Classic car technician Rob has, once again, been working on our 1960 Jensen 541R. One of the areas he has been focused on is the right-hand side rear body frame and B post. These were both made and welded into place. Rob then went on to repair and weld the front bulkhead and A posts […]
Classic car technician Rob has continued his work on our 1960 Jensen 541R. Rob has made new door steps and fitted these. He has also made the left-hand B post and welded this in before doing the same for the left-hand rear body frame parts. The rear floor mounting panels were replaced too.
Our 1960 Jensen 541R has stayed under the care of classic car technician Rob. Rob continued his work making and welding panels for the right-hand rear wheel arch. Once this was finished, he began the process all over again on the left-hand side of the chassis. This involved more cutting and welding. Like the right-hand […]
Since the chassis of our 1960 Jensen 541R has returned from sandblasting, classic car technician Rob has found some old repairs that need to be cut out and corrected. These repairs have clearly been done at some point in the car’s life before it found its way into the Bridge Classic Cars workshop. Now that […]
The chassis and body of our 1960 Jensen 541R has come back to the Bridge Classic Cars workshop after their trip to the sandblasters. Now they are back with us, the restoration of our 1960 Jensen 541R can continue.
Our 1960 Jensen 541 is back in the workshop and in the very capable hands of classic car technician Rob. In preparation for sandblasting, Rob has removed the body and the roof frame. With a history like this car has, it is exciting to see it progress through its restoration journey and be one step […]
Our friends at Wyatt Polishing recently completed some restoration work and zinc plating for a number of seat runners and bonnet struts for the Jensens currently in the Bridge Classic Cars workshop. When components like this look as good as they now do, you can tell that the fully restored cars they become a part […]
Our classic car technician, Clinton, has been making parts that will ultimately go on to be fitted into one of our ongoing Jensen projects. The bonnet strips he made can be seen in the photos below.
The Jensen 541 was a car produced by Jensen Motors. Each one of these cars has an individual story to tell, but the story of the Jensen 541, in general, is one that many car enthusiasts should be keen to hear. If you want to know more about these truly iconic classic cars, then this […]
There are quite a few Jensens being restored in our workshop at the moment (7 at the last count including 541s, 541Rs, and an Interceptor MK3). As there is a lot of work to get done on these classic cars, it’s usually very beneficial to bulk produce some of the smaller parts so they are […]
In the workshops right now, we have 6x Jensen 541’s in various states of repair or restoration. We have 3x Jensen 541’s and 3x Jensen 541R’s. Sometimes, when fabricating parts it is much more time and cost effective for Clinton to produce more than one item. In this instance, Clinton has been working on re-producing […]
Mauro spent the afternoon in the booth preparing parts for a number of our Jensen projects. Blasted parts have been prepared and painted and will now be wrapped up ready for reassembly.
The subframe from the 1960 Jensen 541R has arrived back at the Bridge Classic Cars workshop after being sent away for blasting. The team sent away the subframe for blasting to get a better look at the condition of the piece. Once it arrived back, the team have noticed that several of the mounts and […]
Local artist Paul Seymour has sent us in this beautiful watercolour painting of our 1959 Jensen 541R that he sketched at our stand at this years Helmingham Hall Classic & Sports Car Festival. We brought along the 541R which is in the early stages of its restoration with us. We’ve even got some photos of […]
The Bridge Classic Cars team are currently in the process of stripping back and inspecting the chassis for our 1960 Jensen 541R, Lilac. The team have been looking into the depth of any corrosion and also to the extent of previous repairs to the chassis which will need to be rectified and corrected by the […]
Work is continuing on the interior of this in-house handmade interior of the 1960 Jensen 541R we have in with us for restoration at Bridge Classic Cars. This entirely bespoke and fitted interior being made by our in-house trim shop shows the level of detail needed for such a unique and classic car. The foams […]
For a handmade classic car, only a handmade interior will do. This is much the story with our beautiful 1960 Jensen 541R we have in the trim shop here at Bridge Classic Cars for one of the incredible owners, Gordon. Our beloved Lilac has been in the trim shop recently to have our in-house trim […]
Brian has been working on the interior for the Lilac Jensen 541R recently. He is currently gluing the front cover to front seat base tub in these pictures. The original and very first owner certainly hoped to make a very bold statement. This car left the Jensen factory finished in Lilac with white interior so […]
In the trim shop, Brian has been fitting the front squab seats of the 1960 Jensen 541R to their foams and frames. These seats were created and sewn by Lydia a little while back. You can read about the process here and here. Brian started the fitting process by glueing and stapling the front squab […]
It is lovely to receive a copy of the Zomer 2021 Jensen Journaal in the post this week. Several of our Jensens that we have restored have been featured in this month’s copy of the Dutch magazine, Jensen Journaal! https://jensenholland.nl/ It’s an absolute privilege, so thank you. The magazine talks about our 1957 Jensen 541R, […]
We call it the Jensen bible and in order to protect it Kath has made a bespoke leather book bag. Jensen Genome Richard Calver July 2019 Edition She started the process by drawing, measuring and working out the dimensions and design for the bag. Black leather was cut out to the required shapes and measurements […]
Our soon to be Lilac Jensen is currently sat in our workshop awaiting its next stage.
The marketing team went up with Workshop manager, John last week to photograph the two Jensen’s that have just left us. Whilst Ellie shot the main visuals, Freddie worked on a behind the scenes video. The final photos, shown below, have been sent on to the client and will feature online.
Our 1960 Jensen 541R is undergoing some fibreglass repair in our paint shop. Matt is currently working on the boot lid that needs to be repaired with filler, shaped up and smoothed down.
Lydia has been working on the 1960 Lilac Jensen that our director, Gordon, is having restored. She has perforated the leather which arrived and then made fluted faces for the front squab and base seats with it. Then, she marked out the lines on the back of the leather and onto scrim foam to use […]
Ady has taken apart the lilac 1960 Jensen’s rocker shaft to be cleaned out and rebuilt to ensure it works as it should. Brian has been gluing foam onto the front face of the rear quarter seat panels. He then stapled the cover to the top of the wood and glued the cover down over […]
Lydia has been working on the interior of the 1960 Jensen 541R which is Gordons restoration project and is fondly referred to as the Lilac Jensen as that’s the colour he’s chosen for the paintwork. Lydia has made the second front seat backboard. First, she started by glueing white leather to the millboard, creating the […]
Our Jensen 541R restoration project, currently owned by our director, Gordon, is currently getting new seats made by our trim shop. Most recently the tubs have been stripped to be recovered. All the old rails have been removed and old patterns have been measured up next to the tubs to see if they fit or […]
Recovering the rear side panels and rear side window surrounds included cutting out dark blue leather to cover the wood and glueing them to the front of the wood followed by wrapping around the underneath, trimming to shape and glueing down. Making the new sideboards on the front squab seats for the Jensen included sewing […]
Ady has almost completed fitting the engine back together after its full re-build, part of which was done here and part of which was done at Scholar. The engine was originally stripped down and inspected for issues when Ady found that the engine needed to be re-bored to suit new pistons. The crankshaft was also […]