The driver’s seat on our 1989 TVR SII 2.9 V6 was reported as not being able to move on the runners, so Paul took it out to have an investigation. He found that the bottom of the seat frame had completely rotten away, so the driver would have been basically sitting on the floor of the car! He also found that the lever that tilts the “squab” backwards and forwards was seized. He worked his magic on the lever and then passed it over to Brian in the trim shop to finish. Once the covers were taken off, Brian re-painted the frame and put strips of Pirelli rubber webbing across the base of the frame, attaching new springs on the ends to hold it in place. A new piece of foam was also attached to the existing foam for the base seat. The covers could then go back on the frame, ready for the seat to go back in the TVR. Great teamwork guys.
