Fitting door panels and glove box

Fitting door panels and glove box

Brian has fitted weather strips to the top of the doors, adjusting the ends of the door cappings to let the doors close properly./ He has cut out door panel insert panels and covered in leather. He has fitted insert panels into door panels, fitting door panels back on, fitting top and bottom sections of […]

Interior work on our Jensen 541

Some additional shaping was needed to the floor mats upon inspection. Lydia cut down the sides slightly and shaped the back edge. She added a rubber floor mat to the drivers side to give some protection for the mat. The front carpet mats have been altered to improve the fit and she also located the […]

Built-Up – Making The Rear Seat of the 1958 Jensen 541R

The Bridge Classic Cars interior trim team have been working on making the rear squab seat of the 1958 Jensen 541R from scratch. Brian, one of our trimmers, has handmade each of the wooden pieces before fitting them together and refining their shape before the various coverings and foams are installed.

Top Board – Making the Rear Quarter Panel Top Boards for the 1955 Jensen 541

The top boards for the rear quarter panels on the interior of the 1955 Jensen 541 have been made by hand in our in-house trim shop at the Bridge Classic Cars workshop. Brian has made each individual piece by hand using original templates for the interior of the Jensen 541s. After they have been hand […]

Capped Off – Finishing the Cubby Boxes for the 1955 Jensen 541

The Bridge Classic Cars trim shop have been working to finish off the handmade cubby boxes for the 1955 Jensen 541. Brian has been making the lids for the new cubby boxes. This involves hand finishing the recesses in the lids for the brand new hinges to get the lids to sit perfectly flat onto […]

Seats and Ceilings – Foam and Panel Work on the 1955 Jensen 541

The trim team at the Bridge Classic Cars workshop in our Suffolk HQ are working through the interior pieces and trims for the 1955 Jensen 541. Brian, one of our trimmers, has been working on shaping and putting together the fitted rear seats for the 1950s GT car. Each part of these rear seats is […]

Repadded – New Padding into the Seats of the 1955 Jensen 541

The trim shop at Bridge Classic Cars have cleaned up and repadded the front seats of the 1955 Jensen 541. Lydia has been working on hand-forming each of the padding pieces for the front bucket seats and shaping them roughly. These all have multiple pieces but the forms needed to be just right before the […]

Begin Again – Remaking the Seats for the 1955 Jensen 541

A while ago, we said goodbye to the beautiful Jensen 541. It was sold as a project to its very lucky new owner who plans on restoring the car. Well, now the interior is back in the Bridge Classic Cars in-house trim shop. Brian is making a brand new rear seat for the car while […]

Your Choice – Narrowing Down Colour Choice on the 1956 Jensen 541 Interior

Our Jensen 541R Interior

Our 1957 and 1960 Jensen 541R interiors have completely taken over our trim shop as Brian and Kath return to work. They get straight into the rebuild of our Jensen interiors and as you can see, a lot of the original components are beyond repair so many new templates are being made using the original […]