The paint and bodywork teams at Bridge Classic Cars have been working on the final processes of the 1987 Mercedes 500SL restoration. Alan, one of
The inner wings and several pieces of the bulkhead from the 1987 Mercedes 500SL have been finished in thick durable Raptorguard by the Bridge Classic
The final parts and panels for the 1987 Mercedes 500SL have been finished in the Bridge Classic Cars in-house paint shop ready for reassembly on
The final panels and trims for the 1987 Mercedes 500SL in for restoration have been prepared and primed by the Bridge Classic Cars in-house paint
The final panels for the 1987 Mercedes 500SL have been carefully and meticulously prepared by the paint and body team at Bridge Classic Cars. Alan,
The 1987 Mercedes 500SL has been moved from the preparation area at Bridge Classic Cars into the paint shop and then, into our in-house paint
The 1987 Mercedes 500SL has had all its fabrication work completed by the fabrication team at Bridge Classic Cars and been moved into the paint
The 1987 Mercedes 500SL has been transferred from our body shop to the fabrication shop at the Bridge Classic Cars workshops. During the preparation of
The 1987 Mercedes 500SL in the Bridge Classic Cars body shop having its engine prepared has turned up some new discoveries. Our body and paint
The Bridge Classic Cars body team have been working on getting the parts and pieces from the doors of the 1987 Mercedes 500SL prepared and
The stunning 1987 Mercedes 500SL which has been in the Bridge Classic Cars body shop getting prepared for its paint job has been transferred into
The final process to get the 1987 Mercedes 500SL restoration ready for its first coats of paint has been completed by the Bridge Classic Cars
The body team at Bridge Classic Cars are continuing at full pace to get the 1987 Mercedes R107 500SL ready to head into the spray
The 1987 Mercedes 500SL is in with the Bridge Classic Cars body shop to be prepared for its upcoming paintwork. Our technician Mauro has been
Tamas, one of our amazing in-house restoration technicians here at Bridge Classic Cars, has been inspecting and cataloguing the parts and pieces from the 1987
The paint and bodywork teams at Bridge Classic Cars have been working on the final processes of the 1987 Mercedes 500SL restoration.
Alan, one of our painters, has been working on cutting back the grey paintwork on the classic R107 in preparation for its polishing. This has to be done very carefully as to not damage the edges of the lacquer/clear coat on the car. A series of finer and finer wet sandpapers are used until the clearcoat is flat, uniform and flawless and then machine polished to a mirror polish.
Also, the team have painted the final pieces of trim on the car in the heavily durable black that other pieces of the car have been finished in.
The inner wings and several pieces of the bulkhead from the 1987 Mercedes 500SL have been finished in thick durable Raptorguard by the Bridge Classic Cars in-house paint shop.
Alan, one of our painters, has been working on completing this task as part of the final paint stages on the classic Mercedes R107. This stage involved coating several key areas of the car with a thick, durable Raptorguard. This particular product seals the surface from any form of moisture that can find its way inside the metal. So, the team have finished the inside of the front wings and several key parts of the bulkhead and heater matrix.
With this done and now curing, the team can soon begin reassembly of the classic Mercedes 500SL.
The final parts and panels for the 1987 Mercedes 500SL have been finished in the Bridge Classic Cars in-house paint shop ready for reassembly on the car.
The team have taken their time to make sure each individual piece has been properly prepared, cleaned and primed before being taken back into the booth to be finished in matching Selenit Grey to the rest of the classic 1980s Mercedes.
Part of the process involved also painting several key parts of the car in a deep black before being masked off and finished in the glossy grey.
The final panels and trims for the 1987 Mercedes 500SL in for restoration have been prepared and primed by the Bridge Classic Cars in-house paint shop.
Alan, one of our painters, has been carefully preparing each individual piece before carefully loading them onto the jigs in our in-house paint booth before laying down the first coats of epoxy primer. After these had flashed off and began to cure, Alan laid several coats of high-build primer for the body shop team to begin working on before they head back in to be finished in matching Dark Grey to the rest of the car.
The final panels for the 1987 Mercedes 500SL have been carefully and meticulously prepared by the paint and body team at Bridge Classic Cars.
Alan, has worked on getting each panel individually prepared and then cleaned down before taking them into our in-house paint booth where they were to be finished in matching Selenit Grey to the rest of the car.
He laid down layer after layer of the deep, glossy grey to the doors and front quarter panels which marks the final major pieces of the 1987 500SL to be painted and the car will soon begin the rebuild of the car.
The 1987 Mercedes 500SL has been moved from the preparation area at Bridge Classic Cars into the paint shop and then, into our in-house paint booth/oven.
The paint and body team, along with the fabrication shop, have spent a lot of time getting the classic R107 ready for its date with the paint booth making sure each part, panel and piece was perfect before beginning the painting process.
The car is being finished in a classic Mercedes colour, Selenet Grey. Most notably seen on the classic 280SL Pagodas, it was chosen to compliment the beautiful burgundy red interior that the trim team have made for the car.
So, with the car ready it was time for Alan and Nick to go into the booth with the car and lay down the first coat onto the body of the SL. Starting with the engine bay.
Alan began under the transmission tunnel and worked his way up and across the firewall making sure every inch was covered to give each coat an even and flowing look. The inner wheel arches and front core support finished off the first stage. Then, Alan began to work getting the scuttle panel and windscreen surround shot in the dark, deep grey and worked his way back towards the boot on the classic Mercedes.
The rear quarter panels and rocker panels were coloured line by line. Each gently overlapping on the previous to give the consistent and uniform look needed to achieve the flawless finish that comes with Selenet Grey. But with the car having its first coat complete, it was time to let it settle and get the paint mixed for the next round.
The 2nd coat was done in the same order as the first. Alan making sure to get every exposed piece of bodywork coated properly for the uniform look. Again, it was all about consistency and movement in order to achieve the finish on the classic R107. And once the 2nd layer had flashed off, Alan waited for the prescribed time and then shot the 3rd coat to finish off the car.
With that, it was left in the ovens to completely cure and harden. Once it has completely hardened, it will be carefully transferred back to the preparation area in order for polishing and preparation for the next stage.
The 1987 Mercedes 500SL has had all its fabrication work completed by the fabrication team at Bridge Classic Cars and been moved into the paint preparation area.
The car has had several crucial pieces of the car’s metalwork repaired by the fabrication shop. The paint and body team then worked on getting the car reprepared for the spray booth by sanding down the panels and masking the car ready for its date with the spray booth.
The 1987 Mercedes 500SL has been transferred from our body shop to the fabrication shop at the Bridge Classic Cars workshops.
During the preparation of the body for paint, our body shop noticed some areas of corrosion in some key places. These are being cut out and addressed by our fabricators so the classic Mercedes R107 is in perfect condition to go back into the body shop to have those areas prepared again for paint.
The 1987 Mercedes 500SL in the Bridge Classic Cars body shop having its engine prepared has turned up some new discoveries.
Our body and paint technicians have been working on getting the engine bay of the classic Mercedes into the same shape as the outside of the car but upon further inspection during sanding, some areas have some rust issues and previous poor repairs.
These will need to be addressed before the rest of the engine bay is finished in primer ahead of its colour coat.
Alongside that our technician, Mauro, has removed several pieces of the suspension in order to get to the harder to reach areas of the classic Mercedes. This is is to make sure every area of the car is inspected, prepared and primered.
The Bridge Classic Cars body team have been working on getting the parts and pieces from the doors of the 1987 Mercedes 500SL prepared and catalogued before being painted and put into storage.
Mauro has been working on checking each of the components before then carefully disassembling and refurbishing anything that needed to be reworked before final assembly on the classic Mercedes.
The stunning 1987 Mercedes 500SL which has been in the Bridge Classic Cars body shop getting prepared for its paint job has been transferred into the spray booth for the first layers of finish primer to be laid onto the iconic classic Mercedes.
Chris, one of our paint technicians, has taken the R107 into the booth and thanks to the hours of preparation on the body by our body team, flawlessly laid down the first in a long process of getting the car into its final colour of Selenit Grau.
Chris treats every coat of primer like it is a final layer of colour or clear and all the paintwork that comes out of the Bridge Classic Cars paint shop is held to the same exacting standards.
We’re excited to show you the next step in the restoration of the 1987 Mercedes 500SL very soon here on the Bridge Classic Cars news page.
The final process to get the 1987 Mercedes 500SL restoration ready for its first coats of paint has been completed by the Bridge Classic Cars body shop.
Mauro has been working on getting the last few pieces of the classic Mercedes ready for its date with the paint booth. Mauro has been meticulously going through the whole car piece by piece to make sure everything is in perfect shape before the first layers of final primer are laid onto the body and panels. This involved several hours of sanding in places with very limited access but needed to be done for the best finish possible.
Along with that, Mauro removed the final parts and pieces from the doors of the 500SL to be able to sand inside the doors so the paint shop can get the best finish possible inside and out.
We’re so excited to see the 1987 Mercedes 500SL finally go into the Bridge Classic Cars paint shop for the first steps of its paint process.
The body team at Bridge Classic Cars are continuing at full pace to get the 1987 Mercedes R107 500SL ready to head into the spray booth.
Mauro has been working on getting every single surface of the iconic grand tourer into perfect shape for our painters to lay down the first coats of ”Selenit Grau”. That is the new chosen colour of the 500SL, originally available on the 280SL Pagodas in the 1960s.
The body team have also worked on getting the window regulators and all brackets, hinges, door strikers etc off of the car and catalogued. Not only for assessment but also to gain access to the inside of the doors to prep them for their new colour.
It’s all moving ahead with the 1987 Mercedes 500SL, and we’re excited to show you the next phase of the restoration on this classic Mercedes.
The 1987 Mercedes 500SL is in with the Bridge Classic Cars body shop to be prepared for its upcoming paintwork.
Our technician Mauro has been working on getting the bodywork in the best order possible before it’s handed over to the paint team. He has been making sure that every panel is flat and smooth before the body goes in to be re-primed and then its full colour and clear coats are applied.
Things are moving quickly on the R107 500SL so make sure to check in on the Bridge Classic Cars news page for updates.
Tamas, one of our amazing in-house restoration technicians here at Bridge Classic Cars, has been inspecting and cataloguing the parts and pieces from the 1987 Mercedes 500SL restoration project we are currently carrying out.
Each individual piece has been carefully inspected and noted down on a manifest to identify if anything is missing and what condition each part is in. This is a very important part of any restoration project we undertake here so if anything is needed to be ordered or sent away for refurbishment it can be done in time for the cars final assembly.
Tamas has gone through hundreds and hundreds of parts for this car, each of them has been individually wrapped and then put away into our parts department for safe keeping.
