onto the original 1950s pieces. As you can see, the results are sensational just like the rest of the interior on this wonderful early car.
November 23, 2021 8:23 amPublished by Craig Ranson
This 1968 Jaguar MkII 2.4 is in with Bridge Classic Cars for our amazing in-house restoration teams to have a look and some work for its owner.
First is a trip to the trim shop where Brian has been working on fixing the drivers armrest. Brian carefully removed the door card from the car to take it into our trim shop and begin working on fixing the issues.
Brian got to work on carefully and methodically removing the old coverings, making sure not to cut or tear any of the original material so as to use it as a template for the new piece. Once the inner piece of the armrest was cleaned up and prepared, Brian could then begin making the new covering for the armrest itself.
Using the original piece for reference, Brian went through our leather stock to find the closest material in terms of colour and grain to the original. Once the hide had been selected then Brian could begin to transfer the templates and cover the armrest bolster with all new foam topping.
Finally, installed back onto the car it looks phenomenal.
November 19, 2021 9:21 amPublished by Craig Ranson
Kath, one of our absolutely incredible trim team, has been working on the seat of the 1956 Jensen 541 that is at Bridge Classic Cars to be restored for an amazing customer of ours.
Last time you saw Kath finishing the back of the fibreglass bucket seat. Now, it’s time for the final piece of the puzzle. The seat base. Much like the bolsters and the back, the base has been entirely handmade for the individual seat. This way Kath can ensure that it has a perfect fit and sits beautifully in the seat as a whole.
Kath hand formed the foam padding to match each and every curve of the seat. Once she was happy with the shape, it was a case of beginning to make the cover. Finished in matching deep red leather with red piping. It looks absolutely phenomenal. Each piece of the seat base was test fit to the seat itself at every stage to make sure the final fit and finish were perfect.
And as you can see by the final result, it looks absolutely stunning.
November 18, 2021 3:49 pmPublished by Craig Ranson
Whilst Fern Grey, the 1973 Jaguar E Type Series III Roadster, is being mechanically finished in our workshop. The interior is being worked on by our amazing in-house trim experts over in the trim shop.
Brian has been fitting brand new seals to the removable hardtop that has been completely retrimmed and repainted to match the car. These seals are vital to keeping the water out of this stunning roadster when the hardtop is on the car. All new seals have been carefully fixed into the necessary channels to ensure a good tight fit between the body and the hardtop by Brian.
Whilst the trim shop was working on the interior for Fern Grey, Brian also began to repair the centre console before it is retrimmed to match the car. A large crack in the material was found and repaired by the team, making sure to smooth out the surface perfectly so that when it is trimmed in its leather covering, you won’t ever know it is there.
November 18, 2021 9:38 amPublished by Craig Ranson
Brian and the Bridge Classic Cars in-house trim experts have been working on getting the new bucket seats to sit properly in the 1970 Dodge Charger that is in with us for interior fitting.
When the seats were fixed into the cabin they sat slightly at an angle. The seats are supposed to sit square in the car, which means some modifications were needed to be done to the seat rails. Thankfully, this is no problem for our incredible trim team.
Brian worked on reshaping and reforming the seat rails to fit perfectly into the car and allowed both seats to sit flat, square and evenly in the cockpit of this incredible muscle car.
November 18, 2021 9:25 amPublished by Craig Ranson
Kath, one of our amazing in-house trim experts, has been working on the seats for the 1956 Jensen 541 that is currently in with Bridge Classic Cars for a full restoration.
Last we saw Kath working her skill on the front of the seats, creating new padding and covers for the fibreglass buckets. Now, Kath is applying the same level of attention and detail to the back of the seats. Methodically, Kath has used traditional techniques to carefully remake the seatbacks in matching red leather.
The base of the seat has also been lined in preparation for the base padding which is currently being worked on by the Bridge Classic Cars in-house trim team.
November 17, 2021 4:41 pmPublished by Craig Ranson
It’s the special details on the Bridge Classic Cars restoration projects that make them bespoke to each of the owners. Take for example this storage cubby made by our incredible in-house trim team for the 1973 Jaguar E Type Series III Roadster. It was completely built and upholstered by our in-house expert Brian to match the rest of the car.
Starting from scratch, Brian created the wooden shell for the storage box that is designed to specifically fit around the car without getting in the way of its owner while out enjoying their amazing Fern Grey roadster. Then after Brian had test fit the piece into the interior, he had the job of trimming this bespoke piece to match the rest of the interior.
Every single piece on the storage box is covered in the deep green leather that flows throughout this iconic sportscar.
It looks absolutely incredible and is a perfect piece to add a little bit extra to the driving experience.
November 17, 2021 12:31 pmPublished by Craig Ranson
Tamas and Paul have been hard at work putting the 1998 Honda Integra Type R back together after its recent bodywork here at Bridge Classic Cars.
The car is being put together in our workshop piece by piece to factory specification as part of its aesthetic overhaul. This wonderful example of 1990s Japanese engineering has been with us for some time and has grown in the hearts of many who have worked on it.
During it’s final assembly, every component and system will be thoroughly checked over to ensure everything on this DC2 Integra works exactly as it should.
November 15, 2021 1:55 pmPublished by Craig Ranson
Brian has been working on the dashboard on the 1973 Jaguar E Type Series III Roadster in preparation for the rest of the car being finished off in the workshop over the next few weeks.
Brian, one of our master in-house trim experts, has worked his magic on the dashboard of Fern Grey. Once the original covering had been carefully removed, Brian could then begin to prepare the surface for it’s new cover.
Fern Grey is a special car. Everything on the entire car (not just the interior) has been worked on by our in-house restoration teams. Brian completely recovered the dash in a new black leather piece. But, it’s not just the cover that Brian worked on. The Trim team also refurbished all the trim pieces, especially the air vents on the leading edge of the dash.
Carefully, Brian cut the new cover to accept the dash vents. Then, began to fit them up onto the panel. It looks absolutely sensational.
November 15, 2021 10:39 amPublished by Craig Ranson
Brian, one of our incredible in-house trim experts at Bridge Classic Cars, has been hard at work rebuilding and refitting the seats of the 1977 MGB Roadster that is currently in at Bridge Classic Cars for restoration.
The seat bases were checked and new rails fitted, to begin with. Then, it was time to begin the process of the new webbing and padding that allows for comfort and support whilst out enjoying these brilliant little sportscars. With the new padding in place, Brian could attach it to the seatbacks and the squab bases. Making sure that the foams for each part were uniform and smooth. Then, slowly and carefully the trim team stretches the dark blue coverings over each of the seats to finish them off.
Once the backs and the bases were bolted together, Brian could then start fitting the handles to the interior mechanisms so the seats would recline and move just live brand new. Then, the finishing touch. The stunning black headrests that complete these wonderfully retrimmed seats.
November 11, 2021 8:50 amPublished by Craig Ranson
Brian is working on the inside of the 1970 Dodge Charger that is in the Bridge Classic Cars in-house trim shop.
Brian has been building up the seats ready to be fitted into the car, both front and rear. Brian built up the rear seats to get into the car to begin with so that each of the other pieces can be put into place. The rear bench seat splits into two pieces so the careful placement of the covers and fixings to make sure all of the patterns lay straight and true to each other.
Then it was time for the front seats. All the side trims for the front seats needed to be fitted in preparation for them to be fitted into the Chargers cabin. All of these pieces were carefully fitted by Brian as to not mark or scuff any of the plastic trims. Then, once all finished and present they were put into the interior of this amazing Muscle Car.
November 10, 2021 3:48 pmPublished by Craig Ranson
From our last post, you saw our in-house restoration technician Scott busy at work in the workshop at Bridge Classic Cars plumbing and wiring the freshly built 5 litre V12 that sits at the heart of this gorgeous E Type Roadster. While that has been going on in the workshop, one crucial piece has been in the trim shop under the talented eye of our expert trimmer Brian.
The hardtop. An important part of any Roadster has been carefully painted by our amazing in-house paint shop in glorious deep black. Then, it was time for Brian to work his magic. Slowly and methodically, Brian began to remove the old headlining to reveal the shell underneath. Some of the material was saved in order to create the templates for the new pieces that would be needed to completely restore the hardtop to a standard matching the car itself.
Brian worked through the hardtop piece by piece to ensure the best and finish possible on such a bespoke project as Fern Grey. Even taking care to form the new openings for the speakers that sit in the pillar behind the drivers and passengers headrests. Once the underlay had been put in and secured, Brian then got to work with the finish touches.
Using swatches of existing black material, Brian took the time to find not only a close colour match but also a complimenting texture to work with the hardtop shell but also the other interior pieces that are in dark green leather. It’s these details that truly make this build, one of a kind.
November 10, 2021 8:40 amPublished by Craig Ranson
Brian, one of our in-house trim experts at Bridge Classic Cars, has been hard at work fabricating a new glovebox for the 1970 Dodge Charger.
Firstly, Brian created a mockup to use as a template and check the fitment of the piece within the dash itself. Making sure to note down all of the mounts and holes needed to secure it into place.
Then he transferred that onto felt covered hardback to make and bend the shapes needed for the glovebox. Once that was completed, it was riveted together and installed into its final position.
This, is the small but crucial touches our trim-shop are the best at.
Refinishing or recovering a steering wheel is no simple task. The right balance of tactile feel, smoothness, finish and contrast is something that only comes with skills, understanding and complete knowledge of your craft. And that, is why our in-house trim experts at Bridge Classic Cars are the best.
The original wooden wheel on the 1970 Dodge Charger currently in at Bridge Classic Cars for an interior refit had seen better days. It was discoloured, the original varnish has begun to flake away. This just wouldn’t have matched the incredible black and orange theme chosen by the customer. So, Kath recovered the wheel using that colour palette to create a stunning piece for the car.
Kath chose her materials to closely match the existing materials used throughout the iconic muscle car and tie it into the custom interior. Deep black leather with vibrant orange stitching.
Kath measured out the black leather and cut it to size. Allowing a snug but not overly stretched fitment to the wooden wheel underneath. Then, after being hemmed, Kath began to stitch in the piece to envelop the large wooden steering wheel. Something like this, being so intricate and restricted, can only be done by hand and this is where the skill of a true craftsperson shines. The final fit and delicate stitchwork just fit the car, with its custom one-off feel.
November 9, 2021 12:00 pmPublished by Craig Ranson
We have an incredible in-house trim team here at Bridge Classic Cars. They’ve been hard at work on the interior of the 1970 Dodge Charger that is currently in our trim shop.
Here, you can see the work Kath has done refinishing the centre console to match the exterior of the Bright Orange Mopar. Kath carefully removed the original veneers from the piece in order to create templates for the new Orange vinyl that adorns the giant centrepiece of the interior in a wonderful contrast against the rest of the black vinyl.
After cutting out the templates, Kath began to wrap the original pieces after test fitting. Once all in place, Kath cleaned up all of the accompanying brightwork to make the Orange stand out even more. Then, once all the adhesive had correctly cured and settled into place. Kath, test fit the new centre console with the seats just placed in the car.
I think we can all agree, it looks absolutely sensational.
November 9, 2021 10:47 amPublished by Craig Ranson
Brian, our in-house trim master, has been busy working on retrimming and refitting trim pieces for the 1970 Dodge Charger that is in at Bridge Classic Cars.
To start with, Brian began working on retrimming the seatbacks for the plush, thick black leather bucket seats. Brian created the coverings by hand trying to get the closest he possibly could to the same thickness and quality leather used on the fronts to create one uniform piece.
Along with that, Brian also worked on recovering the seat adjusters in matching black leather for the final finishing touch of the seats.
After that, Brian then turned his attention onto the dash. This along with the seats are the next step for installation into the car. The dash pad and A-pillars were hand wrapped in matching leather to create another uniform look throughout the whole car, just another little touch on this amazing Charger
October 29, 2021 11:37 amPublished by Craig Ranson
Kath and the in-house trim team at Bridge Classic Cars have been busy working on the interior of the 1970 Dodge Charger.
Last time Kath rebound the carpet edges after they required some trimming to ensure the best fit and finish for this iconic muscle car to look absolutely perfect. Now, those front carpets are firmly in place in the car awaiting all the other interior trim to be fit over the top of them.
Kath began to look at the centre console as the next step for the interior of the Charger. It’s a rather large piece so it’s very noticeable if it isn’t looking its best. So, Kath began to carefully dismantle the centre console in preparation for its retrim. Even the wooden veneer had to be slowly and methodically removed inch by inch to preserve it to be refurbished.
All of the panels have been removed from the centre console one by one to be evaluated and a plan worked out for each of them. Polishing the brightwork, making templates for new cutouts and then, the entire console itself was retrimmed in matching black leather.
It looks sensational. This will be the next item going back into the car once the seats (which Brian has been working on alongside Kath) are finished and ready to go in.
There’s been some big progress on the 1970 Dodge Charger currently in the trim shop at Bridge Classic Cars.
Kath had to cut the carpet to get a good fit during the test fit of the piece but rather than leave it, she has bound the edge to match the original edging fitted to the carpet set. Now with the piece ready to be fitted, it was time to get the final bits of sound deadening in place.
Carefully the trim shop put the new sound deadening material into place using reference photos to get them into the same placement as the original.
Once the sound deadening was firmly in place, Kath then began the process of laying the carpet panel into its place and securing it. Using high-spec carpeting adhesive, the carpet was laid into the Charger’s front footwell and firmly in place.
Next will be getting the trims, consoles and seats ready to go into this iconic American Muscle Car.
Kath and the in-house trim team have been busy working on the insides of the 1970 Dodge Charger that’s in here at Bridge Classic Cars.
Kath has been working on getting the rear panels ready and into the car. The weatherstrip has been riveted to the bottom of the window opening along with the chrome strips that make up the ribbing for the panel.
Before that, Kath and the team had tested fitted the carpet and found that in place it didn’t sit quite right. In places, the carpet was actually too long. Not a problem for the Bridge Classic Cars trim-shop! Kath simply cut the carpet and then re-edged it to fit the car perfectly (more on that in the next post)
This meant that the carpet now sat where and exactly how it should in the iconic muscle car, taking extra care and attention to make sure any brackets or holes needed for trim work were neatly and discreetly cut.
Next time, we’ll take you behind the scenes of how Kath cut and rebound the carpet for the Charger!
After Kath had mocked up the rear seats into the Charger, it was time to start getting the carpets into the car.
However, underneath the carpet is where to most important bit of the interior is. The sound deadening. It’s crucial in making long journeys more enjoyable just due to its job of cutting down the cabin noise.
Kath carefully laid out the material across the floors of the car to make sure each piece was just in the right place to give the best result. All of this needed to be done before fitting up the carpets, which will be happening next!
October 25, 2021 11:33 amPublished by Craig Ranson
The in-house trim experts at Bridge Classic Cars have been hard at work. Teaming up to conquer the interior of the 1970 Dodge Charger.
One of the jobs on the list for the interior refit was to fit the signature dome light. This involved a small hole in the brand new headliner for the wires to be passed through. Thankfully with the skill of our trim fitters, you would never know it was ever there and the outings all lined up to be able to secure the light to the roof.
Next up, Brian began to work on getting the new rearview mirrors to the doors of the Charger. These mirrors are so iconic to the Charger that their placement is crucial. Brian, one of our in house trim experts, carefully measured up and mocked up the mirrors countless times before drilling the holes for the fixings to pass through. Once in place, the mechanisms to control the mirrors can be installed to make them fully functional.
Peony Red, the 1960 Jensen 541S, is reaching the end of its restoration and its pre-delivery inspection. So it’s time to get the last few finishing touches completed and in the car.
One of these systems that is being finished by our in-house trim experts is the sound system. Peony Red has got a modern stereo unit, although it is a classic-looking head unit it is thoroughly up to date. With that, it does require a set of new speakers.
Kath has been working on making new speaker boxes from scratch for the car. These were made from a simple wooden box but finished in matching carpet to the rest of the interior to blend into the car and be completely useable for her new owner.
Just because it’s a classic car, doesn’t mean you can’t have some of the modern luxuries. We think its a good balance of old and new in this stunning 1960 Jensen 541S
October 22, 2021 11:36 amPublished by Craig Ranson
Bridge Classic Cars will soon be welcoming a new car into our in-house trim shop. Soon, this bright yellow big block 1966 Ford Thunderbird will be coming in to have its dash pad assessed by our trim team.
As you can see, its seen better days. But, our trimmer can work wonders.
Keep an eye on the news page to see more on this amazing American icon.
October 21, 2021 11:54 amPublished by Craig Ranson
Our incredibly talented trim-shop experts have been hard at work on the 1970 Dodge Charger currently in at Bridge Classic Cars.
Next on the list of pieces that need to be done in order is the rear parcel shelf. For this, Kath had to make it from scratch. Creating a tight-fitting template, it was then cut from ply and covered to match the rest of the interior.
Kath even repainted the original fixings to make sure all originality could be kept and create a uniform look to the car.
After it was wrapped in matching material, the trim team fit it into the car and it looks absolutely amazing in the back of this wonderful muscle car.
October 21, 2021 10:29 amPublished by Craig Ranson
Kath has been working on test fitting the carpet on the 1970 Dodge Charger in the trim shop of Bridge Classic Cars.
To check the best fit on the carpet, she has had to mock up the rear seat in place. It looks incredible! The carpet does need to be stretched and skillfully manipulated into its final place but the results so far are looking amazing.
More very soon on the 1970 Dodge Charger here at Bridge Classic Cars.
Our 1966 Sunbeam Alpine is freshly back from its time at the 78th Goodwood Members Meeting last weekend and it’s now time to have its tonneau cover fitted.
The Bridge Classic Cars in-house trim experts worked hard to get the new cover fitted and sitting just right on the back of this bright blue ’60s sportscar. Brian worked on getting the hardware fitted into the body of the car in just the right place to tightly pull the black cover in each way to make sure it flowed and sat well on the car.
Our in-house trim team can work wonders with just about any material they are given for a job. This, is a perfect example of the time, care and dedication given to a job by Brian, Kath and Lydia.
On Thursday (October 21st) the car will be part of a live draw over on our Facebook page where we will find out who the next lucky owner of this wonderful little sports car will be.
Tickets are still available! Just click the link below to head over to the Bridge Classic Cars Competitions website.
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
