Search
Close this search box.
My Account
My Account

1956 Jensen 541

Better than New – New Chassis and Bulkhead for the 1956 Jensen 541

February 28, 2022

A brand new chassis for the 1956 Jensen 541 is under construction. Part of this also involves a very special bulkhead to covert the car to left-hand drive.

The estimated completion of the chassis is about 4 weeks. We will then be into reassembly. The car will be finished Deep Carriage Green with Burgundy upholstery.

After completing numerous restorations and recommissions of the Jensen 541, this will be the first left-hand drive car to be completed by our workshop.

In-Place – New Wheel Arches for the 1956 Jensen 541

February 24, 2022

The handmade wheel arches for the 1956 Jensen 541 have been into the Bridge Classic Cars to be finished in shiny new black epoxy.

The paint team prepared and painted the arches for when the car is ready to be reassembled.

Remade – New Aluminium Wheel Arches and Boot Lid Stripped for the 1956 Jensen 541

February 22, 2022

The Bridge Classic Cars body shop have the wheels arches of the 1956 Jensen 541 on the workbench currently.

Our body shop have been forming the new aluminium wheel arch lines by hand for the classic sports car. All of these pieces have to be made by hand for the car due to each arch being slightly different to one another, so for the best fit, our team have made them individually for the car.

Along with that, our teams have finished stripping back the boot lid of the 541 ready for primer and filler work to be completed and ready for paint.

The Smallest Details – Repainting Parts for the 1956 Jensen 541

February 18, 2022

The paint team at Bridge Classic Cars have had some of the parts and pieces from the 1956 Jensen 541 in the paint booth.

With the restoration of the 1956 Jensen 541 moving ahead with the body panels and pieces being worked on by our paint and body teams, it was the turn of some of the parts to go into our in-house paint booth to be refinished in heavy-duty black and looking as good as new.

The pieces for this restoration will be going into the booth in various stages in preparation for the final assembly of the car but until then they will be wrapped up and put into storage after being catalogued.

Bodywork – Prepping the Doors, Boot and Quarter Panels of the 1956 Jensen 541

February 17, 2022

The 1956 Jensen 541 in the Bridge Classic Cars workshop at our Suffolk HQ has been being prepared bit by bit in the paint and body shop.

The doors, boot and quarter panels have all been carefully stripped back and prepared. Some of those parts have gone into our paint shop to have their first layers of primer put onto the panels. These pieces will then go back into the body shop to be refined and perfected.

A Delicate Process – Preparing and Repairing the Wheel Arches of the 1956 Jensen 541

February 10, 2022

The in-house paint and body team at Bridge Classic Cars have been working on preparing to start work on the 1956 Jensen 541.

The first stage is to get the wheel arches for the car sanded down and ready for when they eventually go into the paint booth. First, though, the team had to perform some repairs. One of the benefits of the Jensen 541’s fibreglass construction is that repairs can be easily performed on these amazing classic GT cars.

Then, once the resin had cured for the repair the team could begin sanding and fairing the pieces to make sure every surface and recess of it is perfect and ready for the time when it all gets its first coats of primer.

The Smallest of Details – Refurbishing 1956 Jensen 541 Parts

February 9, 2022

Our in-house restoration team at Bridge Classic Cars put the same level of skill and finish for even the smallest parts of our restoration projects. Applying the same high standards to things such as nuts and bolts as we do to a complete car.

Take for example these pieces for the 1956 Jensen 541 which is in with ourselves for full restoration. When people say a full ”Nut and Bolt” restoration, this is what Bridge Classic Cars means. Jonn, one of our amazing technicians, spent a considerable amount of time getting the nuts and bolts for the suspension components, pedal box etc all in the best condition.

Jonn, cleaned off the years of corrosion on each piece. Regreased every joint and either cleaned or rethreaded any bolts. Meticulously working his way through each piece part by part.

That is how Bridge Classic Cars does a restoration.

Rearward – Fitting Up the New Rear Seat Cover to the Base of the 1956 Jensen 541

January 14, 2022

The Bridge Classic Cars in-house trim shop has made every piece of the interior for our Jensen 541’s by hand. And the 1956 Jensen 541 we have in for restoration is the next car in that line of bespoke interiors.

Brian and Lydia have been working together to get the rear seat finished for this amazing project. In the last update, Lydia had finished making the new seat cover entirely by hand and bespoke for this particular car. Now, Brian has made the new seat base and foams for the car. Again, these are unique and bespoke for the car to ensure the best fit and finish for the final product.

The interior of this particular 1956 Jensen 541 is going to look absolutely phenomenal when it’s finished and we cannot wait to show you.

The Perfect Fit – Making the Rear Seat Cover for the 1956 Jensen 541

January 13, 2022

Our in-house trim expert Lydia has been busy remaking the rear seat for the 1956 Jensen 541 that we are currently in the process of restoring at Bridge Classic Cars.

Lydia used what was left of the original rear seat as a rough guide to create a specially made template for the classic GT car. Carefully, Lydia could transfer this template onto the chosen leather to begin the process of cutting out the individual pieces that will be joined together, edged and then fitted around the seat base.

The attention to detail that our trim-shop have is what truly sets them apart in their field. Every aspect of the seat is taken into consideration when creating these custom pieces from scratch.

From Scratch – Making and Trimming Rear Quarters for the 1956 Jensen 541

December 20, 2021

Brian, one of our legendary in-house trim experts at Bridge Classic Cars, is a true master of his craft. Brian is currently working on the rear trim panels and pieces for the 1956 Jensen 541 being built by us here at Bridge Classic Cars. The interior is one of those pieces being handcrafted to fit the car.

The rear quarter pieces have been entirely made by hand by Brian. We have a long history of restoring Jensen 541’s to a world-class standard and part of that is the interiors our team create for these bespoke sportscars. Each piece for the interior of the ’56 has been made by hand by the team, whether it be the coverings or literally panels for the car like these rear quarter pieces.

Brian made these panels to perfectly fit into the car and also to work alongside the other pieces of trim which are going to be alongside them in the car. After hand forming them, Brian then cuts and wraps them by hand to ensure the best possible fit and finish to each piece for such a special car.

Got Your Back – Working on the Seats of the 1956 Jensen 541

December 15, 2021

Our in-house trim shop at Bridge Classic Cars are well versed with the interiors of the majestic Jensen 541. So, with the fronts of the 1956 Jensen 541 seats complete, it was time for Kath to turn her attention to the back of the other seat.

Using the other completed seat for reference, Kath began by carefully making a template of the back of the seat. Each of the seat buckets was made by hand back in the 1950s so they are slightly different from one to the next, so to ensure the best fit and finish Kath makes each template by hand. Once this was complete, she could begin to transfer the template onto the lining and the hide that would envelop the fibreglass seat.

After this had been carefully glued and set to the backs and bottom of the seat, Kath began to work on the seat base and cushion. Again, every single piece of the seat is handmade by our in-house trim shop so even the cushions are bespoke to this car. Millimetre by millimetre, Kath perfected the fit and shape of the foam and once that was fair and even, she attached it to the seat base. Then, in the matching hide, Kath retrimmed the cushion and seat base ready to put into the seat.

With this complete, both seats are now ready for when the rest of the car is finished and handed over to the trim shop for fitting.

Core Components – Stripping Parts for the 1956 Jensen 541 to be Refurbished

December 8, 2021

Mauro, has been working on getting all the relevant parts and pieces of the 1956 Jensen 541 ready to be sent out to local, trusted specialists for refurbishment.

Bridge Classic Cars have a long history of restoring Jensen 541’s to a very high standard and this 1956 541 is to be no exception. The pieces of the car have been carefully dismantled down to their core components and assessed for condition and originality. Where possible, we try to keep the cars as original as possible but refinished and restored to go back on the car.

The pieces here have also been catalogued and photographed for record as well as detailed records of them being dismantled so that everything and their construction method is accounted for. Each component is dealt with individually to ensure that it safely comes apart and if not, can be taken apart and repaired to the exacting standards that Bridge Classic Cars holds its restorations to.

Soon, there will be more updates on the 1956 Jensen 541 during its restoration, so keep an eye out here on the Bridge Classic Cars news page.

To The Smallest Detail – Preparing Parts of the 1956 Jensen 541 For Sandblasting

December 3, 2021

The teardown of components for sandblasting is a crucial step in any restoration. The parts need to be broken down into the their separate pieces in order to be properly blasted and cleaned but also different attention is sometimes required to different materials. Another part of this is knowing the fixing and the parts are in good or rebuildable order before they are sent out.

That’s why Mauro, one of our in-house restoration technicians has been hard at work carefully taking apart each of the components which will be sent away of the 1956 Jensen 541 for sandblasting. With a car as bespoke and handbill as the 541, it is important to carefully remove and catalogue all pieces that come off the car for later when the rebuild begins. Also, for reference to know exactly what is being sent out. That is something Bridge Classic Cars prides itself on with our restorations, the level of detail.

Each component, piece by piece was gently and sympathetically broke down to its constituent parts in order to be fully assessed before being labeled and photographed. These pieces will be sent to a local specialist to treat and revitalise before being returned to us at Bridge Classic Cars for the Jensen. The process allows the fresh metal underneath to breathe but also for our restoration teams to assess any imperfections or hidden damage to the components when they arrive back. As you can see with the Jensen, there are lots of parts with even more small fixings and components so it is crucial with a restoration as in depth as that of the 1956 541 that everything is as good as it possibly can be.

Expect to see more on the 1956 Jensen 541 being restored at Bridge Classic Cars very soon here on the News page.

Refining Process – Making the Rear Quarter Trims for the 1956 Jensen 541

November 29, 2021

Brian, our in-house trim expert, has been continuing to work on the rear quarter trims for the 1956 Jensen 541 currently in at Bridge Classic Cars for restoration.

Brian has completely fabricated each of the trim pieces by hand for the 541 using what was left of the originals. Piece by piece, Brian used the original techniques to recreate the trim panels which will then go on to be retrimmed in matching vibrant red leather to the rest of the car.

Each of the pieces has been hand cut and sanded to be a perfect fit when installed into the car. Millimetre by millimetre, Brian removed material after dry fitting. Also, taking into account the foam covering and leather to ensure the best fit and finish possible for this incredible 1950s British sports car.

Carrying On – Continuing the Woodwork for the 1956 Jensen 541

November 26, 2021

Brian has been busy at work hand-crafting several pieces for the interior of the 1956 Jensen 541 that is being restored by Bridge Classic Cars.

Brian, one of our master in-house trim experts, has been using what is salvageable from the original interior as well as reference photos and experience to create the needed trim panels. Here, Brian is making new wooden pieces for interior cards of the 541 which will be foamed and then wrapped in the world-class hide to the customers choice of colour.

Brian took his time to carefully measure and template the pieces that are needed for the car. Then, he began to bring them to life for this stunning British sports car which is currently being restored by all of our restoration teams.

Application of Skill – Remaking the Rear Quarter Trims for the 1956 Jensen 541

November 25, 2021

Brian is a true master of his trade. What started as a series of rotten wooden pieces became brand new pieces for the 1956 Jensen 541 that is in at Bridge Classic Cars.

Using what was left of the original pieces, Brian began to strip back and assess each piece to see if it could be salvaged and reused in the car to preserve any form of originality. Inch by inch Brian has recreated the pieces for the rear quarter trims from almost thin air. Using ply for the wooden pieces underneath, Brian began to wrap and prepare the pieces for the leather trimming.

From Scratch – Making the Rear Seat for the 1956 Jensen 541

November 24, 2021

Brian has been continuing to work on the interior of the 1956 Jensen 541 that is here at Bridge Classic Cars for restoration.

This time, Brian has been skillfully making the new rear seat by hand. To ensure the best fit, our in-house trim shop finds it best to do these by hand in order to get the best possible finish for the car.

Starting from a single solid block of foam, Brian transferred the template and began to cut it down to size. Slowly refining the shape until it was as close to perfect as possible and then going that last little bit to get it 100% spot on. Brian then began fitting in the braces and extra padding that is needed once the cover has been made and fitted to fit properly.

The Level of Detail – Recovering the Dash and Ceiling Pad of the 1956 Jensen 541

November 23, 2021

It’s the small details on a restoration that we believe take it to a world-class finish. Interiors are a huge part of the experience of these cars for their very lucky owners as it’s the best seat in the house in our opinion. That’s why our in-house trim shop takes everything to the next level in terms of fit and finish.

Brian, one of our in-house trim experts here at Bridge Classic Cars, has been hard at work stripping down and recovering several of the larger components for the 1956 Jensen 541. Brian began by stripping back the original dash and ceiling pads ready for them to be recovered in matching red leather to the rest of the interior. Carefully, Brian worked his magic on revealing the original piece that lay under the weathered coverings for assessment.

The pieces themselves were in remarkable shape. So, very little was needed before they were prepared for their new look. Inch by inch, Brian began with the underlays for each piece making sure they were cut perfectly to size before being married to the piece. Then, using the best hide, Brian began the process that would make them complete.

Using his years of experience in high-end retrimming, Brian stretch and secured the leather to the piece making sure at each point that the coverings sat flat and straight onto the original 1950s pieces. As you can see, the results are sensational just like the rest of the interior on this wonderful early car.

Final Piece of the Puzzle – Finish the Seat Base of the 1956 Jensen 541

November 18, 2021

Kath, one of our absolutely incredible trim team, has been working on the seat of the 1956 Jensen 541 that is at Bridge Classic Cars to be restored for an amazing customer of ours.

Last time you saw Kath finishing the back of the fibreglass bucket seat. Now, it’s time for the final piece of the puzzle. The seat base. Much like the bolsters and the back, the base has been entirely handmade for the individual seat. This way Kath can ensure that it has a perfect fit and sits beautifully in the seat as a whole.

Kath hand formed the foam padding to match each and every curve of the seat. Once she was happy with the shape, it was a case of beginning to make the cover. Finished in matching deep red leather with red piping. It looks absolutely phenomenal. Each piece of the seat base was test fit to the seat itself at every stage to make sure the final fit and finish were perfect.

And as you can see by the final result, it looks absolutely stunning.

Front to Back – Making the Seat Backs for the 1956 Jensen 541

November 17, 2021

Kath, one of our amazing in-house trim experts, has been working on the seats for the 1956 Jensen 541 that is currently in with Bridge Classic Cars for a full restoration.

Last we saw Kath working her skill on the front of the seats, creating new padding and covers for the fibreglass buckets. Now, Kath is applying the same level of attention and detail to the back of the seats. Methodically, Kath has used traditional techniques to carefully remake the seatbacks in matching red leather.

The base of the seat has also been lined in preparation for the base padding which is currently being worked on by the Bridge Classic Cars in-house trim team.

Refined – Retrimming the Seats of the 1956 Jensen 541

November 11, 2021

The Jensen 541 interiors are special. Each one entirely handmade with the best materials, all crafted and fitted by hand as it would have traditionally been done back at the factory. Kath, our in-house trim expert here at Bridge Classic Cars, has been working on retrimming the front seats of the 1956 Jensen 541.

Those who have been following along will have seen the condition the seats originally came out of the car like. The foam and covering had all but rotted away to dust but the shells were in good condition and reusable. Kath and the trim team refurbished the shells and made brand newly fitted foams to sit inside the fibreglass buckets.

Now, it was time to trim them. On one of the original seat base was a tiny piece of the original leather. A dark, crimson red. This was the colour that was decided on, to be put back to original specification. Kath carefully matched the materials closest to the original colour to be sent to the owner for selection. Once that was decided on, Kath then began the process of getting the coverings cut to shape and fitted. Each piece was templated and the appropriate swatch of material was selected and cut for the job. Using adhesive, gentle heat and small stretching techniques Kath managed to get the covers in place.

The results are incredible. A wonderful testament to not only the skill and craftsmanship of our in-house trim team but to the timeless design of the 541.

New Beginnings – Brightwork Off for Refinishing on the 1969 Jensen 541

November 10, 2021

A crucial part of classic sportscars is it’s brightwork. An instantly recognisable symbol for elegance and style, chromework is the cornerstone of a finished classic.

So it’s time to send off all the pieces from our 1956 Jensen 541 that is currently undergoing restoration here at Bridge Classic Cars. These pieces will be sent off to a local specialist to be refinished, polished and cured before being bought back to our workshop and stored ready for when the car is in final assembly.

There will be more on this fantastic project here on the Bridge Classic Cars blog soon.

Down to the Bare Bones – Teardown on the 1956 Jensen 541

October 6, 2021

Here at Bridge Classic Cars, we’ve built a reputation for being one of the leaders in the restoration of the Jensen 541 family. The latest of these that is just beginning its journey is this 1956 Jensen 541.

This car came to us as a semi barn-find. After pulling it into the workshop, our in-house restoration technician Scott began to separate all the associate parts that were left inside the shell. This is an important part of any ground-up restoration as it gives you a clear view of what is going to be needed and its availability.

With the body and chassis of the Jensen, Scott has been going through to assess what parts can be refurbished and what will need to have replacements made. Carefully Scott has been removing, cataloguing and storing the various fixings and components which can be fully inspected at a later date by our in-house restoration teams.

Expect to see more about the restoration of this 1956 Jensen 541 on our Blog very soon.

Awoken From its Slumber – Collecting the 1956 Jensen 541

October 4, 2021

That’s our 1956 Jensen 541 safely in our enclosed transporter and on its way back to the Bridge Classic Cars workshop in Pettistree.

It had been sat for quite a while awaiting its place in line for restoration. Our transport team carefully positioned the enclosed trailer up to the front of the sleeping sportscar. Inch by inch the car was tenderly pulled from the storage unit to keep it and the building around it safe.

With the car and all other parts securely stored and the area cleaned up, it was on its way to the workshop to begin teardown in preparation for its full restoration.

Starting Over – Dismantling and Rebuilding the Interior of the 1956 Jensen 541

September 24, 2021

This is a perfect example of the level our in-house trim experts at Bridge Classic Cars work to.

The first photo shows what was left of the rear seat of the 1956 Jensen 541. There wasn’t a lot left after years of uncovered storage. But, thankfully our in-house teams could disassemble the old seat to then reverse engineer the piece.

Kath and Brian managed to completely recreate the wooden base piece by piece using the same techniques as the original trimmers. Once the wooden base had been built up and fixed together, it was time to start hand shaping the foam.

The foams of the seats have to be hand faired to make sure it flows perfectly once the covers are made for this particular car. Being able to reference the previous 541 series interiors, our in-house trimmers got the shape of the foams spot on.

Next up for the interior of the 1956 Jensen 541 will be its interior colour choice and the trim team will begin to make its covers.

From a Solid Base – Creating the Foam Pieces for the Seats on a 1956 Jensen 541

September 23, 2021

Time for an update on the interior of the 1956 Jensen 541 we have here at Bridge Classic Cars.

In the last update on the interior of this particular 541, our in-house trim shop had stripped the original seats back down their bases to assess their condition. Also, the colour selection pallet had been proposed to this very lucky customer.

Now, with the seats back to the simplest form, our in-house trim specialist Kath could begin to form the bespoke foam-work that makes up the backrest and base cushion on these unique handbuilt sportscars.

Each component of the interior is entirely hand built by our in-house trim experts.

For more updates, keep a look out on our news page.

Decisions, Decisions… – Choosing the right colour for the interior of the 1956 Jensen 541

September 22, 2021

The choice of colour on a classic car interior is a big part of any restoration.

Do you try and match as closely to the original as possible or do you personalise and make it unique to your own taste? Tough call. But, our in-house trim shop team will do either request to a world-class level.

This is the stage that we are at with the restoration of the interior of the 1956 Jensen 541 at Bridge Classic Cars. With the volumes of swatches that we carry for our clients to choose from, you can have almost any combination imaginable and always to the highest level of fit and finish.

This Jensen is starting from the ground up with its interior. So, while the choices are being made, Kath will be making the custom-fit handmade padding that will sit under whatever colour combination this very lucky client chooses.

Check-in on the News Page for more updates on this very exciting project.

Out with the Old – Interior Restoration on the 1956 Jensen 541

September 21, 2021

Work has begun on the interior of our incredible ”Barn Find” 1956 Jensen 541. As you can see, it’s not in the best condition but that’s not a problem for our incredible in-house trim shop.

The original interior unfortunately had succumbed to the passing of time. As you can see, there wasn’t much left after our in-house trim team began to pull it apart.

This interior will see the light of day again!

Be sure to keep an eye on our news page for more updates about this project very soon.

Jensen Journaal – July 2021

July 27, 2021

It is lovely to receive a copy of the Zomer 2021 Jensen Journaal in the post this week.

Several of our Jensens that we have restored have been featured in this month’s copy of the Dutch magazine, Jensen Journaal! https://jensenholland.nl/ It’s an absolute privilege, so thank you.

The magazine talks about our 1957 Jensen 541R, the 1958 Jensen 541R, the 1960 Jensen 541R and the 1960 Jensen 541S (The Prototype).

Here are our website links to the cars that were featured to find out more information on each of the restoration projects.

https://bridgeclassiccars.co.uk/category/projects/completed/1958-jensen-541r-navy/

https://bridgeclassiccars.co.uk/category/projects/completed/1957-jensen-541r/

https://bridgeclassiccars.co.uk/category/projects/completed/1960-jensen-541r-01/

https://bridgeclassiccars.co.uk/category/projects/completed/1960-jensen-541s/

Bridge Classic Cars are award winning Classic Car Restoration and Maintenance specialists. Your pride and joy is in safe hands with our expert Classic Car Technicians. Take a look at our awards here.

As seen on
As seen on the Daily Mail
© Bridge Classic Cars Holdings Ltd, T/ as Bridge Classic Cars. Registered in England and Wales with company number 5047706.