The sunroof, headliner and window trim from the 1987 Daimler Double Six are in the Bridge Classic Cars trim shop to be recovered in matching
The fabrication team in the Bridge Classic Cars restoration workshop at our Suffolk HQ are hard at work repairing the rust issues in the sunroof
Several pieces from the interior of the 1987 Daimler Double Six have been transferred to the in-house trim shop at Bridge Classic Cars. The trim
The doors from the 1987 Daimler Double Six have been moved from the body shop to the paint shop at Bridge Classic Cars. The doors
After the repairs to the boot floor of the 1987 Daimler Double Six – The Bridge Classic Cars teams have been working to make sure
The Bridge Classic Cars fabrication shop have been working their way through the rust repairs on the 1987 Daimler Double Six. Monty has been cutting
The paint and body team at Bridge Classic Cars have been busy stripping down some of the finished panels from the 1989 Daimler Double Six
The fabrication shop at Bridge Classic Cars have begun work on the rear passenger side of the 1987 Daimler Double Six to fix any of
The Bridge Classic Cars fabrication department have been working their way towards the rear of the 1987 Daimler Double Six and ultimately towards the end
The Bridge Classic Cars fabrication team have been working on getting any and all signs of corrosion out of the 1987 Daimler Double Six currently
The in-house Bridge Classic Cars fabrication team have been working on the rust repairs to the 1987 Daimler Double Six. Monty, one of our amazingly
The arches of the 1987 Daimler Double Six are in need of some TLC. So, with the car in the hands of our in-house fabrication
The Bridge Classic Cars in-house fabrication team have been continuing work on the rust repairs to the frame of the 1987 Daimler Double Six currently
The Bridge Classic Cars in-house fabrication team have been hard at work sorting out some of the rust issues on the 1987 Daimler Double Six.
Our in-house fabricator, Monty, is continuing his work on getting all of the affected metalwork out of the 1987 Daimler Double Six which is in
Our in-house fabrication shop at Bridge Classic Cars has been working its way through the rust issues on the 1987 Daimler Double Six. Monty, one
Monty, one of our incredible in-house bodywork experts here at Bridge Classic Cars, has begun the process of repairing any rust on the 1987 Daimler
It’s been a little while since the last update on the 1987 Daimler Double Six currently in with us at Bridge Classic Cars. Since the
Classic cars all have the little foibles. This has become more apparent with this 1987 Daimler Double Six we have with us at Bridge Classic
The sunroof, headliner and window trim from the 1987 Daimler Double Six are in the Bridge Classic Cars trim shop to be recovered in matching beige material.
Brian has been working on getting each individual piece cut out and perfectly retrimmed after being carefully stripped back and prepared for this stage. Each individual piece has been hand-worked to give the best fit and finish for the classic Daimler.
The fabrication team in the Bridge Classic Cars restoration workshop at our Suffolk HQ are hard at work repairing the rust issues in the sunroof of the 1987 Daimler Double Six.
Monty has been working his way methodically through the entirety of the classic Daimler. This time he has turned his attention to the sunroof and sunroof opening of the car, which is showing some noticeable signs of corrosion both on the interior and exterior of the car. Firstly, the sunroof panel was removed and stripped back to best assess the piece.
With everything cleaned back, the level of corrosion could be seen and assessed. Monty began handmaking the various patch panels and pieces needed for both the roof panel and the sunroof rails. With all of these pieces carefully templated and made, the process of welding them into the car could begin.
Because of the tolerances in the sunroof mechanism, the welding process has to be precise and accurate as to not warp any of the pieces with the heat generated by welding.
Several pieces from the interior of the 1987 Daimler Double Six have been transferred to the in-house trim shop at Bridge Classic Cars.
The trim team have been carefully deconstructing and stripping back the various pieces of trim and panels from the roof of the classic Daimler. The sunroof of the car was removed in order to be inspected and assessed before it will be retrimmed by the team.
Next, the headliner of the car was stripped back and the foam sanded to be readied for the new headliner for the car fitted very soon.
Finally, the trim team carefully took apart the rear window trim and after cleaning up the surface retrimmed it in brand new foam strips.
The doors from the 1987 Daimler Double Six have been moved from the body shop to the paint shop at Bridge Classic Cars.
The doors have been prepared for their first coat of primer before being taken back through into the body shop to be perfected and shaped in anticipation for the body shell to be moved into the department from the fabrication shop and readied for primer.
After the repairs to the boot floor of the 1987 Daimler Double Six – The Bridge Classic Cars teams have been working to make sure everything is sealed up tight.
The body team at Bridge Classic Cars have been underneath the and in the boot of the classic Daimler to seal any joints between the panels which make up the boot floor. This is crucial for the longevity of not just our repairs on the car but the longevity of the whole car itself.
The Bridge Classic Cars fabrication shop have been working their way through the rust repairs on the 1987 Daimler Double Six.
Monty has been cutting out the corroded metal in the boot floor of the classic Daimler. Using the pieces cut out of the boot, he created new pieces for the car which were then test fitted to check before being welded in. The hand-made floor patch also had the strengthening beads rolled into the material to follow the original channels in the existing floor to create one complete uniform piece once painted.
A small patch panel also needed to be made for an area of corrosion behind the fuel tank. Like the others, the area was cut out and rust treated before the new piece was welded in.
The paint and body team at Bridge Classic Cars have been busy stripping down some of the finished panels from the 1989 Daimler Double Six ahead of its respray.
The team has been carefully stripping back the deep blue paintwork on the panels back to bare metal to be assessed for any bodywork that may be required to get them looking absolutely perfect before they go into the booth for their first coats of primer.
The fabrication shop at Bridge Classic Cars have begun work on the rear passenger side of the 1987 Daimler Double Six to fix any of the rust issues in this area.
Our fabricators have replaced several areas around the wheel arches and sill which had entirely rusted through. Monty, our fabricator, has hand made new patch panels for these areas to make sure that everything in that area is solid and rust-free.
The fabrication team have also had to make a new wheel arch edge for the classic Daimler. This had unfortunately been affected by rust and spread into the bottom of the rear door. Each of these pieces were then cut out, prepared and new pieces welded in to remove any trace of corrosion.
With the new metal in the rear quarters of both sides, Monty can keep moving rearwards on the Double Six to get the body completely rust-free before it goes into the Bridge Classic Cars paint shop.
The Bridge Classic Cars fabrication department have been working their way towards the rear of the 1987 Daimler Double Six and ultimately towards the end of the fabrication work needed on this classic Daimler.
Monty, one of our fabricators, has been carefully working on cutting out the rear sill and rear arch to perform the necessary repairs. Each of the pieces has been made by hand to ensure the best fit and finish on the patch panels. Monty has only removed the affected areas to retain as much of the original metal as possible that is still in good shape. This included a section of the rear door which had rusted out, along with the leading edge of the arch/door jam.
Inch by inch, he welded the new pieces onto the bottom edges of the car until finally the job was completed. All of the pieces were formed and pushed/pulled to the best possible fit so when it is moved to our body shop, there will be as minimal filler work as possible before the car’s respray.
The Bridge Classic Cars fabrication team have been working on getting any and all signs of corrosion out of the 1987 Daimler Double Six currently in our Suffolk HQ workshop for restoration.
Monty, one of our fabricators, has been methodically going through the car to address any issues with a series of smaller sympathetic repairs where needed. One of these areas is the wings of the car and the bottoms of the doors.
He has gone through each panel to determine just how much material needs to be removed in order for it to be structurally sound and safe. Monty has made a series of patch panels for both the wings and the doors of the Daimler from scratch. Handforming each of the pieces until it was a tight fit and flowed with any curves or radiuses on the car.
With this step done, he will carry on through the car getting all the necessary areas completely sorted out.
The in-house Bridge Classic Cars fabrication team have been working on the rust repairs to the 1987 Daimler Double Six.
Monty, one of our amazingly talented fabricators, has been hand-making patch pieces for the front end of the Daimler.
Monty began work by replacing a section of the windscreen frame which had corroded. Using the original piece as a template, Monty hand-formed the replacement piece and refined it perfectly to get the patch the perfect shape and size to fit in the windscreen.
After that, Monty turned his attention and skill to the front wings of the Double Six. The wings needed multiple repairs to them, both on the inside and the outside.
Monty has had to remake several brackets and pieces for the car. These pieces have to be precisely bent and shaped to allow the wings to fit back onto the car while also allowing the panel to be adjusted. After this, Monty began to work on the headlights of the 1980s luxury saloon.
Nearly the entire headlight surround had to be cut out of the car but this gave Monty the opportunity to hand-make a replacement piece and have the best fit and finish on the whole piece. The welds were then carefully ground down and some small adjustments made to the piece.
The arches of the 1987 Daimler Double Six are in need of some TLC. So, with the car in the hands of our in-house fabrication team, Monty has begun the process of getting them back to better than new.
Monty carefully removed any affected sections from the sills all the way up the inner wheel arch, making sure to remove material in such a way it could be templated from.
With these sections cut out, Monty began making the replacement pieces by hand to ensure a tight, safe fit to the luxury Daimler.
Then, inch by inch he welded the new sections into the car and ground them down so once the car is painted, you will never know they are there.
The Bridge Classic Cars in-house fabrication team have been continuing work on the rust repairs to the frame of the 1987 Daimler Double Six currently in our Suffolk HQ.
Monty, one of our skilled and talented fabricators, has been working his way through the underside of the classic Daimler. This time, Monty has been repairing and fabricating the front core support cross-member.
This has a series of spot-welded panels and pieces that fix the whole piece into place. Monty carefully drilled out the spot-welds to release the piece from the car. After getting the cross member out of the car, Monty could begin templating the affected areas to create the new patch panels which would need to go into the car.
Monty used his craft and skill to create tight-fitting panels which would mean less cutting to non-damage areas of the car. Preserving as much as possible but also securing them in the safest and neatest way possible. The results, look fantastic.
Monty will continue working through the car making sure all the areas that need attention get the work they are needed to bring this stunning classic Daimler back to its former glory.
The Bridge Classic Cars in-house fabrication team have been hard at work sorting out some of the rust issues on the 1987 Daimler Double Six.
Monty, one of our incredible fabricators, has been working his way through the frame rails and underside on the Double Six to identify and drill out any spot-welded panels which need replacing. To do this, Monty has had to carefully clean back any areas to try and find the elusive spot welds.
Once Monty has identified an area that needs attention and using a specialist bit, drilled the spot welds out he can then begin the task of templating the patches and getting them to fit up tightly to the area. Then, once the fitment is just right, Monty can get the new pieces welded in inch by inch to ensure they remain flat and straight.
There will be more updates on the 1987 Daimler Double Six very soon on the Bridge Classic Cars news page.
Our in-house fabricator, Monty, is continuing his work on getting all of the affected metalwork out of the 1987 Daimler Double Six which is in with Bridge Classic Cars for restoration.
On this update, Monty has been working on a section of the passenger footwell and bottom of the gearbox tunnel. As you see from the first photo, it had become heavily pitted and corroded. So, Monty began the task of precisely removing it from the car in order to use it as a template for a series of replacement pieces he would need to make for the car.
After cutting the pieces out on the bench, Monty could then begin putting them into the car piece by piece to ensure the best fit with the most minimal amount of original material removed as possible but also ensuring it was strong and secure.
With this section of the 1987 Daimler Double Six completed, Monty can now move onto the next area of the car.
Our in-house fabrication shop at Bridge Classic Cars has been working its way through the rust issues on the 1987 Daimler Double Six.
Monty, one of our amazing fabricators, has carefully removed the affected areas on the sills of the luxury saloon. Monty has worked through the sills and replaced them with brand new metal which will perfectly match the original piece. The piece is as close to the original material thickness as to perfectly blend with the existing panel and when it comes to colour and bodywork, it is easier to paint match.
The work will continue on the 1987 Daimler Double Six so keep an eye out on the Bridge Classic Cars newspage.
Monty, one of our incredible in-house bodywork experts here at Bridge Classic Cars, has begun the process of repairing any rust on the 1987 Daimler Double Six that is currently in our Bodyshop.
Beginning with the inner arches, Monty has carefully cut out only the affected area, leaving as much of the original, solid metal as possible. All of the area was then rust treated before Monty began making a template for a new piece to be grafted into the 1980s super saloon. Using the template, Monty rough cut a new piece of metal of the same thickness and began to work on refining the shape and the fitment for the best fit and ultimately the best result for the client.
Once happy with the fitment of the new piece, Monty began to carefully weld it into the car. Ensuring the piece has enough time to cool evenly for the best finish. Although this is for the inner wheel arch, it’s the attention to detail our body shop and all of our restoration teams give to each project that we believe sets us apart. After the new patch piece had been fully welded, Monty carefully smoothed down the welds so that when the area has its paint/treatment, you will never even know it’s there.
It’s been a little while since the last update on the 1987 Daimler Double Six currently in with us at Bridge Classic Cars.
Since the last time, this Daimler has had all its brightwork and trim removed for our in-house restoration team to assess anybody repairs that need to be made to preserve this classic example of British luxury for many more years to come.
Tamas, one of our restoration technicians, has been carefully removing and safely storing each piece of trim that has been taken off the car. Methodically working his way around the entire car until it as you see in the photos.
Since the tear-down has been completed, expect to see more updates very soon on the News Page about this much forgotten Classic.
Classic cars all have the little foibles. This has become more apparent with this 1987 Daimler Double Six we have with us at Bridge Classic Cars to begin an assessment on some rust issues throughout its charming blue paintwork along with several other sympathetic restoration requests.
Dave, our in-house master technician has been trying to get to the bottom of the running issue that we have found with this particular car. The first port of call for Dave was to check the engine was breathing as it should be. On inspection, he found the driver’s intake has no suction through the filter.
After the removal of the airbox, he could feel the suction through to the throttle body. Next in line was to check the spark plugs, no easy feat on one of these with their mechanical fuel injection and the engine bay being a mass of vacuum pipes and necessary parts to run the system.
Dave is continuing to look deeper into the issue to ensure that once all the work has been completed, it can be happily enjoyed by its very lucky owner.
