Rover 216 Cabriolet Roof Fitting Continued…
November 2, 2023
The new roof is progressing well on our 1995 Rover 216 Cabriolet. Brian has been busy glueing headliner to the front edge of the roof
classic car headlining
Jensen 541R headlining fitted
September 15, 2022
The roof bars have now been removed to make way for the new foam to be glued and fitted. The bars, covered in the correct
Headlining panels for the Aston.
July 29, 2021
Lydia has been re-covering the headlining panels for the Aston Martin DB 2/4 Mark I. She started by peeling off the original fabric from each
Rover 216 Cabriolet Roof Fitting Continued…
November 2, 2023
The new roof is progressing well on our 1995 Rover 216 Cabriolet. Brian has been busy glueing headliner to the front edge of the roof frame.
Jensen 541R headlining fitted
September 15, 2022
The roof bars have now been removed to make way for the new foam to be glued and fitted. The bars, covered in the correct material are then screwed back into position. The headlining is then positioned and carefully glued around the edges before being tightened and secured. Finally, access is gained in the new material for the interior light wiring.
Headlining panels for the Aston.
July 29, 2021
Lydia has been re-covering the headlining panels for the Aston Martin DB 2/4 Mark I.
She started by peeling off the original fabric from each of the different panels and sanding down the old glue and giving the wood and metal a clean up.
The original fabric pieces were used as patterns on the new headlining fabric, and Lydia drew around them using a fabric pencil. They were all cut out and then one by one, wrapped around tightly onto the panels and glued into place. These panels will go around the sides, front, back and middle of the headlining in the car.
