© Bridge Classic Cars Holdings Ltd, T/ as Bridge Classic Cars. Registered in England and Wales with company number 5047706.
Our paintshop have finished work on our 1975 Jensen Interceptor here at the Bridge Classic Cars Suffolk HQ. This car has had a considerable amount of work done by both our fabrication team and our paint and body team, each…
Chris has been painting our 1975 Jensen Interceptor MK3. Once it was painted, Chris began the process of rubbing it down and polishing. As you can see from the images below, it’s looking great already!
Our 1975 Jensen Interceptor MK3 has been in the Bridge Classic Cars paint shop with Chris. He prepped the inside and underneath of the car ready for dtm and raptor. He then applied epoxy to all of the inside and…
Our 1975 Jensen Intercepter Mk3 has been making massive progress recently in the Bridge Classic Cars workshop. With the car being prepared to go into the spray booth for the final time, our fabrication team have cut the body from…
Our 1975 Jensen Interceptor project has made massive strides forward in the last few weeks. The classic V8 coupe has been in the talented hands of our paint and body technician Chris who has worked on getting the car to…
Christian has continued to work on our 1975 Jensen Interceptor MK 3 in the Bridge Classic Cars fabrication bay. He repaired the holes in the boot lid frame and fabricated a battery tray. He also repaired some holes and areas…
We have now received hand delivery of the door surround brightwork, all wrapped and ready to be fitted later on in the restoration journey. For now, they will remain wrapped and will be stored away awaiting their time to shine!
Christian modified the sill step of our 1975 Jensen Interceptor Mk3. He also cleaned the car out and sprayed it ready for storage.
Christian has continued making modifications to our 1975 Jensen Interceptor Mk3. He has modified the top of the door panel to get the panel gap, and he has also modified the cast front side lights to fit the valance nicely….
Fabricator Chris has been working on our 1975 Jensen Interceptor. He has been fitting up and modifying the front bumper brackets, as well as drilling and welding on the mount holes. Chris also modified the door to suit the panel…
Our 1975 Jensen Interceptor Mk3 has been in the fabrication bay with technician Chris. He has been welding the front bumper as well as cutting the bumper mount holes. He then went on to fit up and make the mounts…
Christian has been planishing welds and making panel flat.
Our fabricator, Christian, has been working on our 1975 Jensen Interceptor. Today, he has been working on finessing a patch panel on the left-hand wing of the V8 GT car. This patch panel holds the side vents in place but…
Our 1975 Jensen Interceptor Mk3 is back in the Bridge Classic Cars fabrication bay with technicians Chris and Monty. They have been fabricating new wing patches and started the process of welding them in.
Classic car technician Chris has been continuing his work on our 1975 Jensen Interceptor MK3. To make sure the car is safe to drive once it has been fully restored, Chris has welded in the seat belt mounts. In addition…
Our 1975 Jensen Interceptor MK3 has continued its stay in the fabrication bay with classic car technician Chris. Chris has been busy working on various areas of this interesting classic car. He began by replacing the floor and installing the…
Classic car technician Monty has been completing more repair work on our 1975 Jensen Interceptor MK3. This time, his attention has been on the floor, the inner sill, and the doors. Repairing the metalwork of our classic Interceptor has been…
Classic car technicians Monty and Chris have restarted their work on our 1975 Jensen Interceptor MK3. As you can see from the images below, things are progressing nicely on this classic car and it is slowly starting to take on…
Classic car technicians Monty and Christian have continued their work on our 1975 Jensen Interceptor MK3. The metalwork of any car restoration tends to be the part of the project that takes a lot of time. This makes sense when…
Classic car technicians Monty and Christian have continued their work on our 1975 Jensen Interceptor MK3. They have been busy fabricating a range of different panels and parts for this beautiful classic car. Areas of focus have been the inner…
Classic car technicians Monty and Christian have continued their work on our 1975 Jensen Interceptor MK3. After new front panels were fitted their attention turned to the rear of the car. Monty and Christian removed the rear quarter before fitting…
Our 1975 Jensen Interceptor MK3 continues to make good progress and is beginning to look much more like a car now than it has in recent times. Classic car technicians Monty and Christian have been hard at work fitting new…
Our 1975 Jensen Interceptor MK3 has had several parts fabricated recently. Classic car technicians Monty and Christian have been hard at work making sure the parts being made fit perfectly where they are needed, and can also do the job…
Classic car technicians Monty and Christian have been spending quite a bit of time with our 1975 Jensen Interceptor MK3 lately. From removing the front wings to working on the new body panels that arrived at the workshop, they have…
Classic car technicians Monty and Christian have taken the front wings off of our 1975 Jensen Interceptor MK3 to make way for the new ones to be fitted at a later date. They made sure everything was done accurately and…
To get our 1975 Jensen Interceptor MK3 back on the road, some new body panels were needed. We now have these and they will soon be fitted to the car as it continues to move through its restoration journey. We…
The bodyshell of the 1975 Jensen Interceptor Mk3 has arrived back at our restoration workshops after being sent away for ProStripping. After a series of chemical treatments, the bodyshell has been stripped off all loose corrosion and any fillers or…
Our Jensen Interceptor has returned having been chemically dipped. It was sent to Pro-Strip. The car arrived with us a few weeks ago completely stripped as a stalled restoration. We will now embark of the re-installation of all metalwork to…
The 1975 Jensen Interceptor Mk3 is in the Bridge Classic Cars workshops at our Pettistree HQ for body and paintwork. The fabricator and restoration teams have been working together in order to strip apart and teardown the shell of the…
Bridge Classic Cars will soon be welcoming this 1975 Jensen Interceptor Mk3 for an aesthetic restoration by our in-house teams. Our paint and body teams will assess and report on the condition of the classic GT car which will then…