News

Running Rough – Running Issue on a 1964 Morgan 4/4

This beautiful 1964 Morgan 4/4 has been in with us at Bridge Classic Cars for a couple of issues.

Most notably is the rough running from the 1600cc engine. After inspection, our in-house technician Ady discovered there was an issue with the manifold that was causing the exhaust to blow and therefore the engine to run poorly.

With this information, we managed to source a replacement manifold for the car and fit it. However, the replacement manifold didn’t quite line up with the threaded hole on the cylinder head. So, carefully Ady elongated the holes to allow it to bolt up while also keeping the gaskets perfectly in place to achieve the correct seal.

After this had been done and the manifold connected back up to the exhaust system. Our in-house team went through the entire system from engine to exhaust box to check everything was working exactly as it should on the Morgan.

WEโ€™VE BEEN EXPECTING YOU MR BOND โ€“ THE BRIDGE CLASSIC CARS 007 SPECIAL โ€“ BMW Z3

As the 1990s saw Bond change yet again into the modern world, this time it would be portrayed by another iconic actor. Pierce Brosnan would begin his career for MI6 in the 1995 film Goldeneye.

This film’s most famous Bond Car was actually a Russian T37 tank but towards the end of the film, the audience was given a glimpse of a new age of Bond. The BMW era.

Before the production of Goldeneye, EON productions had signed a 3 film deal with the Bavarian manufacturer to supply Bond with his own modes of transport. The first being the brand new Z3.

Bond’s specific Z3 in Goldeneye was a 1.9 litre 1996 model which most famously appears on an airstrip in Cuba. The car in the film has been thoroughly gone through by Q-Branch, offering Bond ”the usual refinements” which can be best demonstrated in the lab during the walk around with Q (played by Desmond Llewelyn. It is apparently equipped with Stinger missiles behind each of the Z3’s headlights, a parachute deployed from the boot and radar displayed on an LCD screen inside the dash. There is a mention of an Ejector seat though… as well as a self-destruct system. References to earlier Bond cars from the franchise.

The Z3 in Goldeneye, which holds the title as the first non-British Bond car to ever be officially issued to him by Q Branch, was only a brief appearance. Because it was traded on the airstrip in Cuba for a plane (where it’s then seen fishtailing off into the trees with its new owner CIA Jack Wade at the helm) it also holds the title as one of only a handful of Bond cars that are not destroyed on screen. Even the DB5 doesn’t hold that accolade.

The Z3 had some serious kudos with potential owners after the launch of the film. The first year of production had sold out before the first cars had even been finished. But, some audiences felt the Z3 should have been given more of a role in the film considering the armaments bestowed on it by Q-Branch. for that they would have to wait until the release of The World is Not Enough a few years later with another BMW as Bond’s car of choice.

So, this concludes the end of our series on notable James Bond 007 Cars that we here at Bridge Classic Cars have had experience dealing with.

But there is still one more… Check in tonight to find out how you could have the chance of owning one!

On Its Way – South African Sunbeam Rapier

Some of our cars come from further afield than others. Take for instance this lovely Sunbeam Rapier.

Now you might be able to tell by the photos that this car isn’t coming in from the UK. This car has actually called the continent of Africa home for its life. Specifically South Africa.

It will be coming into us to be assessed and have its new home here in the UK. Recently this car has done an epic 1800km road trip from Johannesburg to Pringle Bay with its owner. The car itself had been restored by Rapier expert Barney Curtis before his passing.

The owner in South Africa wrote a wonderful piece in the Summer 2019 edition of Cut & Thrust about this road trip and the most important thing we took away from it was that it never skipped a beat thanks to the work done by Barney Curtis.

Expect to see more on this Sunbeam when it arrived with us later on.

Safe & Sound – Preparing the 1955 Aston Martin DB2/4 for Paint

The 1955 Aston Martin DB2/4 MkI is a perfect example of the sportscar built under the supervision of David Brown during his time as the head of Aston Martin.

This particular Aston Martin DB2/4 is in at Bridge Classic Cars for a full restoration. Recently it has been worked on by our master fabricator Clinton to make sure that all the metalwork throughout the cars body and frame is in the best shape before the next stage for the car. Now, it’s time to start dismantling and cataloguing the front and rear suspension assemblies plus the steering system. Our technician Mauro meticulously worked his way through each system carefully noting down the position of anything that has an adjustment so when it comes time to reassemble the DB2/4 it can be back in the same position it was taken off in.

You may have seen last time that some of the parts which had been prepared by our technician Lydia went into be primed in our in-house paint shop. Very soon, it will be the turn of this stunning ’50s GT sportscar to enter the booth for our masterful paint team to get it looking absolutely perfect.

Check-in very soon on the blog page for more updates on the DB2/4

No Time to Die – Bridge Classic Cars at 007 No Time to Die Premiere

The names Cars. Bridge Classic Cars.

Our very own Charlotte was at the Premiere of the latest James Bond 007 film in London this week (she won’t tell us anything about what happens)! It’s only a couple of days before it’s released to the public and we all cannot wait.

Are you going to go and watch it? Head down to your local cinema to enjoy this icon of cinema.

The Winners Circle – Delivery of the 2003 Vauxhall VX220 to its New Owners

Bridge Classic Cars Competitions got to deliver our 2003 Vauxhall VX220 to its lucky new owners today!

We delivered the car to Mr and Mrs Spellman, who actually have another VX220 as well as their new British Racing Green example! The other one however is having a bit of work done to it after a small incident on track. But now, Ian has got a replacement to enjoy while the other is being fixed.

Thanks to their winning ticket of 4851, the Spellmans now have many years to enjoy this amazing example of an underappreciated sportscar.

Dawn of a New Era – Recommissioning a 1973 MGB Roadster

All classics need some attention. They need to be checked, kept happy and kept running.

This 1973 MG B Roadster has come into us here at Bridge Classic Cars for just that. It is in to be recommissioned after laying dormant for a while.

Our technician Paul has begun work on getting this lovely, honest example of a true British sports car back on the road. To begin with, Paul stripped down the iconic twin-carburettors to make sure that the throaty 4 cylinder was getting all the air and fuel it needed.

With the carb refresh complete, it was a case of bolting them back up to the manifold to check the next part in the combustion cycle. The Spark.

To read more about that, check the News Page for updates very soon!

On the Inside – Working on the Interior of the 1973 Jaguar E Type Series 3 Roadster.

With such a bespoke and unique car as the 1973 Jaguar E Type Series 3 Roadster currently in at Bridge Classic Cars, only a handmade bespoke interior would suit.

Our master trim technician Kath has been working hard to get all the interior trim pieces for the E type stripped back to begin work on. Carefully she worked her way around each individual piece to preserve them for any templates that may need to be made for the car.

Some of the interior trim has metal components underneath the hides used originally. So, to make sure those pieces are in just as incredible shape as the body and chassis Kath worked on rust prevention for each piece and then finished in black.

Expect to see much more on Fern Grey very soon here on the blog.

We’ve Been Expecting You Mr Bond – The Bridge Classic Cars 007 Special – Lotus Esprit Turbo

As time went on, Bond as a character would change. The suave and sophisticated character of Connery would be replaced by several actors before we reach the 1980s with the release of For Your Eyes Only starring Roger Moore in 1981.

The 1977 film The Spy Who Loved Me, would see Bond driving another British motoring icon for the first time. A Lotus Espirit. Famously this one was more adept underwater than on land. But in 1981, Bond was back behind the wheel of Norfolks most famous export thanks to the success seen with the Esprit (known as Wet Nellie) in The Spy Who Loved Me.

The start of the film has a white Lotus Esprit Turbo in the Spanish countryside. When a wayward henchman of the man Bond is tracking decides to smash the window of the Espirit. It explodes. One of Q’s little additions to the car was self-destruction set up if the vehicle were to be tampered with. Thankfully, this car was actually a rolling shell. But for the driving sequences, a very early production car was used for the on-screen scenes. In the Film, Q’s workshop has managed to rebuild the blown up Lotus for the next time Bond would need it.

For Your Eyes Only most famously features a copper painted Lotus Esprit Turbo in a stunning backdrop of the Ski Resort of Cortina in Italy. Lotus had supplied two very early Esprit Turbos for production (10858 & 10930). So early in fact that the hero car, was actually a pre-production prototype (Chassis 10858). Both cars were delivered to production but when the location was decided on, the cars needed to be repainted. Both were finished light colours that didn’t contrast well enough against the white background of the location.

So, the cars were set back to Lotus’s headquarters of Hethel to be resprayed in the Copper Fire Metallic along with the Gold stripes and decals are seen on the cars used in the film. Whilst at Hethel, a pair of custom fabricated ski-racks were made for the Esprits to give that little bit extra cool to the cars on screen.

After filming had finished, both cars found their way to private owners after a long run of promotional duties. Chassis 10930 was actually held on to by Lotus until 1998 when it was sold at Auction. While the pre-production prototype went on to live life registered as 459 JTA with a private owner.

Apart from the Lotus, what is the other early Bond car that isn’t an Aston Martin?

First Steps – Priming Parts on the 1955 Aston Martin DB2/4

Previously, our in-house technician Lydia was busy preparing some components and pieces from the 1955 Aston Martin DB2/4 for paint.

Well, those parts have now had their first coats of primer sprayed after being carefully prepared by Lydia. Any form of corrosion whether it is surface or deeper was painstakingly assessed and rectified by our in-house body and paint teams. As you can see, the results are wonderful.

This however is not the final stage for these bits from the DB2/4. Keep a watch on our News Page for more updates on this project and others!

New Arrival – 1970 Dodge Charger

Just arrived at Bridge Classic Cars is this gorgeous 1970 Dodge Charger for interior fit out.

Expect to see more of this iconic second-generation Charger on our blog page!

Deep Dive – Working on the 1930 Packard Waterfield Convertible

This is indeed a wonderful example of 1930s excess and style. Almost industrial in its engineering but so ornate in its look. It is of course the 1930 Packard 740 Waterfield Convertible that is in at Bridge Classic Cars to have a list of jobs completed.

Thankfully, the customer supplied us with copies of the original technical manuals for the car for our technicians to work from. Scott, our in-house restoration technician, began to work on removing and adjusting the massive rear drums.

Of course with such a rare car, extreme care needed to be taken whilst removing any component from the car. As Scott gently prised the drum faces off to gain access to the shoes underneath, he carefully and methodically laid out each component that was removed from the Waterfield Convertible. Scott had noted that the drums felt a touch loose considering the size and weight of the vehicle, refering to the manual he found they did in fact need adjustment.

Once the rear brakes had been inspected, cleaned up and adjusted, Scott meticulously worked his way back to getting the drums back on this beautiful car.

At the same time as Scott was working at the rear of the Packard, John was going through his work list at the front. Carefully checking the operation of each light and noting any changes or anything untoward. The customer had made a note of the headlights not being too bright when being used. John investigated into this

We’ve Been Expecting You Mr Bond – The Bridge Classic Cars 007 Special – Aston Martin DB5

The Aston Martin DB5. Many believe it to be The Most Famous Car in the World. It’s claimed by some that over half the worlds population can tell you that James Bond, drives an Aston Martin.

The sleek, elegant lines of the DB5 made it a perfect candidate when the producers of the newly launched 007 franchise went looking for the latest car to be used by Her Majesty’s most faithful servant.

The DB5 would hit theatre screens in September of 1964, with the release of the 3rd James Bond Film, Goldfinger. This is where a now faithful audience would first catch sight of the car now known as the Goldfinger DB5.

Launched in 1963, the DB5 would serve as a replacement for the previous DB4. A long-legged, elegant GT car beloved by all and a favourite of the newly hip and happening. The DB5 used a Superleggera construction method. A sculpturesque spaceframe which keen-eyed craftsmen would then cloth in mirror-like, curvaceous panels. This appealed to the newly formed ”Q-Branch”.

At Pinewood, the designers had been working out what car should James Bond, the worlds most famous spy, drive. Ideas were bandied around a Jensen CV8, Jaguar E Type etc. But, only one car truly personified the style and the times of Flemings fictional spy. It was the DB5, with that the production the approached Aston Martin. The DB5 worked on another level as in the book Goldfinger, Bond was noted as driving an Aston Martin DB MkIII.

At first, Aston Martin was understandably hesitant at allowing their newest pride and joy to become a film star like any concerned parent would be. However, they did agree to sell two cars to the production team. The first was actually a DB5 Prototype, an earlier DB4 production car that had been modified to develop the DB5.

This prototype car would become the hero of the story. From the moment it arrived at the Pinewood workshop, the DB5 was busily modified to accept the growing list of gadgets being added to the script. For interest, in the book, the only mention of a gadget and an Aston Martin was a passage describing a smokescreen. But, for a film, it needed to get bolder and bolder.

Guy Hamilton, the film’s director, had the request which would now go down in history as one of the most memorable film lines of all time. His stepson had come to him one day and said he had seen an ejector seat in a film or a TV show. This sparked something in Hamilton. He took the idea to Production Designer Ken Adams and Engineer John Stears who said it might be possible but wouldn’t actually work, so when Connery says the famous line ” Ejector Seat? You must be joking.” Unfortunately, the crew were joking. The scene in the film was shot in multiple takes using careful angles and rigs to portray the henchmen’s unfriendly exit from the DB5. To this ever-expanding and extraordinary list, Hamilton added the revolving number plate mechanism. This famously came from Hamilton who was getting dozens of parking tickets issued against his car during production. Along with those, is the bulletproof rear screen plate and the oil hoses which drop out of the rear brake lights of the DB5.

This car (the second DB5 used for production was completely standard), was converted to become the stunt vehicle for Goldfinger. The whole conversion from DB5 prototype to The Worlds Most Famous car took a mind-blowing 6 weeks from the start of work to being delivered to set.

During both Goldfinger and lately Thunderball, the DB5s would use the number plates BMT 216A). Easily identifiable as the Goldfinger DB5s and also the number plate used on the recent DB5 Continuations known as The Goldfinger DB5s which have exact copies of the modifications to the stunt cars. These cars would then be unmodified in 1968 and sold to private owners.

But in 1995, the DB5 would return to the 007 James Bond series in the film GoldenEye. The DB5 breaks cover at the start of the film by going head to head against a Ferrari F355 GTS driven by assassin Xenia Onatopp. This particular DB5 in GoldenEye runs the registration BMT 214A. A nod to the original cars used in the earlier films. 11 years later, the DB5 would make its appearance in the first of the Daniel Craig era of James Bond with Casino Royale (the first of the Bond novels by Ian Fleming). However, this car according to Bond aficionados has nothing to do with the legendary BMT 216A. Seeing as how it’s a left-hand drive car and is wearing Bahamian numberplates.

For the world to see BMT 216A we would have to wait until 2012’s Skyfall. This is the car bond uses to escape back to his family home in Scotland. It’s also famously the film that gets destroyed out on a boggy crag. Thankfully, a series of scaled miniatures were used for this and no original DB5s were harmed during production. However, in the 007 film Spectre, the shell of the DB5 can be seen in Q’s workshop. With Bond raising a smile as he walks by his beloved DB5. Then at the end of the film, he is seen powering his way through Whitehall in London to a wonderful chorus of the 4 litre Straight-Six.

That brings the cinematic lineage of BMT 216A (the Goldfinger DB5) right up to the modern-day. In the latest film, No Time to Die, Bond is seen back behind the wheel of his Silver Birch DB5. This time, however, it is armed to the teeth. Machine guns behind the headlights but most interestingly is the faint outline of an ejector seat panel over the passenger seat… a clue perhaps? This car though is actually using the numberplate A426900, possibly one of the options from the original revolving idea Guy Hamilton proposed for the car back in 1964.

Famously though, in 1997 a very certain DB5 used during the production would make world news for its life away from the silver screen. In 1997, a DB5 known as The Road Car was being stored at an aircraft hanger belonging to its then owner in Boca Rotan, Florida. One night, however, the car disappeared. Sparking furious media debate worldwide as to where the car really is. Many believe the car to have had to have been destroyed due to its famous number. This car appeared in all of the press for the early films as well as cameo’s in multiple films such as Cannonball Run.

So, that brings all of us up to speed about the first Bond car. But, was it?

Back in the Booth – Painting the Quarter Panels and Roof on a 1998 Honda Integra Type R

Bridge Classic Cars have been working on a bit of a modern classic recently. This 1998 Honda Integra Type R has previously had a list of metal work done to it by our in-house body shop along with a full engine bay clean up and resprayed in its factory Championship White.

Now though, it is time for the back and the top of the car to receive the same treatment. The rear quarter panels needed some attention from the Bodyshop so to make sure it all looked as good if not better than the day it arrived on the showroom floor 23 years ago.

Our in-house paint expert Chris carefully prepared each panel to make sure the best results were achieved for our customer. The results are absolutely sensational.

The Winners Circle – Delivery of the 1974 Triumph GT6 to its New Owners

Congratulations to the winners of our Bridge Classic Cars Competitions 1974 Triumph GT6 who recently took delivery of this wonderful example of a Magenta GT6.

The GT6 was unloaded from our covered transporter in front of the house much to the excitement of John Waud, whose winning ticket of 153 made him its new owner.

We hope that he has many happy miles enjoying this iconic sportscar.

You could also win yourself an incredible classic too! Head over to our Competitions page to find out more.

All Present & Correct – Servicing the 1989 TVR SII 2.9 V6

Recently our technician Paul completed a full service and inspection on the 1989 TVR S2 2.9 V6 in at Bridge Classic Cars.

As part of all inspections, every part of the car was thoroughly checked not only for safety but also for any cosmetic issues that were present on this special 1980s sportscar. On his report, Paul had noted down that the rear shocks had a slight leak but also that one of the front indicator lenses had cracked. These were immediately ordered through our parts team so anyone driving it could have full confidence in the knowledge that nothing had been missed.

This particular 1989 TVR S2 2.9 V6 though has got a bit of a secret. And, if you want to find out then just click the link below and sign up for our mailing list to know about it before anyone else.

Sign up to the Bridge Classic Cars Mailing List

Back In The Swing – Refitting the Fuel Tanks to the 1971 Jaguar XJ6

The replacement fuel tanks are now secured in their new home at the rear of the 1971 Jaguar XJ6 at Bridge Classic Cars.

After much hard work and careful approach by our incredibly experienced technician Dave, the XJ6 can now start to be fitted back together. As you may have seen previously, Dave was working on converting a set of later style tanks to work on this earlier car. Some of the fittings and placement for a series of vents and inlets were in slightly different places over the production run of these wonderful cars.

As you can see from the photos, the tanks nestle up under the rear quarter panels in a very tight fit. Dave worked his magic gained from years of experience to ensure they were safely fitted and secured for the owner.

There’s more to come from the XJ6 so keep an eye out on the News Page of Bridge Classic Cars.

Getting Prepared – Preparing the 1987 Daimler Double-Six for Bodywork.

It’s been a little while since the last update on the 1987 Daimler Double Six currently in with us at Bridge Classic Cars.

Since the last time, this Daimler has had all its brightwork and trim removed for our in-house restoration team to assess anybody repairs that need to be made to preserve this classic example of British luxury for many more years to come.

Tamas, one of our restoration technicians, has been carefully removing and safely storing each piece of trim that has been taken off the car. Methodically working his way around the entire car until it as you see in the photos.

Since the tear-down has been completed, expect to see more updates very soon on the News Page about this much forgotten Classic.

This Just In – 1973 MG B Roadster

The MG B Roadster. A staple of British Sportscars for decades. Beloved by many for its small, lightweight feel but its solid reliability.

This particular 1973 MG B Roadster has come into Bridge Classic Cars for recommissioning. It will be assessed by each of our in-house restorations teams to determine what needs to be done and in what order.

It’s lovely to see a car that is still so original but has led an honest and enjoyed life in its previous years. But, the time has come for this iconic sportscar to be bought back to its former glory.

Best Side Forward – Building up the Bonnet of the 1973 Jaguar E Type Series 3 Roadster.

One of the most recognisable parts of a Jaguar E Type is its long, elegant bonnet. It is also one of the most beautiful shapes of any car. That is certainly true with our Fern Grey 1973 Jaguar E Type Series 3 Roadster.

After the bonnet had come back from being painted and finished by our in-house paint team here at Bridge Classic Cars, the ultra-rare colour looks absolutely phenomenal. Then once Matt and Chris in the paint team were happy with the finish and high sheen of the bonnet, it was handed over to our restoration technician Scott.

Scott has been part of this project all the way through its work. He knows the car probably better than anyone due to the number of hours he has put into this single car.

Carefully, Scott began the process of putting in the grilles. Along with those was the indicators, being gentle not to mar any of the stunning work Matt and Chris have done.

The headlights complete that famous E Type look. All hand-wired by Scott to make sure the cabling runs for the harnesses fitted perfectly and worked without issue.

This Just In – 1984 BMW 635CSi

An icon of 1980s style and presence. The legendary BMW 635CSi.

This particular example is a 1984 car. the E24 635CSi was (and still is) one of the most desirable classic cars for all ages.

This car is in with us at Bridge Classic Cars to have some paintwork and bodywork issues assessed by our in-house restoration teams and come up with a plan to get this wonderful long-legged luxury coupe back to its former glory.

But after all that has been completed. What’s going to happen with this stunning car?

Keep an eye out on our News Page for more updates on this legendary car.

Bridge Classic Cars at Goodwood Members Meeting 2021

October 16-17th will see the annual running of the Goodwood Members Meeting. Bridge Classic Cars will be there!

Head over to Stand 47 (Just outside the Bonhams Arena) to pop in and see the incredible work we have on display.

Save the date and get your tickets here!

On the Ground – Checking Fitment and Set Up on the 1973 Jaguar E Type Roadster Series 3

Scott has been hard at work on the one-off 1973 Jaguar E-Type Series 3 Roadster that is being built here at Bridge Classic Cars.

This marks a milestone in the cars journey. Since this is a bespoke E Type project for a very special client, it has had a very bespoke suspension set up. But, to make sure everything fits and works as it should, the car needed to be down on the floor. This meant fitting up its wheels and starting the suspension set up.

Once this unique E type was down on the ground Scott could begin work on adjustment to the set-up. This is not the final set-up as we still need to have everything in the car before its complete suspension can truly begin. But, Scott wanted to check there would be no interference from any components as they cycled and as they rotated.

Success. Everything fitted just as Scott had hoped and as intended like any of the Bridge Classic Car Projects.

Next up for Fern Grey, is getting started on the wiring…

Final Fitment – Door Cards on the 1987 Mercedes 500SL

The art of interior trim is something our in-house trim experts have mastered over years of experience.

A great example of this is the door cards on our 1987 Mercedes 500SL. These are all being entirely made in-house in our trim shop. The fit and finish of our interior pieces is world class thanks to our amazing team.

The door cards themselves were fabricated from scratch in order to best match the originals ensuring an extremely close fit to the same standards as they would have left the Mercedes trim shop in 1987, if not even better.

All of the associated trim pieces for the doors are also being retrimmed with the same level of care and attention to detail as the rest of the car which is currently under going full restoration here at Bridge Classic Cars.

Keep a look out on our News Page for more updates on the masterpiece of German engineering.

Coming Soon – 1984 Jaguar XJ

This 1984 Jaguar XJ has recently had a respray done on it by another Bodyshop.

It will be coming in soon to us here at Bridge Classic Cars to have a look at the Bonnet and Decklid. Our in-house paint and bodywork teams will assess the components and then work out a plan to get this stunning old Jag back to top condition.

Keep a lookout on our News Page for more updates on the 1984 Jaguar XJ.

Starting Over – Dismantling and Rebuilding the Interior of the 1956 Jensen 541

This is a perfect example of the level our in-house trim experts at Bridge Classic Cars work to.

The first photo shows what was left of the rear seat of the 1956 Jensen 541. There wasn’t a lot left after years of uncovered storage. But, thankfully our in-house teams could disassemble the old seat to then reverse engineer the piece.

Kath and Brian managed to completely recreate the wooden base piece by piece using the same techniques as the original trimmers. Once the wooden base had been built up and fixed together, it was time to start hand shaping the foam.

The foams of the seats have to be hand faired to make sure it flows perfectly once the covers are made for this particular car. Being able to reference the previous 541 series interiors, our in-house trimmers got the shape of the foams spot on.

Next up for the interior of the 1956 Jensen 541 will be its interior colour choice and the trim team will begin to make its covers.

Breathing New Life – Preparing the Rocker Covers on a 1967 Ford Mustang for Paint

With American V8s the first thing you notice in the engine bay is the Rocker Covers.

One of the most iconic of these is the historic ”Cobra by Ford” covers that graced the tops of some of the most legendary race and sportscar engines the American continent has ever produced.

Our 1967 Ford Mustang has got these very covers fitted on top of its small-block V8. These covers will be refinished in-house by our paint and body teams to make sure that when they go back on, they look just like, if not better, than the day they were fitted.

Step by Step – Servicing a 1930 Packard 740 Waterfield Convertible

It’s not every day that you get asked to service such a rare and unique piece of American pre-war history.

But when the customer arms us with the complete checklist to carry it out, there’s no question on what needs doing. One of our most senior techniains (and workshop controller) John, took charge of working on the vast Packard. Beginning with a full inspection of components and systems while then working his way through each of the service items listed in the book.

When it comes to servicing and maintaining classic and vintage vehicles, Bridge Classic Car has a vast amount of history and knowledge in these matters. From the smallest jobs to the largest restorations, Bridge Classic Cars in Suffolk, UK can always lend a hand.

Fired Up – Starting the 1990 Range Rover CSK

The last time we showed you the assessment done on the wonderful 1990 Range Rover CSK that we currently have in at Bridge Classic Cars for sympathetic restoration.

After the assessment was done by our technician Mauro, the first port of call was to try and get the 3.9 litre V8 to fire into life. From the assessment, we could see all of the soft fuel lines had cracked and were too brittle to attempt to be pressurised. For that, Mauro fitted up a testbed fuel system to ensure the Range Rover would get all the fuel it could need.

As mentioned in a previous blog post, the starter motor had failed. Before rigging up the fuel, Mauro installed the brand new starter motor to the engine to make sure the big V8 would turn over well enough to be fired.

With the testbed system in place, it was a case of adding the fuel, the air and spark into the chambers. Success. The now 31-year-old V8 roared into life inside of our workshop.

Next on the list of mechanical checks for the CSK while it’s here at Bridge Classic Cars, is to see if the Range Rover will move under its own power…