Brian has been continuing the interior trim work for the 1955 Aston Martin DB 2/4.
This time, he’s been working on a pair of dash trays and a pair of under dash panels. For the dash trays, Brian started the process by taking off the rubber lip that went around the hole, then took off the original fabric pieces. He cleaned off as much original glue from the metal frame of the under dash panels. He then lay out the new headlining fabric chosen for the car, and placed the original fabric pieces on top of it, using them as patterns. Once marked out around, Brian cut out the new fabric and the first piece to glue onto the metal was the centrepiece. Glue was applied to the back of the fabric and to the metal and then Brian slowly attached the fabric to it, after the glue had gone tacky, making neat cuts around the hole so the material sat nicely. The inside sides were also covered in headlining fabric. Brian then cut out grey leather for the outside of the under dash panels. These pieces were glued on, then the finishing touch was to place the rubber lip back on.
For the under dash panels, Brian simply took the original headlining fabric off them, sanded down the excess old glue, used the original fabric pieces as patterns on the new headlining fabric, cut out, and glued the new material onto them.
