Marketing Manager
The team at Bridge Classic Cars have been making progress on the beautiful 1959 Jensen 541R in our restoration workshop.
Firstly the team began by removing the seats in order to correctly fit the centre console of the classic Jensen. For some reason, it had been previously fitted backwards. So, the team removed the seats to get access and then reinstalled the piece in the right orientation.
Next, the team began work on replacing the rear windows of the car. These are plexiglass pieces which have been made specifically to fit the 541R, the team carefully refined and worked them into place.
The team have also gone through the fuel system of the car. Upon inspection, they found an issue with the several filters and pipes leading from the fuel tank to the carburettors. Our technicians noticed the main feed line had a severe kink in it which was causing a fuel flow issue and along with that, replaced the in-tank fuel filters (both primary and reserve) to make sure the big straight-six is getting all the fuel it needs.
A request by the owner of the car was to fit a new steering wheel to the classic Jensen 541R. For this the team also went into some of the switches and selectors to service and clean them out. Then, they could begin to remove the original steering wheel. Uniquely, the 541 steering wheel is actually riveted to the boss. The team carefully drilled out each individual rivet to separate the steering wheel from its boss. Then, working in reverse with the new steering wheel the team reattached the wheel and got it back into the car.
And while they were working on the interior, they have replaced the handles with new pieces which really set off against the grey/blue inside of the classic 541.
