News

Refitting Our DB2 Grill

After the re-chromed grill of our 1955 Aston Martin DB2/4 arrived back at the Bridge Classic Cars workshop, classic car technician Steve fitted it back onto the car. As you can see, the already stunning classic looks even more impressive

Read More »

Aston Martin Seats

Interior trimmer, Lydia has been working on the backrest part of the front seats of our 1953 Aston Martin DB2/4. This was slightly more challenging than expected as they are much larger than the bases, and the flutes run all

Read More »

Mechanical Work on Amphicar

The new clutch has been fitted and the engine re-installed in the car. All of the ancillaries have been refitted, the radiator has been tested and refitted also along with the exhaust. The engine has been run up with new

Read More »

Aston Martin 2/4 Interior taking shape

To begin with, Lydia has made a mock-up panel to test the measurements for the tuck and roll flutes. This requires precise measurement and calculation to ensure that the flutes end up at the correct width. If they do not,

Read More »

Jensen 541 Interior Work

Fitting inner glovebox top section and outer panel. We have glued the vinyl to the bottom section, fitting hinges to the glovebox lid, fitted lock to the lid before fitting lid to the glovebox outer panel. Brian has also made

Read More »

Volvo 240 interior refit

Today the interior was refitted; seats, seat belts and boot areas that were removed for metalwork/welding. On refitting the passenger seat, we found the back rest bolts had worked loose and fallen out, these were refitted with thread lock to

Read More »

From red to silver

Now that the wheels have returned from our good friends at Wheelworx having been re-coloured from red to silver, Jon has refitted them to make the car mobile once again. He has then removed the axle stands and dropped to

Read More »

Inner arch repairs on our Honda S2000

Monty has started on the corrosion repairs on our S2000 this week. As you can see, the rear inner arch requires some fabrication and welding to correct the corrosion before the paint shop take control to make it all look

Read More »

Fitting door panels and glove box

Brian has fitted weather strips to the top of the doors, adjusting the ends of the door cappings to let the doors close properly./ He has cut out door panel insert panels and covered in leather. He has fitted insert

Read More »

Pre Delivery Inspection – Jaguar F-Type

Our Christmas line up is being prepared as we speak. We have an amazing selection of competitions coming up between now and Christmas. Something for everyone I’d say. Our incredible 2015 Jaguar F-Type is currently going through it’s inspection and

Read More »

Ford Transit Mk2 In Paint

The bumper of our Ford Transit Tipper MKII is all painted and now finished in a satin clear. The rear suspension springs have also been in the paintshop and have had black dtm applied. Chris has also fixed and painted

Read More »

Austin Healey pre delivery inspection

Jon is currently carrying out the pre delivery inspection on our 1958 Austin Healey 100-6. He has secured both front seat bases as the bolts were missing in the frames. Tighten and test and all ok. He has drained approximately

Read More »

Volkswagen Beetle nearing completion

We are so so close now with our Volkswagen Beetle completion. Jon has attended to the bonnet seal at the bulkhead. Align and cut to length in the new channel. We have drilled holes along the length. Align on car

Read More »

Amphicar assembly continues

More progress fitting the doors and locks, bonnet catches and lock covers, final assembly of the dashboard and controls including cables. The front and rear bumpers and over riders have been fitted along with the outer door handles.

Read More »

Rover 216 Cabriolet hood fitting

Brian has glued the flaps around the rear side window area of the frame, fitting rubber seals, fitting rear of headliner to the parcel tray. He has glued the metal side bars to the hood cover, bolted the metal bars

Read More »

1979 Ford Escort Ghia Repairs

Jon is preparing the Escort for next week’s competition draw. He has stripped and removed the carburettors. Stripped and checked that the jet sizes correspond with the 2000cc engine in 32/36 carb setting. The jet sizes are all ok. He

Read More »

Interior work on our Jensen 541

Some additional shaping was needed to the floor mats upon inspection. Lydia cut down the sides slightly and shaped the back edge. She added a rubber floor mat to the drivers side to give some protection for the mat. The

Read More »

London to Brighton Veteran Car Run 2023

This weekend Gordon was delighted to attend the London to Brighton Veteran Car Run once more, the spectacle never failing to make an impression on him. This annual event, steeped in history, has been running almost consistently since its conception

Read More »
Archives
[archives type=yearly format=option]

[archives type=yearly format=option]