A panel from our 1960 Jensen 541R had its external areas masked before the interior surface was coated with black satin Raptor. The car was then flatted down in preparation for polishing.
Adam has masked the 1960 Jensen 541R and progressed it into the colour stage. An undercoat was applied first, followed by the main colour and then the clear coat. The wheel arches have been prepared, primed using a wet-on-wet process, and finished in satin black.
A guide coat has been added to our 1960 Jensen 541R. The primer was then rubbed down ready for final paint. The car was then masked up and will soon have its beautiful new paint applied.
Our 1960 Jensen 541R has been fully masked and been in polyfan. A guide coat has been applied to the car, and the polyfan has been rubbed down using 180-grit sandpaper. The vehicle is now ready for its final primer application. Before sending the side trims for chroming, they have been marked out and aligned […]
Chris has been continuing his work on our 1960 Jensen 541R. Recently, he has applied a guide coat and rubbed the car down. As he continues to prep the car for paint, it’s getting more and more exciting to see the progress being made.
Chris continued fitting up our 1960 Jensen 541R for final panel levelling and gapping. Chrome work was installed, and all panels were completed in preparation for the polyfan application. Any exposed bare metal areas were coated with epoxy.
Paul has been fitting the front discs, callipers, and steering arms to our 1960 Jensen 541R. He also fitted the engine mounts, fitted and aligned the clutch before starting to modify the chassis in order for it to take the seat belts.
After Tony collected the engine of our 1960 Jensen 541R, Paul fitted the clutch and brake master cylinders to the car. He then cut the heat shield to shape and fitted it to the bulkhead. Paul went on to prepare the fuel tank before fitting it. The flywheel has also been prepped.
Classic car technician Paul has started preparing the front suspension for our 1960 Jensen 541R.
Christian has been hard at work in the fabrication bay making bonnet brackets for our 1960 Jensen 541R.
The near side lower corner of our 1960 Jensen 541R has been repaired by Alan. He also replaced both quarter-panel window rubber holders. Once all the repairs on the underside of the body were complete, Alan masked out the parts that need sealing when they are attached to the body frame. He then blacked the […]
The body of our 1960 Jensen 541R has been removed ready for work to begin on it.
Lydia has been stripping the seats of our 1960 Jensen 541R ready for new covers once the fabric has been chosen.
Since the chassis of our 1960 Jensen 541R returned to the Bridge Classic Cars workshop, classic car technician Rob has been completing repairs. However, recently, Rob progressed to starting the long process of putting our 541R back together again. The main body is now back on the chassis and the whole thing is starting to […]
Classic car technician Rob has, once again, been working on our 1960 Jensen 541R. One of the areas he has been focused on is the right-hand side rear body frame and B post. These were both made and welded into place. Rob then went on to repair and weld the front bulkhead and A posts […]
Classic car technician Rob has continued his work on our 1960 Jensen 541R. Rob has made new door steps and fitted these. He has also made the left-hand B post and welded this in before doing the same for the left-hand rear body frame parts. The rear floor mounting panels were replaced too.
Our 1960 Jensen 541R has stayed under the care of classic car technician Rob. Rob continued his work making and welding panels for the right-hand rear wheel arch. Once this was finished, he began the process all over again on the left-hand side of the chassis. This involved more cutting and welding. Like the right-hand […]
Since the chassis of our 1960 Jensen 541R has returned from sandblasting, classic car technician Rob has found some old repairs that need to be cut out and corrected. These repairs have clearly been done at some point in the car’s life before it found its way into the Bridge Classic Cars workshop. Now that […]
The chassis and body of our 1960 Jensen 541R has come back to the Bridge Classic Cars workshop after their trip to the sandblasters. Now they are back with us, the restoration of our 1960 Jensen 541R can continue.
Our 1960 Jensen 541 is back in the workshop and in the very capable hands of classic car technician Rob. In preparation for sandblasting, Rob has removed the body and the roof frame. With a history like this car has, it is exciting to see it progress through its restoration journey and be one step […]
The subframe from the 1960 Jensen 541R has arrived back at the Bridge Classic Cars workshop after being sent away for blasting. The team sent away the subframe for blasting to get a better look at the condition of the piece. Once it arrived back, the team have noticed that several of the mounts and […]
In the trim shop, Brian has been fitting the front squab seats of the 1960 Jensen 541R to their foams and frames. These seats were created and sewn by Lydia a little while back. You can read about the process here and here. Brian started the fitting process by glueing and stapling the front squab […]