Our technician Jon has been making progress on the resurrection of the 1962 Jaguar E-Type Series 1 Coupe. The next stage of the cars journey back onto the open road begins with Jon fitting a new rear brake master cylinder. Having the old unit and new unit next to each other, the positions are slightly […]
The team at Bridge Classic Cars have begun work on the stunning bonnet of the 1973 Jaguar E Type Series III Roadster we have built for a client. With all of the weatherstripping installed into the headlight surrounds, they can now begin with the final brightwork. All of the chrome for Fern Grey was sent […]
Scott, one of our in-house restoration experts has been hard at work getting ”Fern Grey” the 1973 Jaguar E Type Series 3 Roadster plumbed and wired. Recently Scott carefully got the newly built 5 litre V12 into place in the car, taking his time to make sure everything was exactly where it should be and […]
We’ve added a splash of colour to our Beverly Hills 1973 Jaguar E-Type roadster. Having arrived over from the US in an Old English White with maroon stripes, the new colour can now be seen for the first time on the inside of the body shell. The colour chosen is Fern Grey. According to the […]
Scott has finished the welding on the Jaguar E-Type 1.5, so he sealed and sprayed Schultz underseal on the underside of the car. He wrapped paper around the gearbox and exhaust to prevent any damage from the spray. He changed the engine oil and filter, greased up and lubricated all joints on the front end […]
Scott has been fitting new parts into the silver Jaguar V12. It now has new lower door seals and chrome trims on the sills (the original ones were missing). Also to be replaced were the cooling fan and the thermostatic switch, because the original switch was faulty and was heating up too high of a […]
Ady continues work on the service of our 1972 Jaguar E-Type V12. We have changed the air filter and fuel filter, we have also changed the thermostat. The gas ram on the bonnet require replacing as well as the door rubbers on the window. The car is a relatively new purchase for the current owner […]
We’ve been taking apart the rear axle on our green Jaguar E-Type Series 1 so that we can rebuild it back up to performance. Scott has been rebuilding the wheel bearings so that he can fit new ones.
We’ve worked on this Jaguar E-Type V12 before but this time it’s only in, in part. Ady has been taking the carburettors off it to be able to strip down, clean and assist.
Matt and Chris have been working on applying filler to our white Jaguar E-Type so that they can smooth and shape the body, ensuring there’s not rippling and the surface is even in preparation for paint.
Our Jaguar E-type Roadster that’s in for a full restoration is currently sat in the paint shop in epoxy primer. Matt and Chris will then need to shape up the body by applying filler to make sure the body is smooth and perfect without any dents.
This gorgeous 1972 Jaguar E-Type Series 3 V12 is in for a service. The client has just purchased the car and wants peace of mind that everything is in order. We’re due to check the oil levels, test drive it, supply and fit chrome strips to the top of the sill, secure wipe strips on […]
Scott has been working on our 1968 Jaguar E-Type 4.2 by removing the rear axel and stripping it down ready to rebuild it. He’s also carried out a lot of welding to make the car safe for its MOT. We expect that in the future this car will need new floor pans and sills as […]
Scott has removed the rear axel on our 1968 Jaguar E-Type Series 1.5 to fit new brakes and started spot welding the seat mounts from underneath which were showing signs of wear.
The body of our 1973 Jaguar Series 3 Roadster has made its way to our paint shop to start on the colour prep which includes coating it in epoxy primer. You can see the before and after video below. Brian has also been fitting the second squab cover to the frame. He’s pulled the cover […]
Ady has been working on our 1968 Jaguar E-Type Series 1.5 Coupe. He’s taken the clutch mater cylinder off, identified that the pipe on the radiator needs re-soldering, the radiator needs reconditioning, the servo needs to be replaced, and both front callipers have been stripped, cleaned and put back on. Ady has also discovered the […]
Our dusty barn find Jaguar E-type 1.5 coupe has been cleaned and started, and we’re delighted to discover it still has its roar intact. It started up with little trouble. We can now start to assess what needs to be done and compile a list of amends for the client.
Our 1973 White Jaguar E-Type Series 3 Roadster is undergoing a double-whammy with both interior and exterior being worked on simultaneously. Brian has been assembling the seat bases by fitting the rubber diaphragms to the seat frames, marking out the foam and gluing it to the base, gluing the centre of the seat covers to […]
This 1968 Jaguar E-Type Series 1.5 4.2 has come in for a re-commission and possible restoration. We’re evaluating the extent of the work as we aim to first get it to MOT standard and work on enhanced reliability as the owners aim to take it around Europe. We’re told its been sat in a barn […]
Scott has been rebuilding the rear axel for our 1973 White E-type Roadster. Everything has been replaced, refurbished and rebuilt to create a perfectly functioning rear axel. James has also been doing some lead work on the E-Type as he works on fixing holes left by removing American modifications. Chris has also rubbed down and […]
Our 1973 Jaguar E-type Series 3 Roadster is currently in the fabrication bay where James and Pricey are working on leading the body. This classic is in fantastic shape with very little bodywork needing to be done. Pricey tells us “I’ve never seen one this good and I don’t think I ever will. It’s amazing.” […]
The Jaguar E-Type Roadster Series 3 is back in the fabrication bay for some leading. The selection of photos below show inconsistencies in the front over-riders that need addressing to obtain symmetry and leading the spot-welded joints on the shell to ensure there is no cracking or sinking of fillers and paint later on. We’ve […]
We’ve now received the new clutch for our 1967 Jaguar E-Type Series 1 Race Car which can be fitted to replace the faulty one. We’ve also manufactured a bracket for the starter motor as it wasn’t engaging. Once everything is fitted back together again, it will need a test drive to understand if it is […]
We’ve now got the new clutch in for our 1967 Jaguar E-Type Series 1 Race Car which suffered from a faulty flywheel. Now with the new part, we hope this one will be able to handle the speed.
James has been shrinking the bonnet skin of our 1973 Jaguar E-type Series 3 Roadster to make profile match on both sides. Once he finished converting the left hand front bumper from USA to UK spec he fitted it with rubber and re-shaping it to give an even gap on the body. This is so […]
More inner components have been painted for the 1973 White jaguar E-Type Series 3 Roadster. Parts have been had air box primer applied and then painted silver. Other parts have been painted black.
Before we get the body and panels of our 1973 Jaguar E-Type Series 3 Roadster in for paint, we need to start painting the internal parts in black epoxy. The majority of these parts will be totally or partially hidden either under the car or within it, however, it is important to have them all […]
Scott has stripped the handbrake callipers and sandblasted the parts so they could be painted. Scott then started to put the rear axle together.
Our 1967 Jaguar E-Type Race car is feeling rather poorly at the moment and is awaiting a new clutch from Norfolk Clutch and Brake who are fabricating a new heavy duty clutch.
Our 1973 Jaguar E-Type recently came back from Abbey Protective Coating’s for sandblasting. Now that any excess rust has come off, we can start to work with all the stable metal that’s left. This E-Type is a particularly strong example as there was very little corrosion. Tom has been sorting out parts which were then […]