Our 1955 Aston Martin DB2/4 has begun its process of being stripped down by classic car technician Rob. It will be stripped down to a bare chassis, ready for its full restoration to get properly underway.
After removing the body of our Aston Martin DB2/4 yesterday, classic car technician James has continued his work on the strip down of this classic Aston. The front doors and windows have now been stripped out ready for refurbishment, all parts will be cleaned, sorted, painted or replaced where necessary before refitting the newly painted […]
The mechanical strip out of our 1953 Aston Martin DB2/4 has started at the rear of the car. The tailgate, lights, spare wheel carrier and fuel tank have all been removed. Classic car technician James actually found some of the original black paint on the car too! The dashboard and clocks have also been stripped […]
Brian and Lydia have continued their work on our 1953 Aston Martin DB2/4. Using the new plywood panels that Brian had cut out for her, Lydia covered them in leather at the top. The bottom part is a piece of carpet with bound edges, so she also cut and sewed this , then attached it […]
Brian and Lydia have been working on our 1953 Aston Martin DB2/4, specifically the centre console and rear panels. Using the existing material from the original, Lydia remade the centre console to match the new leather choice. This involved cutting and making new piping, new top and side sections, and also covering the wooden base […]
We currently have 3 Aston Martin DB2/4s in the Bridge Classic Cars workshop. Out of all of them, our 1955 Aston Martin DB2/4 Mark I is the furthest along its restoration journey. In fact, it is coming to the end of its time in the workshop, and preparations have already begun to complete road tests […]
Brian has started work on our 1955 Aston Martin DB2/4 Drophead Coupe. He has been making the centre console lid. He did this by making the wood base, adding the wood edge sections, glueing this to the base section, making a new foam top section, cutting to shape, and fitting foam to the wood base.
The Bridge Classic Cars interior trim team of Brian and Lydia have continued their work on the interior of our 1953 Aston Martin DB2/4. Lydia carried on her previous work making the seat backs. She altered the shaping slightly to improve the fit, added piping where necessary and then attached the sides. Lydia then fitted […]
Interior trimmer, Lydia has been working on the backrest part of the front seats of our 1953 Aston Martin DB2/4. This was slightly more challenging than expected as they are much larger than the bases, and the flutes run all the way up the faces. Lydia used her pattern from the bases for the flutes […]
Interior Trimmer Lydia has made some additional piping to add to the rear panels of our 1955 Aston Martin DB2/4, which will close up the gap between the panel and the roof. This improves the movement when you open the boot lid.
Interior trimmer Brian has been continuing his work on the 1953 Aston Martin DB2/4. He sandblasted the metal frame legs on the front seat squab frames. He then glued 10mm of foam on top of the original front seat back foam before trimming it to size. The old covers from the rear seat base panels […]
Classic car technician Brian has continued his work on the interior of our 1953 Aston Martin DB2/4. He removed the covers and cleaned the old glue off the door pockets before removing the old leather from the rear side cappings. The cover was then taken off the door panel and Brian made new sunvisor boards […]
We have recently added an extremely exciting classic car to the Bridge Classic Cars collection. Director, Gordon has purchased our 1953 Aston Martin DB2/4 and it is beautiful. There has been a DB2/4 in the workshop for a while as we have been restoring it for a customer. However, this new addition is currently in […]
Bridge Classic Cars workshop manager John has been continuing his work on our 1955 Aston Martin DB2/4 as it gets closer and closer to leaving us and being returned to its owner. The trafficators have been fitted up and installed and John has also fitted the under-bonnet light. Once everything was wired in, John tested […]
Our 1955 Aston Martin DB2/4 Mark I has been in the care of classic car technician Brian as he has been working on various parts of the interior. He has fitted the door pockets, the front window surround panels, the lower A post panels, the dash tray top panels, the dash top panels, the rearview […]
Our 1955 Aston Martin DB2/4 Mark I has been making very good progress through its restoration journey lately. This has continued with classic car technician John wiring up the lights and fitting up the bonnet and boot. Once this was done, the car was actually taken to a car show being hosted by the owner […]
Workshop manager John has been working on our very special 1955 Aston Martin DB2/4 and has been fitting new reverse lights. Our rare Aston continues to be the focus of the Bridge Classic Cars team and it is looking better and better with each day that passes. We are sure the owner will be very […]
Workshop Manager John has been working on the electrics of our 1955 Aston Martin DB2/4. He has been checking all of the wiring and switches to make sure everything is working as it should. As it stands, only the wipers are working but John will no doubt get everything up and running very soon. Once […]
Classic car technician Scott has continued his work on our 1955 Aston Martin DB2/4. After getting the engine back into this rare classic car, Scott turned his attention to the doors. He fitted and built up the doors before fitting the glass, handles, and trim. On a car that is as rare and as beautiful […]
More interior work has been completed by Brian on our 1955 Aston Martin DB2/4 Mark I. He first cut out new leather for the rear seat base pad before he glued the foam and leather onto the rear base seat panel. Brian went on to turn the leather around the edges of the panel. He […]
The bonnet of the 1955 Aston Martin DB2/4 currently in with Bridge Classic Cars for restoration has finally been reunited with the body of the 1950s sports car. The bonnet has been placed onto the body before it is adjusted and fitted. This is to make sure all the amazing work Alan has done on […]
Scott, one of our amazing in-house restoration technicians here at Bridge Classic Cars, has been skillfully and carefully putting the front suspension of the 1955 Aston Martin DB2/4 Mk1 back together for the next phase of its restoration. Scott began by getting the front hubs of the classic sports car built on the bench. With […]
Clinton is now in the final stages of repairing the boot lid. Chris and Matt now have the bonnet to prepare and paint the underside. There are certain areas of the bonnet that once fitted to the car are then not easily accessible. Painting the underside now means Clinton can then fit up the bonnet […]
We’re in the process of reconstructing the Aston Martin DB2/4 bonnet which is showing signs of dubious structural integrity. The team have removed the frame from the bonnet so that they can fix it. This had to be done by cutting it in half and sliding it out on either side, meaning that when they […]
Brian has been working to remove the covers from the rear sear rub backs on our Aston Martin DB2/4. He’s taken apart the covers and used them to mark out leather for new covers. He’s then sewn the covers together and glued the original foam back onto the metal seat. Brian has added extra layers […]
Brian has been taking apart the the covers from the rear base and squab seat on our Aston Martin DB2/4. He’s un-done the hinge from the bottom edge and top section of the squab and removed the rubber strips from their metal channels. Once he’d undone the metal trims, Brian then removes the tacks holding […]
After many discussions, we’ve decided on the interior for our Mille Miglia Aston Martin DB2/4. The carpet will be a dark grey with claret red seats and 1206B Schiefer grey piping.
The bonnet to our DB2/4 has been stripped to bare metal by Matt in the paint shop so that the fabrication bay can see what’s underneath the paint and understand what needs addressing and fabricating before it goes back to paint.