We’ve welcomed another beautiful Jaguar E-Type for a check-up at Bridge Classic Cars, this week. This one is a 1973 Series 3 V12 E-Type. Upon further inspection, our technician Pete discovered that both the Clutch Slave Cylinder and the Power
Our trim experts have taken apart the 1972 Peugeot 504’s back seats in order to make the new ones. Kath, one of our trim experts has unstitched the old seats and measured up the old parts onto new leather. Once
Our 1987 Mercedes 500SL has had its primer and flattening completed by our technicians Ant and Chris. This stage allows the bodywork to be perfected and smoothened and allows the next layer of paint to stick. This is the last
After many hours work from Bridge Classic Cars’ engine specialist, Ady. It is now time for the engine to be dropped onto the chassis. Ady and Pete have positioned the rebuilt engine back into the 1944 Morris C8. Pete is
We’ve welcomed another beautiful Jaguar E-Type for a check-up at Bridge Classic Cars, this week. This one is a 1973 Series 3 V12 E-Type.
Upon further inspection, our technician Pete discovered that both the Clutch Slave Cylinder and the Power Steering are both leaking fluid and will need to be replaced.
“It’ll fail its MOT if this isn’t addressed” Pete told us, standing underneath the car which had been raised onto one of our ramps.
Although the car is technically drivable, these issues would not only cause the car to fail its MOT, but could also lead to more series issues such as loosing control and access to the gears.
The next step to address these issues is to completely replace both the Power Steering and the Clutch Slave Cylinder.
The front bumpers are also going to be removed and replaced to give the Jaguar an extra shine.
Our trim experts have taken apart the 1972 Peugeot 504’s back seats in order to make the new ones.
Kath, one of our trim experts has unstitched the old seats and measured up the old parts onto new leather. Once this is done, the new parts are stitched together and flute lines added.
The flute lines need to be carefully added so that they line up with the ones on the back squab cover as seen here:
Our 1987 Mercedes 500SL has had its primer and flattening completed by our technicians Ant and Chris.
This stage allows the bodywork to be perfected and smoothened and allows the next layer of paint to stick.
This is the last stage before the colour paintwork begins.
After many hours work from Bridge Classic Cars’ engine specialist, Ady. It is now time for the engine to be dropped onto the chassis. Ady and Pete have positioned the rebuilt engine back into the 1944 Morris C8. Pete is now completing the reassembly before we fire her back into life.
