Our technician Jon has been making progress on the resurrection of the 1962 Jaguar E-Type Series 1 Coupe.
The next stage of the cars journey back onto the open road begins with Jon fitting a new rear brake master cylinder. Having the old unit and new unit next to each other, the positions are slightly different from the original to the new unit, so Jon had to make up new brake lines from the master cylinder to the the join in the offside front floor area. Then, he could fit the new flexi hoses to the front and rear of the car before bleeding the entire system. However, the front of the system bled without issue but the rear we were unable to bleed at this point.
Carrying on with recommissioning the hydraulic system in the car, Jon began work on the clutch. This involved removing the old clutch slave cylinder from the classic Jaguar and the pipework. After fitting up the new system and pipes, he could fill up the circuit and begin to bleed them after securing down the new brake pipes at the same time and then cleaning down/tidying up the work area.
Next up, Jon blew out all of the fuel lines and pipework to make sure that any dust or debris from the workshop wasn’t sat in the lines while the car has been on the ramp before securing them all down to the car.
This is when he could turn his attention to the steering of the car. The steering column support in the lower part of the bulkhead was excessively moving (see video) even after Jon had drilled out the lower universal joint and replacement the worn bolt which connects the two pieces with a new nyloc piece, which improved the movement but was still not clamping fully on the piece. So, he removed the upper part of the steering column first to upgrade the component with new elastin bushes and then begin to refit the piece, however the column still moved excessively in Jon’s professional opinion. The bulkhead column support was then put on order to be refitted into the car.
Whilst the steering column was out of the car, Jon could drain the coolant and remove the radiator from the car after the cars initial fire up and testing, to remove the offside steering rack mount and the lower steering column mount from the engine bay, and fully drill out the universal joint better to clean down all the surfaces and refinish it in a new hard wearing coat of black paint.
With the new bulkhead support on order, Jon turned his attention back to the hydraulics of the car. After topping off all the fluid reservoirs, Jon along with the help of our workshop manager John managed to complete bleed each individual system.
After that, Jon began to put petrol in the new fuel tank for the first time in order to check for leaks in the tank – all was ok. He also swapped over the fuse for the fuel pump to a more suitable and durable unit for the needs of the system. After that, he connected up the battery in order to get fuel pressure from the engine on turn over to prime the system all the way to the pre-filter sight bowl. Then, he disconnected the battery.
Finally, Jon moved onwards to getting the carburettors ready to accept the fresh fuel now in the new fuel tank. He carefully tightened down and inspected all connections from the filter to the carburettors before connecting the battery back up again and the turning on the ignition to prime the fuel system and test. Jon found there was a slight leak from the sight glass under the higher pressure and from the number 1 carburettor. This was found to be an issue with the washers used in the connection to carburettor 1 and fitted a new rubber seal to the sight glass sediment bowl. After that, all of the leaks were sorted and he could the refit and secure the boot floor and all necessary trims.
Our technician Jon has been diving deeper into the 1962 Jaguar E-Type Series 1 Coupe currently in our care for its new owner.
As part of the appraisal process, he has drained the engine of oil and all fluids along with removing the oil filter to inspect. As part of removing the fluids, the team remove drain the fuel tank to inspect the fueling side of the car.
Because of the car being sat for an extended period of time (multiple decades it would appear by the paperwork) the corrosive nature of the fuel left in the tank has wreaked havoc. When Jon removed the sediment filter, which also allows the fuel tank to drive, it became apparent that the fuel had spoiled whilst in there. In Jon’s own words ”Fuel more like paraffin”. With the tank drained, it could then be removed and allow Jon to strip down the tank of its sender unit and pump. After inspecting these components, his opinion is that these components will need complete replacement and cannot be recommissioned, as he reports ”All fuel system items require replacement”.
Then, Jon could go under the bonnet to remove the fuel sight glass and blow through the fuel lines with compressed air to clean through any sediment or debris which could be lurking inside the fuel system.
Jon then began work on tearing down the carburettors on the Jaguar’s straight-six. Beginning with cleaning out the float bowls and then could clean out all of the jets and bridges to make sure that again, no sediment or debris had found their way into the carburettors.
Jon then went through his check lists of resealing the engine with all its various sumps and bungs before cleaning down and continuing on with the carburettor rebuilds.
Once completely stripped down and cleaned, Jon then used vernier gauges to set the static depths of the carbs to their base specifications, and reusing components where possible, in preparation for the team to begin testing ignition and compression once the fueling system has been resolved.
The 1968 Jaguar E-Type 4.2 has been in the Bridge Classic Cars workshop for our restoration technicians to tackle a couple of jobs on.
The first task the team had was to repair part of the radiator. The joint at the top of the filler neck had broken, it had previously been glued, and was bypassing the expansion tank. So, our technician Dave cut off the original to clean up the part and resolder the piece back on.
The next step was for Dave to work on the rear brakes and handbrake of the classic E-Type. The team have gone through and manually adjusted the handbrake on the car as well as fitting a new return spring to the near side rear and having to carry out a small modification to the system in order to fit the new spring.
Whilst looking into the brakes, the team noted the light on the dash, which indicates the brake fluid being low or the handbrake was on, wasn’t working. Upon inspection, the team found the bulb was actually gone from the system but upon testing they found the circuit itself was inoperative and suspect the issue is with the internal switch located underneath the interior of the car which would need to be removed to replace.
Also, the team discovered some paint blistering under the brake fluid reservoir but after inspecting the tank actually found the system to be overfilled and the escaped excess had dripped down and disturbed the paint.
Moving onto the engine of the E-Type, the team found a leak from the back of the Cam Cover on the straight-six. Upon inspection, Dave found an O-Ring from the rev counter mechanism had begun to leak so the team removed it from the back of the camshafts and replaced the seals before fitting it back up to the engine.
September 7, 2022 12:50 pmPublished by Craig Ranson
The trim shop at the Bridge Classic Cars Suffolk HQ have been working on repairing the seat base of the 1951 Jaguar XK120 Roadster while at our restoration workshop.
The team have removed the seat base from the car in order to repair the stitching which has come apart. For this, our trimmer Lydia carefully unpicked the sides to remove the cover to restitch it properly and make sure the repair is near enough invisible to keep the originality of the stunning 1950s roadster.
The latest arrival at the Bridge Classic Cars restoration workshop at our Suffolk HQ is this 1992 Jaguar XJS V12.
The classic Jaguar has come in for our restoration teams to look into and inspect. The teams will be assessing what is needed to be on the car which has been laid up in a garage nearby for a little while.
Keep a look out on the Bridge Classic Cars news page very soon for more updates.
The workshop at Bridge Classic Cars have sorted an issue with the window on the 1954 Jaguar MkVII which is in at our Suffolk HQ.
The classic Jaguar has developed an issue when winding the driver’s window down. The window glass would come off the runner attached to the regulator and then eventually drop to go back into the runner.
Our workshop carefully stripped back the door card and made the necessary adjustments to fix the issue before being put back together for the team to carry on with the other work on the car.
The workshop at Bridge Classic Cars have been looking into a couple of issues with the 1954 Jaguar MkVII which is in at our Suffolk HQ.
Firstly, the team have discovered the radiator hose was making very light contact with the lower crank pulley. It has left a few very small witness marks on the hose itself.
After that, the team look into an issue with the exhaust. Upon inspection, they found the exhaust bracket and the inner parts of the silencer had broken apart. These pieces have been put on order for the car.
Finally, the team have adjusted the air vent linkage which didn’t allow the vent in the scuttle panel to seal correctly which now works as it should.
The winner of our 1966 Jaguar MkII 3.8 has sent in some photos of the car at its first outing at historic Beaulieu.
The car took part in the show Simply Jaguar where it was joined by nearly every generation and modern of Jaguar possible. From early SS cars to the newest F-Type, everything was on display along with the normal exhibitions at the National Motor Museum.
We love to see our competition cars out there in the world!
As part of the checks on the reported fuel gauge issue with the 1951 Jaguar XK120 Roadster, Jon has checked some wiring on the classic Jaguar.
Jon has been in the boot of the Roadster to check the wiring for the fuel tank sender which also controls the fuel gauge. He checked the overall condition of the connections as well as performing a continuity test on the circuit.
All came back completely clear and showing a good ground.
Our technician Jon has been looking into an oil leak at the back of the engine on the 1951 Jaguar XK120 Roadster.
After inspecting the engine once it had been run up to temperature, he found the offside rear cam cover was weeping past its seal. After removing it, he found the seal was not the correct arrangement for the back cover on the cylinder head. Comparing it to the resource materials we have for these engines as well as several other freshly built Jaguar straight-sixes from the era we have in our workshop, Jon could come up with a solution to fix the oil leak once the cover was reinstalled.
After the test, there was no longer an oil leak from the back of the cylinder head. However, the rear mains eal in the engine does leak and out the bottom of the bell-housing of the gearbox.
The 1951 Jaguar XK120 Roadster in the Bridge Classic Cars workshop has had our technicians looking into the source of some noises believed by the team to be coming from the legendary straight-six engine.
For this, Jon removed the cam covers on the top of the engine to inspect the tolerances on the tappets which control the valves. After checking these against the spec, Jon did the necessary adjustments to each individual piece until all were within the original specifications for the car. Whilst there, Jon noticed some slack in the cam chain which controls the valves in the engine. On the Jaguar, this can be adjusted to either tighten or loosen the chain which was adjusted until the chain tension was also as close to the original specification as possible.
After everything was checked and double-checked, the cam-cover could go back on with brand new gaskets as well as new breather gaskets to ensure a tight seal for the straight-six. Then, it could be run up and tested and Jon reported no noises occurring in the engine bay.
First of all, congratulations to David! He won the 1985 Jaguar Sovereign V12 during last night’s draw with ticket number 2631 but, along with the live draw the team gave all of our audience a look around some of the other cars stored in our new building.
The Jaguar Sovereign V12 was the main event of the evening but it was surrounded by either current or possible future competition cars and some amazing restoration/customer cars we keep on site. Hayley and Freddie went all through the classic Jaguar showing everyone watching along on the live stream the fine details and modern luxuries which came as standard when the Sovereign V12 was new.
Then, Hayley handed it over to Nick who went through a little bit about our new online classic sales platform MyClassics. An overview of how, why, what and where it exactly is and that it sits with the enthusiasts at heart, whether that be buying or selling a classic it was designed just for them.
A quick look around the fantastic and eclectic mix of classics stored in our new building from a customers 1932 Lagonda Tourer in for our incredible trim team to work on all the way to a modern Triumph Street Twin motorcycle.
But, everyone watching along wanted to know the answer to the ultimate question which hung in the air. Who did the 1985 Sovereign V12 belong to? We also wanted to find out. Heading over to the screen, the team began that process.
Using our pre-published entry lists (these are generated after ticket sales close or the competition sells out) the team verified that the tickets were within the range of between 1 and 3333. Then, it was over to the Google Random Number Generator to let lady luck take control. Hayley set the criteria and as the screen became awash with whirring numbers, the anticipation rose.
Finally, it landed on a number. 2631.
Consulting the entry list, that particular ticket number had been purchased by David Graham. The new owner of the 1985 Jaguar Sovereign V12. So, as we do with all our live draws we gave him a ring to give him the good news.
When David answered, he was thrilled. He had entered for the Sovereign after always wanting a classic to join in with his friends who restore and enjoy classics up in Scotland and now he has his Jaguar V12 to get involved in the fun!
The Bridge Classic Cars workshop have been working on inspecting the 1972 Jaguar E-Type V12 Roadster along with carrying out some small repairs on the classic Jaguar.
The team have checked through the underside and all major components of the classic sports GT and found some areas which will require attention in the future. There are some areas of corrosion starting to form on the underside of the car, several of those have been cleaned up and sealed by the team, as well as some pipework which is out of shape.
One of the jobs the team have done is to replace a split radiator hose which works to cool the V12. This had a quite severe split in the front section so the team removed it from the car and fitted a replacement piece before refill and checking the levels.
The 1970 Jaguar XJ has been in the Bridge Classic Cars workshop for our technicians to look into some running issues with the classic saloon car.
To begin with, our technician Jon road tested the car to confirm the issue with the car and to find out the situation the issue would arise in. After confirming the fault, he could begin to work his way through the fuel and ignition systems in the engine bay.
After inspecting, decided to strip and rebuild the carburettors to make sure that they were clean, clear and working just as they should do. Once rebuilt, they could be put back onto the manifold to begin testing again. The issue had become better but it still had some areas that Jon needed to investigate. He noticed a broken wire inside the distributor which was repaired, and the car was retested but again did not resolve the issue.
The team then took the decision to upgrade the ignition system to an electronic set-up and programme in the correct timing gap and curve to work with the car. After road test, Jon reported that the car worked just as it should do.
Just arrived into the Bridge Classic Cars workshop at our Suffolk HQ is this 1972 Jaguar E-Type V12 Roadster.
The classic Jaguar is in for our workshop team to carry out a series of jobs on the car. Firstly the car will be given a full service alongside a gearbox oil change to the upgrade 5-speed transmission. Then the team have been asked to replace both the differential oil and to drain and refill the coolant system for the V12.
The team will also carry out a full inspection and assessment on the E-Type for its owner and report back any of their findings.
Keep an eye out on the Bridge Classic Cars news page for more updates on the beautiful 1972 Jaguar E-Type V12 Roadster.
With the weather being perfect last week, we thought we would snap some photos of a handful of classic cars lounging in the sun. Some waiting for collection, some just arrived.
Our restoration workshops at the Bridge Classic Cars HQ are always busy. A constant stream of cars coming in for our team to work on or going back to their owners to be enjoyed so as Nick walked past the eclectic row of cars lining the side of our workshop, he thought he’d grab a few photos to show them off.
This gorgeous 2007 Jaguar XKR has just arrived at the Bridge Classic Cars Suffolk HQ to go into our restoration workshop.
The car will be going through our various in-house departments to be inspected and assessed to compile their report on the condition of this future classic and see if anything needs doing to the big supercharged Jaguar.
Keep an eye out on the Bridge Classic Cars news page for more updates on the 2007 Jaguar XKR.
This beautiful 1985 Jaguar Sovereign Double Six has just arrived at the Suffolk restoration workshops at the Bridge Classic Cars HQ.
The car has been amazingly cared for by its previous owners but will be completely inspected and assessed by the in-house restoration teams to see if there is anything that this big classic Jaguar needs or wants for.
The workshop at Bridge Classic Cars has been working on the 2003 Jaguar XKR which came to use for a knocking noise from the rear.
Upon inspection, our technicians noted that the rear link rods were heavily corroded and had a substantial amount of play in them which could be contributing towards the report knocking noise. These were changed by the workshop technicians to retest and see if it improved the knocking noise.
Recently, the owner of both the 1973 Jaguar E Type Series 3 Roadster and 1973 Triumph TR6 came to the Bridge Classic Cars workshop to test drive and inspect his newest projects by the team.
Each of the cars was inspected by Stephen before being taken out on several test drives to sort of suspension setups and any small changes to the car before their delivery to Europe for Stephen to enjoy for many years to come.
The technicians in the Bridge Classic Cars restoration workshop at our Suffolk HQ have been working on a slight issue with the driver’s door on the 1973 Jaguar E Type Series 3 Roadster, Fern Grey.
Jon has been looking into the door mechanism which when the window is closed, cannot be opened from the inside.
Upon inspection, Jon found that the window regulator was interfering with the door latch mechanism and had knocked the release bar out of its guide. After removing the bar to modify and straighten the piece, he reinstalled the mechanism into the door and tested its function.
With the slight changes to the door release bar, everything was all okay after testing.
Bridge Classic Cars have recently acquired this beautiful 1954 Jaguar XK120 for sale as a project to be restored.
This XK120 was in the process of being restored by its previous owner who could not complete the project, unfortunately. This XK120 project comes with a full V5 as well as a spare chassis and boxes of spare parts to complete the project.
The previous owner managed to get hold of a correct 3.4-litre straight-six engine for the project, but the car itself is not numbers matching. The car if bought, however, could be restored by our workshops if required.
For more information have a look on the advert on our brand new sales platform, MyClassics!
The 1971 Jaguar XJ6 which had some engine work recently has gone back home to its owner after everything has been completed on the car.
The Bridge Classic Cars technicians worked on replacing both fuel tanks on this stunning light blue XJ6 late last year before discovering the engine also needed some work to be done in order to get it running 100%. The team cleaned out every coolant galley in the engine block while the cylinder head was being repaired.
With everything complete and tested on the XJ6, it was held out our secure storage facility, The Hangar, while it waited to go home. Just before, we pulled it out to take some final photos with this wonderful piece of Jaguar history.
February 24, 2022 1:49 pmPublished by Craig Ranson
The latest arrival into The Hangar, the Bridge Classic Cars secure storage facility is this legendary 1954 Jaguar XK120.
This car was acquired by ourselves due to the owner, unfortunately, passing away and therefore the project has been left incomplete. Tom and Brian went to pick up the car, the spare chassis and the numerous spare parts which had been sourced for the car by its previous owner.
This 1954 Jaguar XK120 will soon be up for sale on the new Bridge Classic Cars MyClassics website.
February 23, 2022 11:12 amPublished by Craig Ranson
Bridge Classic Cars will soon be welcoming this 1954 Jaguar XK120 to our secure storage facility, The Hangar.
This XK120 is an incomplete project with numerous spare and replacements parts in boxes, including a complete spare chassis for the car. The car, all the spares and the V5 have been acquired by us so while its future is decided it will be kept at our safe, dry storage facility.
February 21, 2022 11:20 amPublished by Craig Ranson
The team at Bridge Classic Cars always like to see a familiar face. Just like this, the 1970 Jaguar E Type Series 2 Coupe which we did some work on last year.
This visit is for our workshop team to fit a new Mangoletsi air filter to the classic Jaguar. Now that the car could breathe a bit better, we had booked the car in with our friends over at Hangar 111 to get the E Type on their Rolling Road.
With the car safely strapped down, the team at Hangar 111 could work on getting the carburettors of the E Type perfectly set for the car.
February 15, 2022 4:28 pmPublished by Craig Ranson
Bridge Classic Cars in-house restoration technicians, Jon and Scott, have been working on some minor repairs and revisions to Fern Grey after its tests.
Fern Grey is of course the 1973 Jaguar E Type Series III Roadster we have been building in our Suffolk HQ. After the tests, Jon and Scott noticed some issues with a couple of interior/dash lights which were solved by removing the cover plate and rerouting some of the elaborate wiring with a few pins needing to be recrimped and shielded.
Along with that, Jon has made a new fuel return pipe for the car as he found the original was not returning correctly to the fuel tank. So, with all of the underside jobs finished on Fern Grey Jon could begin to fit the shields to the underside of this one-off E Type.
Now, with everything buttoned up on Fern Grey, our technicians can begin retesting and rechecking the car before its road tests begin.
January 21, 2022 11:04 amPublished by Craig Ranson
The team at Bridge Classic Cars have begun work on the stunning bonnet of the 1973 Jaguar E Type Series III Roadster we have built for a client. With all of the weatherstripping installed into the headlight surrounds, they can now begin with the final brightwork.
All of the chrome for Fern Grey was sent off to a specialist, Wyatt Polishing, for refurbishment and polishing to make sure it looked as good as the rest of the incredible car. Now Paul, one of our in-house technicians, will start the meticulous task of getting the chrome back onto the headlights ready for when the bonnet is finally installed onto the car in the coming weeks.
Expect to see a lot more on the progress of the 1973 Jaguar E Type Series III Roadster here on the Bridge Classic Cars newspage.
The Bridge Classic Cars in-house restoration technicians have finished up the custom-made exhaust on the 1973 Jaguar E Type Series III Roadster that we refer to as Fern Grey.
Paul has been working on getting the new exhaust safe and secure underneath the iconic sports car. From the exhaust collector to the stunning, bright double-tipped outlet which perfectly follows the line of the bottom of Fern Grey.
With the new exhaust fitted underneath the E Type, our in-house restoration technicians can move forward wit the final assembly of this stunning classic Jaguar.
January 12, 2022 10:54 amPublished by Craig Ranson
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
