C-Types Lights And Indicators

C-Types Lights And Indicators

Jonn has been working on our 2022 Bridge C-Type Replica. He raised it up on the ramp and removed the centre under trays. He then worked out where and how to fit the prop shaft speed sensor pick up and sensor. After measuring the length of wire required to connect the indicators, a small twin-core […]

C-Type Bonnet

John has been fitting the temperature sender to our 2022 Bridge C-Type Replica. He also routed the wiring and secured it under the manifold. He then started to fit up the bonnet before fitting the headlight mounts and headlights to both sides. The grille was fitted to the air intake which was then installed. John […]

C-Type Door Card

Lydia has recently been making a pretend ‘door card ‘ to balance out the interior of our 2022 Bridge C-Type Replica. There is only one door, with a very small area that Lydia has made a covering for, so she had to work out something that would look good on the other side too. She […]

Priming Our C-Type Replica

Classic car technician Alan has been continuing his work on our special 2022 Bridge C-Type Replica. While it has been in the Bridge Classic Cars paintshop, Alan has been preparing the vehicle to be painted. The next stage of this preparation was applying primer. After a change of plan, our C-Type Replica will now be […]

More Prep Work

Classic car technician Alan has continued his work preparing our 2022 Bridge C-Type Replica for its new coat of paint. Now that the new colour scheme has been confirmed, the filler and panel levelling continued as our C-Type Replica continues to make good progress through the Bridge Classic Cars workshop.

Templates For Our C-Type Replica

Classic car technician Brian has been making templates for various parts of the interior of our Bridge C-Type Replica. He started by removing the seats and loosening the seat belts before making a paper pattern for the rear gearbox tunnel. A pattern also had to be made for the centre tunnel section. Once he had […]

Gear Lever Gaitor

Lydia has been making the gear lever gaiter for our 2022 Bridge C-Type Replica. As you can see from the photos below, the gaiter looks great and will make a perfect addition to this very special vehicle.

Progress – Wiring Up the 2022 Bridge C-Type Replica

The workshop team at Bridge Classic Cars have been working on wiring up our 2022 Bridge C-Type Replica. The harness has been routed through the body and frame of the car to be trimmed and connected where needed. The team have also fit the spotlight which will sit behind the grille of the classic racer.