We recently completed the full restoration of our 1976 Triumph Spitfire. Its very happy owner came all the way from his home in France to collect this beautiful classic and to take it for its first drive….back to France! As first drives go, that’s a big one but our Spitfire and its owner made it […]
The wheel caps of our 1976 Triumph Spitfire have been prepped ready to be painted very soon.
Our 1976 Triumph Spitfire has made lots of progress recently. The wiper motor has been stripped, rebuilt and fitted. The dash bridge panel was stripped, recovered and refitted. The centre armrest was also stripped, repainted, recovered and fitted. The seats were recovered too. Seat belts have been installed along with the centre armrest and trims […]
Mauro has been working on our 1976 Triumph Spitfire in the Bridge Classic Cars paintshop. He has painted the seat frames in DTM satin black as well as painting the rocker cover and air filter box in DTM silver.
The piece of carpet for the rear shelf that was supplied with the kit for our 1976 Triumph Spitfire was incorrectly finished and didn’t fit. It required a complete remake to make it sit in the vehicle as it should. Lydia cut out the new piece of carpet and shaped it in the vehicle, before […]
Rob has continued with the rebuild of our 1976 Triumph Spitfire. The headlamp bezels have been fitted and the bonnet has now been fitted to the car too. The door seals and B post capping finishers were fitted and the hood frame was bolted on. Rob cleaned the hood frame catches and fitted them.
The engine has been the centre of attention for Mauro and Rob lately. Mauro painted some of the engine components in black satin dtm while Rob unmasked the engine block and thoroughly cleaned it. The crankshaft and rear seal plate were fitted and the steering column was built up with new bushes, switches and reconditioned […]
Alan has been adding colour to the wheel arches of our 1976 Triumph Spitfire after it had raptor applied. As well as the arches, the last few small components were painted too along with the headlight bowls and bonnet corners. Alan then flatted and polished both sides of the bonnet. Technician Rob has also been […]
The reassembly of our 1976 Triumph Spitfire is making good progress. Rob has now fitted the rear seat pan sound deadening aswell as fitting new trim in the rear of the cockpit area. While Rob was doing this, Alan was prepping the doors and bonnet for colour. He then applied colour and lacquer.
Our 1976 Triumph Spitfire has made a lot of progress recently. After having its body painted in Java Green, it left the Bridge Classic Cars paintshop and went back to Rob in the main workshop. Rob has now begun the process of reassembling the car. After reassembling the rear brakes with new and reconditioned parts, […]
Bridge Classic Cars paint technician Alan has been working on our 1976 Triumph Spitfire. He prepped the polyester primer ready for high-build primer before applying the high-build primer to the doors and boot lid. Alan then masked and primed the body of the car.
Rob has welded the inner wheel arches back onto the bonnet of our 1976 Triumph Spitfire. He did this before the outside of the bonnet was painted. More parts are being cleaned and blasted before Rob electroplated them.
Our 1976 Triumph Spitfire has continued to make good progress at the hands of technician Rob. Rob has built up both front spring/shock absorber assemblies and fitted them to the car. He also fitted the poly bushes to the rear trailing arms. He then went on to fit the poly bushes to the differential rear […]
Classic car technician Rob has built up the left-hand front disc/hub with new bearings and fitted it to our 1976 Triumph Spitfire. He has also fitted the steering rack before he built up both rear driveshafts. The rear spring bushes were changed for poly ones and the spring mounting box was assembled.
Classic car technician Rob has been refitting the front suspension to our 1976 Triumph Spitfire. Rob has also cleaned, sandblasted, and replated all of the parts for the steering and suspension that were initially plated. These are now ready for reassembly.
Our 1976 Triumph Spitfire has been in the Bridge Classic Cars paint shop with technician Alan. Alan has been applying polyester primer to the doors, boot lid, and bonnet. The first stage of this was to reapply epoxy primer to give them corrosion protection. Then all of the parts were sprayed with polyester primer.
Our 1976 Triumph Spitfire bulkhead has been modified by classic car technician Rob, to ensure the bonnet gaps are correct. Rob then finalised the door gaps before repairing the anti-roll bar brackets on the chassis. The boot lid was repaired and trial fitted before the front wheel arches were removed from the bonnet to allow […]
More progress has been made on our 1976 Triumph Spitfire. Classic car technician Rob fitted the left-hand rear wing and modified the rear wing door gap to give the correct clearance. The right-hand door gaps were achieved by cutting away the edges, rewelding and then grinding to get even shut lines. The front quarter valances […]
Classic car technician Rob has continued his work on the restoration of our 1976 Triumph Spitfire. He has been repairing corrosion in various parts of the vehicle. After focussing on the rear seat pan area, Rob strengthened the bulkhead in the spots where Spitfires have a habit of cracking. He did this by welding in […]
Our 1976 Triumph Spitfire has made some great progress in its restoration journey lately. The American spec chassis extensions have been removed and the lower chassis rails have been repaired. The rear of the chassis has been converted to European spec and various chassis brackets are in the process of being straightened. New chassis outriggers […]
Classic car technician Rob has been stripping parts from our 1976 Triumph Spitfire 1500. This is in preparation for them to be sandblasted before being painted or sand-coated. Once the chassis and parts return from the sandblasters, the next phase of the restoration process can begin.
Classic car technician Rob has been continuing his work on our 1976 Triumph Spitfire. He has been stripping down the chassis ready for it to be sandblasted. The underseal was scraped off the underbody to ensure the best results possible are achieved during sandblasting. The doors of our Spitfire were also stripped down and the […]
The restoration of our 1976 Triumph Spitfire 1500 has begun. This is another exciting project for us as it is for a returning customer who currently lives in France. It is for this reason that the left-hand drive configuration will stay with the vehicle. We have already restored three classic cars in our customer’s garage, […]