The 1972 MG Midget has been in the Bridge Classic Cars workshop to have its several bits of work carried out.
Firstly, our workshop team have completely serviced the classic roadster and along with that have replaced the points and condenser in the distributor.
Next up, the team wanted to look into a small leak from the front carburettor which had been noted. When inspected, our technician Jon found one of the carburettor jet tubes had become seized in the Cold Start position and caused the leak. After gently freeing off the tube, he reassembled the unit and tested it. All ok.
Then it was time for Jon to lower the fuel tank out of the car to get to the bottom of an issue with the fuel sender. After removing the unit from the inside of the tank, Jon could carry out the necessary repairs and refit everything back into the car.
The beautiful bright-blue 1971 MG B GT which recently arrived at the Bridge Classic Cars workshop has been bought by a member of the team!
Our Marketing Manager Freddie has bought the classic sports car which he’ll be using as his daily commuter and also for sunny days out to use and enjoy.
Freddie has promised us that he’s going to keep us updated with the little jobs he does on the car and the trips out he makes in his amazing first classic.
The 1972 MG Midget has been in the Bridge Classic Cars workshop to have a few jobs carried out on out as part of its recommission.
The team have replaced the front discs, callipers and pads to brand new replacement pieces sourced by the team. Along with that, the cracked and perished rear bushes were removed from the car in order to also be replaced and set back into the leaf springs.
All of this has been done ahead of the car being collected very soon!
The restoration teams in the Bridge Classic Cars workshop have been carrying on with the metal repairs to the bodyshell of the 1978 MG B GT.
The team have methodically been cutting out any form of corrosion from the classic sports car for it to be replaced with high-quality panels that we have sourced for the project. Each piece of the car is carefully inspected and assessed to see just how far the corrosion has gone into the bodyshell which is then removed and replaced.
All of the team at Bridge Classic Cars love our vintage and classic cars and motorbikes. That’s what sits at the core of what we do here. So, we always try to observe Drive It Day. And international day to celebrate the joy of getting out and driving our beloved classics.
For many years, we have gone to the Kersey Mill meet. And this year, our director Gordon took his newly finished 1934 MG Midget PA to the 2022 Drive It Day meet. Surrounded by countless classics from across our area, some of whom we know well and others we’re excited to get to know.
It is an event on the calendar that we always look forward to. So, take a look below for our full gallery from the 2022 Drive It Day at Kersey Mill.
The workshop team at Bridge Classic Cars have been working on fitting the new cooling system into the 1952 MG TD.
Jon, one of our technicians, has fitted up the new thermostat housing for the car to make sure the wonderful 4-cylinder engine that sits at the heart of the TD is cool. Along with the new thermostat, he made up new coolant hoses which have been routed and sized perfectly for the engine bay of the TD.
The 1968 MGC Roadster is being worked on by the Bridge Classic Cars in-house restoration team to get the classic sports car running just right.
After road tests, the car was running slightly off so Jon set about adjusting the carburettors to get the 6-cylinder running perfect. Upon inspection, he found that 2 out of the 3 carburettors were flooding and allowing too much fuel into the chamber. After adjusting the rest floats, Jon could then work on adjusting and synchronising all 3 carburettors together and ran the car to check the issue had been rectified.
The 1952 MG YB in the Bridge Classic Cars workshop has come into our restoration team for a brake service.
Rob carefully took apart the brakes on the classic MG saloon to inspect all the shoes, seals, cylinders and hardware. Upon inspection of the front brakes, he discovered the wheel cylinders to be leaking and had soaked into the shoe material. So a new set of shoes and cylinders were installed into the front and adjusted out.
At the rear, the cylinders, shoes and hardware were all in good order and just required a rebuild and adjustment. After this, the brake system was bled ahead of it beginning road tests and adjustments if needed.
The interior of the 1952 MG TD had had several more hand-made pieces crafted by the Bridge Classic Cars in-house trim shop.
Lydia and Brian have been working on completely replacing the carpet set in the classic MG with new material in the closest colour possible to the original. Each of the pieces for the car has been measured and made from the original pieces as a template in order to achieve the best fit. Countless times each individual part was test fit into the car before being hand edged and bound.
The trim shop at the Bridge Classic Cars Suffolk HQ have been working on finishing up the interior of the 1968 MGC Roadster.
Brain, one of our trimmers, has been carefully cutting out a new hole to fit up the new clock into the dashboard of the classic and rare MGC. The panel had to be clamped down and the new wood veneer laid over the top to use as a template to mark out the piece.
Once the piece had been marked out, Brian carefully drilled out the new clock opening and finished it by hand. Now that this was complete, he could begin to secure the veneer to the panel.
After the adhesive had cured completely, he could fit the panel into the car and secure everything down into the car.
The restoration technicians in the Bridge Classic Cars workshop at our Suffolk HQ have been busy rebuilding and cleaning up the distributor and carburettors of the 1978 MGB GT.
Rob began by carefully disassembling the distributor on the classic MGB. The internals of the distributor was assessed and inspected, with the decision being to entirely rebuild the whole component and clean up the casing.
The next job was to work on stripping down the SU carburettors and manifolds to assess them. Once the assessment was complete, our technician Rob cleaned up each and every piece of the carburettors before beginning the process of rebuilding and recommissioning the vital intake components.
With these jobs complete, Rob could begin to prepare the engine block for refurbishment and paint.
The Bridge Classic Cars workshop team have been working on inspecting pieces from the 1978 MGB GT which were removed before it entered the body shop.
Our restoration technician Rob has been going through each of the parts to decide if new parts will be required or if they can be refurbished for use in the restoration of the classic sports car.
The 1968 MGC Roadster in the Bridge Classic Cars restoration workshop at our Pettistree HQ has had a series of key jobs finished on the classic roadster.
Jon has been working on getting the MGC Roadster sorted for its new life. Ranging from the engine bay, under the dash and the wheels.
The first job was to fit up the new hoses which lead to the breather tank in the engine bay of the car. This is vital that any excess oil or any fumes are routed into a separate tank. There are several vent tubes associated with the 6-cylinder engine that are required to be routed to the catch can.
Next, he began to look into getting the heater cable fixed in place and linked up to the controller/dial on the dashboard of the MGC. With everything linked up, Jon could test the heating system in the cabin of the classic MGC.
A crucial job that needed to be done on the car was replacing one of the wheel bearings. Jon noticed that the wheel was making some small noises and allowed for some small movement back and forth when rocked.
With all of this done, the car can be completely road tested and signed off.
The restoration technicians in the Bridge Classic Cars workshop have the fantastic 1968 MGC Roadster currently on the ramp to complete several jobs on the car. This time, it’s tidying up the wiring in the engine bay.
Jon has been methodically going through the wiring under the bonnet of the classic convertible sports car to make sure everything not only works correctly but is safely routed around the engine bay. System by system, he has grouped together separate parts of the harness and shielded them where necessary.
The latest car up grabs from Bridge Classic Cars Competitions is this beautiful 1952 MG TD.
The Bridge Classic Cars Competitions team took this stunning little sports car out to the airfield to do its photoshoot. This car is a true reminder for any enthusiasts about the joy of driving, the elegant simplicity of these early sports cars.
As the chirpy 4 cylinder engine buzzed along the runway, the whole team couldn’t help but smile as the classic sports car drove through the forest near our storage facility, The Hangar.
Now, it’s your chance to get a hold of this beautiful little car. Simply click the link below and get your tickets for the 1952 MG TD.
In the latest Bridge Classic Cars film, join the team as they travel to the Port of Harwich to collect a very rare and sentimental 1968 MGC Roadster arriving from Germany and bring it all the way back to our Suffolk HQ.
If you haven’t already, remember to head over to our YouTube channel and like, comment and subscribe.
February 17, 2022 8:47 amPublished by Craig Ranson
We use cookies
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
