News

Aston Martin’s noisy bits

Mauro has been doing a little work on our 2005 Aston Martin DB 9. The panel that went from the rear seats to the parcel shelf in the middle was rattling so he took it all apart and adjusted the metal bracket that holds it in place.

Launching today – 1988 Ford Escort Cabriolet

Launching today is this 1988 blue Ford Escort 1600 Cabriolet! The Ford Escort was originally produced as a small family car, manufactured from 1968 to 2003. There were six different model variations throughout its time and this is the fourth one. It’s instantly recognisable as an updated version of the previous model, taking styling cues […]

Uncovering questionable repairs on Aston Martin DB2/4

Up to now, our 1955 Aston Martin DB2/4 was not uncovering too many hidden issues. Naturally, we had a lot of repairs and re-shaping to do but nothing too scary. Having carried out a full bare metal strip down of the car Clinton has uncovered some very questionable repairs that have been done at some […]

Daytona back in the workshop!

This week we’ve welcomed the 1979 Arrow Ferrari Daytona back into the workshop after it’s been in storage for a little bit of time. The last time it was in here was back in March when the body had just been painted and the seats had finished being re-upholstered. You can read about its progress […]

Completion of the Stag!

The 1973 Triumph Stag has now come to its completion stage! It’s had quite the journey! You can read in full detail about all the work that was done to it here. In March this year, the journey began with the interior restoration. The seats were all stripped apart and the frames were given a […]

Final stage of work for the MG Midget!

After Scott’s repair work on the offside sill of the blaze orange 1979 MG Midget, the car has since been taken into the paint shop where it had the sills re-painted and the underneath was sealed. This car was a competition car, back on the 26th of July, and we’ll be delivering it to its […]

Clinton Continues DB2/4 Fabrication

We check in to our DB2/4 restoration as Clinton is finalising the bonnet fabrication. Clinton has fabricated brand new hinges and completely reshaped the lower bumper moulding, letting in fresh metal when neccaasary. ‘The car can warp over time, so what may be a very small warpage has a knock-on effect and can result in […]

Front frame sanding.

Lydia has been sanding down the primer on the front frame for the 1973 Jaguar E-Type Series 3. This was simply done with 500-grade soft sanding pads all over. This is all prep for the final coat of paint!

This Friday, don’t forget!

This Friday, the 6th of August, is the draw for our competition to win a gold 1981 Rover 3500 SD1 Vanden Plas! For your chance to enter, simply click here! Where you’ll also be able to find out more information about the car.

The story of the missing winner!

Today we delivered this maroon 1959 Jaguar Mk I to its rightful winner! The draw for this car was held last Sunday at the annual Helmingham Hall Festival of Classic and Sports Cars. This has a bit of story that goes with it! The winner was actually at the event but we couldn’t track him […]

Dash tray work on the Aston.

Brian has been continuing the interior trim work for the 1955 Aston Martin DB 2/4. This time, he’s been working on a pair of dash trays and a pair of under dash panels. For the dash trays, Brian started the process by taking off the rubber lip that went around the hole, then took off […]

Pressure testing the Jaguar Mk VII engine

Ady has taken a trip up the road to Coltec Racing to pressure test the Jaguar Mk VII engine. During pressure testing all-bar-one of the outlets are blanked off and then compressed air is fed into the open port on the inlet manifold, this way we can find if the cylinder head is leaking. It […]

More priming for the E-Type!

The 1973 Jaguar E-Type Roadster Series 3 has had another layer of primer sprayed on. This comes after sanding and repair work was done to the car last week. The body of the car and the doors were primed on this occasion.

Continuing prep work for the Honda.

Chris and Lydia have been continuing their work on the 1998 Honda Integra Type R in the paint shop. As before, Chris has been spraying primer onto various panels from the car, including the front and rear bumpers, the sills, the registration plate panel, the spoiler and the wings. Lydia has then been sanding down […]

Progress on Aston Martin panels!

Brian has been re-covering more panels for the 1955 Aston Martin DB 2/4. This time it’s been the lower A posts, the dash side panels, the rear seat front rail and the boot side panels. He took the original leather off all of them and cleaned off any old glue that was left behind. He […]

Engine re-paint for the purple MG B GT!

Chris has been re-painting the engine for the 1973 purple MG B GT V8. He painted the engine in sections, masking up along the way with tape.

Small repair on the Honda Integra.

James has been working on the 1998 Honda Integra Type R. He’s repaired a section on the lower quarter panel by fabricating and welding. It’s now ready to be re-fitted back onto the car.

Engine out for the Pagoda!

Paul has successfully removed the engine from our beautiful blue 1969 Mercedes 280SL Pagoda. The engine will be rebuilt by Ady and the engine bay will be detailed as part of the project. Apart from a couple of small paint imperfections the engine bay is very good order so a really good clean followed by […]

Small adjustment for the red Jensen!

Kath has been laying the carpet back down in the peony red 1960 Jensen 541S. The pedals needed some adjustment, so the sound deadening and carpet were glued back down after this was done.

Finishing the Vanden Plas headlining!

Brian has been finishing the headlining fitting for the 1981 Rover SD1 Vanden Plas. In this last post about it, you can see that he was glueing in the sunroof section. https://bridgeclassiccars.co.uk/headlining-work-continues-for-the-vanden-plas/ The board with the main piece of headlining on slid in from the back of the car. Brian had to take out the […]

Finishing the front squabs for the Aston!

Kath has been finishing up the fitting of the front squab seat covers for the 1955 Aston Martin DB 2/4. At the end of last week, she completed the first front squab, which can be read about here. https://bridgeclassiccars.co.uk/the-start-of-the-aston-martin-seat-fitting/ It was exactly the same process for this second front squab seat.

Charlotte takes you on a tour of the Hangar

With our VW Golf GTI and Rover 3500 SD1 draws coming up very soon, Charlotte takes you on a tour of the current collection we have in the Hangar. Good luck for this Friday if you’re in the draw!

Exotic Cars Of East Anglia – August 2021

Thanks to Exotic Cars Of East Anglia for sharing our 1983 VW Golf GTI competition.

1979 MG Midget 1500 repair work

Back on the 26th July 2021 Coby Morton received the amazing news that he has won our 1979 MG Midget 1500. When carrying out the Pre Delivery Inspection checks in our workshops we discovered a small area of corrosion that needed to be repaired. Scott got to work immediately cutting out the area of interest […]

Bridge Classic Cars at the 2021 Helmingham Hall Festival of Classic and Sports Cars

What a weekend! Now we’re back at base, it’s time for a re-cap of another classic car-fueled weekend. After a canceled 2020 show, Helmingham hall played backdrop for a wonderful show. Charlotte and the Bridge team were all at the show to present our restoration projects and current competition lineup. We even closed out the […]

Headline act – 1990 BMW E32 750il

A possible future project for us at Bridge Classic Cars may be our 1990 BMW E32 750 il with a droopy headlining. A common problem with classics and modern classics is the headlining starting to droop. A few factors that can cause this to happen is direct sunlight and in particular the heat that is […]

Work on the Jaguar E-Type Series 1.5!

Scott has been working on the 1968 Jaguar E-Type Series 1.5 4.2. He’s replaced the brake line that connects to the rear axle, bled the brakes, the bushes have been replaced in the steering column, because they were worn out, he’s lock wired any bolts that needed to be, fitted a new radio and replaced […]

Getting busy with the 1975 Triumph!

Dave has been carrying out work on the 1975 magenta Triumph TR6. Here’s a list and a look at what he’s been up to! There were problems with the horn so a new plate was ordered, the earth coil needs re-instating, replaced the fuel filter in the boot, the pipe got replaced, the fuel was […]

Bentley dash panels get a new lease of life!

Brian has been re-covering more panels for the 1963 Bentley S3 Chinese Continental. This time, he’s done the panels that go underneath the dash, the dash rail panel, corner panel, the metal plate that goes with it, padded dash panels, and front-seat support wood. He stripped the original leather off all of them, and any […]

More stages of the prep work for the Honda Integra!

Lydia has been helping Chris in the paint shop with the 1998 Honda Integra Type R panels. Chris has been priming them, and then Lydia has been coating them in black guide coat, which shows the imperfections in the primer surface when sanded down. She sanded each panel down until no guide coat could be […]