News

Fitting Up – Washer and Wipers in Place on the 1955 Aston Martin DB2/4

The workshop at Bridge Classic Cars are continuing with the refit of the 1955 Aston Martin DB2/4 Mk1 in for total restoration.

Our technician Scott has been working on getting the various pieces for the washer bottle and wiper mechanism in place as part of its rebuild. With the bottle and mount in place, Scott could begin to make the various lines needed to run up the firewall of the classic GT car but also work around the wooden framing which lies behind and above it.

First Steps – 1987 Volvo 240GL at Pettistree to Begin Work

The amazing all-original 1987 Volvo 240GL has been brought over from The Hangar to our restoration workshop for the teams to begin work on.

The classic Volvo will be handed over to the paint and body team to have some issues taken care of and then be repainted in its original white. Preserving the originality of the car for many years to come.

Keep a look out on the Bridge Classic Cars news page very soon for more updates on the 1987 Volvo 240GL.

From the Ground Up – Making Seat Backs for our 2022 Bridge C-Type Replica

Brian, our lead trimmer at Bridge Classic Cars, has been working on creating the seatbacks for the 2022 Bridge C-Type Replica.

The pieces have been made by Brian and are being entirely trimmed and fitted by hand to the very highest specification for this very special project. The padding for the bolsters on the C-Type Replica is trimmed, shaped and folded onto the seats to perfectly fit under the new covers which are also being worked on.

Just wait until you see the covers…

Readied – Priming the Doors of the 1986 Daimler DS420

After their metal repairs were completed by the fabrication shop, the doors for the 1986 Daimler DS420 have been taken into the Bridge Classic Cars paint shop to be primered.

The doors were first thoroughly cleaned down before the team set them onto the door jigs to be sprayed. The first stage is to get the panels into Epoxy Primer to stop any rust from forming on the bare metal doors. These will then go on to be reworked by the team until perfect and keep going through various sanding and priming stages until they’re ready for paint and then reunited with the body.

Preparations – Removing the Centre Console and Dashboard from the 1987 Daimler Double Six

The trim shop at Bridge Classic Cars have been carefully removing the veneered pieces from the interior of the 1987 Daimler Double Six.

Brian, one of our trimmers, has been removing the centre console pieces along with the dashboard to prepare them for being reveneered. For this, he had to remove all fittings and trim pieces from each panel in order to safely remove them from the car.

Once out, he could get then tear them down further in order to expose the edges of the veneer to be carefully removed and prepared.

Inch by Inch – Repairing the Doors on the 1986 Daimler DS420

As part of the restoration of the 1986 Daimler DS420, the team have been carrying out various metal repairs to the doors of the classic limo.

Our fabrication shop has made multiple patch pieces for the car which all have to be perfect fits to work around the complex compound curves which make up door jams and recesses, while also having the correct orientation to fit into the door openings on the body once closed.

The fabrication team have also replaced the bottom corner of the door due to quite heavy corrosion.

With all of the metal repairs done on the doors, it was time to get them moved over to our paint and body shop for the team to continue the restorative work.

Front End – New Calipers, Polished Indicators and Sorting Out the ABS on the 1998 Honda Integra Type R

The Bridge Classic Cars are working on the front end of the 1998 Honda Integra Type R.

The team have fitted the newly repainted front brake calipers onto the knuckles of the iconic DC2 Integra. From there, the team began to bleed the brake system. But, there was a small issue.

While looking into the problem, the team also removed the indicators from the front bumper to have them polished. They have come as good as new and been reinstalled back into the bumper.

The issue with bleeding the brakes was traced back to the ABS pump. It is believed the system inhale air and caused an air pocket which wasn’t allowing the system to be completely bled.

So, Jon carefully and gently released the ABS lines from the pump in order to ”burp” the system and release the air pocket. With this now done, the team can top up the system with the specific brake fluid for the Integra and bleed the entire system completely.

Straight & Narrow – Suspension Bushes and Alignment on the 1955 Triumph TR2

The 1955 Triumph TR2 has had a few bits of suspension work carried out by the Bridge Classic Cars team.

The team have replaced the offside-front upper arm bushes due to a bit of play in the bush itself and also replaced the outer track rod end on the same side of the car. Jon, one of our technicians, carefully removed the old bushes from the car to make way for the new replacements.

Because the team had unbolted and moved components from the front suspension, it is crucial to have the car realigned. So, Jon millimetre by millimetre adjusted the toe of the classic Triumph until it was perfectly within spec and even on both sides of the car. After road test, all was ok.

Check – Checking Door Clearance on the 1956 Jensen 541

The workshop at Bridge Classic Cars are in the process of getting the doors aligned and adjusted to the body of the 1956 Jensen 541.

To begin with, our technician Rob welded in the A-pillar bracing fully before offering up the door frame. Once in place, he could then begin to check throughout the opening and the door for any interference or clearance issues which needed to be adjusted out before the door skin is test fit and the process done again to double-check.

All of these parts of the build are crucial to the final fit and finish of the car.

From the Inside – Painting the Battery Box on the 1970 Bristol 411

While the 1970 Bristol 411 was in the Bridge Classic Cars paint booth, the team finished off the painting jobs by finishing the battery box, hidden away in the inner wing.

The floor of the battery base had been replaced by the team previously as part of some corrosion repairs. This was then prepared and primed by the paint and body team, before being finished in deep hard wearing black to finish off its look.

Keep a look out on the Bridge Classic Cars news page very soon for more updates on the 1970 Bristol 411 very soon.

This Just In – 1981 Alfa Romeo Giulietta

Just arrived at the Bridge Classic Cars restoration in Suffolk is this absolutely beautiful bright blue 1981 Alfa Romeo Giulietta.

The classic Italian saloon car has come in to be inspected and assessed by the Bridge Classic Cars restoration teams who will compile their reports, so we’re excited to bring you an update very soon on the Bridge Classic Cars news page.

Keep a look out very soon!

Inside the Workshop – 1958 Jensen 541R in Primer

Check out the latest video from Bridge Classic Cars! We go into the paint booth as the team get primer on the 1958 Jensen 541R.

This is the first stage of getting the fibreglass-bodied GT car in perfect condition before its Ice Blue Metallic paintwork.

This Just In – 2008 Bentley Continental GT Speed

Just arrived at the Bridge Classic Cars Suffolk HQ is this absolutely stunning 2008 Bentley Continental GT Speed.

The luxury GT car has come in for our various teams to look over, inspect, assess and report back any findings they have for the car. Once they have compiled their report, we will bring you an update very soon on the legendary Continental GT Speed.

The Continental GT Speed was the fastest and most powerful option that could be specified by Bentley for its original owner. The 6-litre twin-turbo W12 makes a shade over 600BHP with an earth shuddering amount of torque, which was able to push this Flying B all the way past the 200MPH mark.

Perfect Fit – Shaping and Trimming the Seats for Our 2022 Bridge C-Type Replica

The Bridge Classic Cars in-house trim shop has been working on a new set of seats for our incredible 2022 Bridge C-Type Replica.

Lydia and Brian, our in-house trim experts, have worked their magic on creating these replica buckets to exact specifications and shape for an early racing bucket seat. Finished in bright, vivid red, these seats will form the centrepiece of the cabin of the C-Type Replica and really show off just how good our trim shop really is.

There’s going to be a lot more on the C-Type Replica very soon here at Bridge Classic Cars.

Crossing Over – New Door Skin and More Roof Framework on the 1956 Jensen 541

The 1956 Jensen 541 has had some new parts and pieces fitted during its build-up in the Bridge Classic Cars workshop at our Suffolk HQ.#

The team have test fit a new door skin to the frame to make sure everything lines up and fits as it should before then fitting the door to the frame to check for any interference from the door to the bodywork or the various pieces of the framework on the classic 1950s GT car.

Once the door had been checked, Rob, could begin working on the roof frame on the other side of the car. This was offered up and any adjustments needed to make sure it had a correct tight fit up to the roof panel while still being squared and aligned to the other side of the car.

Update – Refitting the 1987 Daimler Double Six

The trim shop at Bridge Classic Cars has been working on getting some of the key trim pieces back into the 1987 Daimler Double Six while removing some smaller pieces to be refinished by the team.

To begin with, Brian fit the new bonnet insulation under the hood of the classic Daimler. This is a noise and heat protector which is cut to shape and rollered on to get the best contact and fit into the recesses under the bonnet.

From there, the team could get the headliner and sunroof for the car finished off. The edges of the opening were finished and glued back neatly into place before the necessary pieces of trim were fitted.

Finally, the team moved to the centre console of the classic Daimler in order to remove switchgear and fittings from the car. This was to then completely remove the weathered panel’s wooden veneer which is being worked on by the team as part of the restoration of the car.

Behind the Scenes – Shooting Our 1979 Porsche 911 Targa

There’s something about the sound and feel of an air-cooled 911. The throbbing, visceral soundtrack, the direct and poised steering and most of all, that iconic shape. This 1979 Porsche 911 is a Targa. It’s essentially a hardtop with a removable roof panel to let the outside in as you become one with the B-Road that lays before you.

That was what the team all took away from shooting this classic 911. Finished in iconic Guards Red with a unique tan and maroon interior, this sports car is certainly as striking as it is timeless. After being given a full check-over by the Bridge Classic Cars workshop, it was given the green light to head over to The Hangar, the base of operations for all of our filming.

The 3-litre Flat-Six pulled strongly across the ex-Airforce base. The car just wanted to run, its long gearing and sensational soundtrack make every occasion in the car special. The signature good looks of the 2nd generation 911 were perfect in the Suffolk summer sun as it made lap after lap of the base without any fuss, this is truly a car for all seasons.

And now, Bridge Classic Cars wants to give one lucky winner the chance of experiencing this magnificent piece of automotive design and engineering forever! That’s right. You could win this 1979 Porsche 911 Targa!

Head over to the Bridge Classic Cars Competitions website by clicking here and enter now for your chance to win this beautiful air-cooled 911.

Check out the official gallery of the car and video below:

Underside – Painting the Sills on the 1970 Bristol 411

The 1970 Bristol 411 had some work done to repair some areas of corrosion on its sills. The Bridge Classic Cars team cut out any of the questionable areas and replaced them with hand-fabricated pieces which were then welded into the car.

Now, the whole car has moved in our in-house Paint Shop for the paint and body team to treat, prime and painted the sills on the classic GT car. The team were careful to mask off any areas where the paint was in perfect condition and only work on the bare metal areas.

Stronger Together – Roof and A Post Brackets for the 1956 Jensen 541

The workshop team have made new strengthening brackets for the roof and A-Pillar of the 1956 Jensen 541 which is in for restoration.

Rob, one of our restoration technicians, has handmade the brackets which are done specifically for each area of the car to tie the various pieces together. After shaping and test fitting, the A-Pillar support could be welded into the car and then the rear roof bracket was welded into the frame after being bolted to the roof.

All of this is part of the process of getting the classic Jensen body into perfect alignment before it is handed over to our in-house body and paint team.

Coming Together – Body Has Arrived for our Bridge C-Type Replica

The body for our personal project has arrived! This will form the outer skin for our 2022 Bridge C-Type Replica.

This is a project we are going to be working on for ourselves. Allowing each member of the team here at Bridge to work on the car towards a single goal.

Plumbed Up – Refitting and Plumbing in the Brakes and Fuel Tank of the 1955 Aston Martin DB2/4 MkI

The 1955 Aston Martin DB2/4 has been getting refit and plumbed up by our workshop here at the Bridge Classic Cars Suffolk HQ.

The team have refit and rebuilt the drum brake system for the car along with running the necessary linkages and cable for the handbrake. Along with that, our technician Scott has made up brand new brake hardlines which have been routed throughout the car and neatly tucked close to the body and rear axle not only for aesthetics but for fitment.

After all of the brakes were put together and plumbed in, Scott could turn his attention to the fuel system.

He fit the classic Aston Martins fuel tank, which was test fit and gently bolted down into place before making up the various fuel lines and again, routing them safely and neatly throughout the car.

The Next Stage – Priming the 1958 Jensen 541R

The paint and body team at Bridge Classic Cars have been working on getting the 1958 Jensen 541R into the next stage of its journey with the team at our Suffolk HQ.

Previously, the team finished masking up classic GT car ready for the first stage of primer to be laid down onto the car in preparation for its Ice Blue Metallic paint job.

The team made sure to cover the body evenly and thoroughly to get the best start to the paintwork as possible. And now with the car in primer, the team will sand it back to look for any adjustments that need to be made.

Faulty – Diagnosing a Faulty Rear Window Switch and Dial Circuit on the 1970 Jaguar XJ6

The workshop at Bridge Classic Cars has been working on diagnosing and fixing a couple of issues with the electrical system of the 1970 Jaguar XJ6.

Firstly, the team carried out a repair on the printed circuit for the instrument dials. Our technician John carefully repaired the circuit before testing the component and found all was working correctly.

Then, he could turn his attention to an issue with the rear heated screen. John traced the fault back to the switch which controls the circuit. The switch was stripped apart, cleaned up and retested. All was ok after the repair.

Changing Places – 1978 MG B GT Back in the Workshop

The 1978 MG B GT has been moved from the paint shop at Bridge Classic Cars to our main restoration workshop for the team to begin reassembly of the classic MG B.

As part of its restoration, the car was stripped back to bare metal and any areas of corrosion fixed before our paint and body teams worked on getting the sportscar into the best possible condition. Then, it went into our in-house paint booth/oven to be refinished in its beautiful Blaze Orange colour you see here.

Come Together – Bolting the Roof and Rear Bodywork to the 1956 Jensen 541

The restoration workshop at the Bridge Classic Cars Suffolk HQ have bolted the roof and rear bodywork to the new frame of the 1956 Jensen 541 for the first time!

After making the careful and delicate adjustments to the framework and chassis of the classic Jensen, the team could begin the process of mocking up the full rear bodywork onto the car to check for any interference or binding.

Stripped Back – Stripping Down the Bonnet and Windows on the 1959 Jensen 541R

As part of the restoration journey, the 1959 Jensen 541R has had its bonnet and windows stripped back by the Bridge Classic Cars workshop team.

The restoration technicians have got everything back to its core components in order to evaluate their condition and operation. Anything that can be refurbished will be worked on to make the pieces as good if not better than new.

Everything removed from the car has been carefully catalogued and put into storage for later in the restoration process.

Complete Set – Seats for the 2022 Bridge C-Type Replica are Finished

If the hard work and craft of our in-house trim expert Lydia could be been summed up in one single project it would be the seats for the 2022 Bridge C-Type Replica.

These seats were templated and handmade from the original seats we borrowed from a good friend of Bridge Classic Cars. These pieces, finished in striking vibrant red look absolutely sensational just sat on the trim shop bench let alone in the cockpit of this incredible car.

Good As New – Restored Radiator for the 1905 Riley 9HP

Friend of Bridge Classic Cars, Carl, has been down to pick up the restored radiator for our 1905 Riley 9HP from Newquay for the project.

The radiator, which was found during a house clearance, was taken to Newquay Radiators to be restored and reworked so it’s as good if not better than new. This is a massive piece of the restoration journey for 117-year-old Riley and we’re excited to start getting everything back together!

This Just In – 2017 Ducati Scrambler 800 Cafe Racer

There’s a new arrival to the Bridge Classic Cars fleet! It’s our director, Craig’s, 2107 Ducati Scrambler 800 Cafe Racer.

This stunning neo-classic will be checked over by the team and a few subtle and personal changes made to the bike. We’re excited to see the upgrades to the bike which Craig has chosen for the bike!

Keep a look out on the Bridge Classic Cars news page for more on the Ducati Cafe Racer soon!

This Just In – 1971 MG B Roadster

Just arrived at the Bridge Classic Cars Suffolk HQ is this beautiful dark green 1971 MG B Roadster.

The restoration teams at the Pettistree workshops will go through the car aesthetically and mechanically to put together their report on the MG B.

Keep a look out on the Bridge Classic Cars news page for more on the 1971 MG B Roadster very soon.