Brian has started work on our 1955 Aston Martin DB2/4 Drophead Coupe. He has been making the centre console lid. He did this by making the wood base, adding the wood edge sections, glueing this to the base section, making a new foam top section, cutting to shape, and fitting foam to the wood base.
Our 2013 Range Rover Vogue has been in the Bridge Classic Cars paintshop with Alan, who has been making some repairs to the rear bumper. Alan stripped out the rear light and bumper moulding, repaired the bumper and painted it as well as the bumper moulding. The rear bumper and new rear light were then […]
Before our 1958 Austin-Healey 100-6 gets delivered to its new owner, classic car technician Jonn has been doing some finishing touches to this beautiful classic. He first attended to the non-existent washer system. After finding a suitable place to mount the bag and pump, Jonn made a bracket to support the bag etc. He then […]
Brian has been giving our 1959 Jensen 541R some attention. He screwed the door cappings to the top of the door panels and fitted the chrome trim along the top of the door cappings, before cutting & filing holes in the chrome trim to fit around the quarter light brackets. He then adjusted & fitted […]
The Bridge Classic Cars interior trim team of Brian and Lydia have continued their work on the interior of our 1953 Aston Martin DB2/4. Lydia carried on her previous work making the seat backs. She altered the shaping slightly to improve the fit, added piping where necessary and then attached the sides. Lydia then fitted […]
Workshop manager John has been working on our 1987 Mercedes 500 SL. He started by trial-fitting the heater box to check the panel alignment. Monty has also been working on aligning the bulkhead.
Steve has been working on our 1980 Volvo 245GL. He noticed that, intermittently, the dash lights were not coming on, and the battery was not charging. He found poor connections on the voltage stabiliser and alternator controller that he cleaned up. The rear fog light wire was broken near the tailgate hinge so this has […]
Our 2000 Mercedes CLK 230 has been under the care of classic car technician Jonn who has been looking into why it is currently not starting. Jonn stripped and removed the old fuel pump and filter assembly. He then fitted a new pump, wired it up and tested it. The pump was running fine but […]
Our interior trim team have been stripping down our 2005 Honda S2000. After removing the front seats and all plastic trim panels, Brian loosened the metal bar at the bottom of the roof before undoing the roof from the rear and removing the complete roof and frame from the car. Brian then removed the clips […]
While our 1970 MGB Roadster is in the Bridge Classic Cars workshop, it has been in the car of one of our fabricators, Monty. Monty has welded a front wing trip piece onto the car as it needed repair. The front wings then went into the paintshop where Mauro applied epoxy primer to them.
Classic car technicians Monty and Chris have continued their work on our 1951 Austin Devon Pickup. Chris has been repairing the wing and bumper. The chassis of our Devon has also been prepped and painted in the Bridge Classic Cars paintshop while some of the bodywork has been painted with black dtm. Terry has been […]
After the re-chromed grill of our 1955 Aston Martin DB2/4 arrived back at the Bridge Classic Cars workshop, classic car technician Steve fitted it back onto the car. As you can see, the already stunning classic looks even more impressive with its grill reinstated.
Interior trimmer, Lydia has been working on the backrest part of the front seats of our 1953 Aston Martin DB2/4. This was slightly more challenging than expected as they are much larger than the bases, and the flutes run all the way up the faces. Lydia used her pattern from the bases for the flutes […]
On the 6th of September 2021, we posted on the Bridge Classic Cars Facebook page telling the story of a 1961 Alvis TD21 that unexpectedly arrived at the workshop for an urgent repair on its way to a car show. Then, just a couple of weeks ago, Stephen Jenkins sent us a message saying he […]
Classic car technician Jonn has been completing some repairs on our 1979 Ford Escort Ghia. The doors have been adjusted and the engine levels were checked before the coolant was topped up. Our classic Escort will soon be available to win through Bridge Classic Cars Competitions.
Classic car technician Jonn has been putting the UK plates on our 1958 Austin-Healey 100/6. He measured, drilled, and painted the brackets before securing them on the car. Both the front and back number plates were then fitted.
Interior Trimmer Lydia has made some additional piping to add to the rear panels of our 1955 Aston Martin DB2/4, which will close up the gap between the panel and the roof. This improves the movement when you open the boot lid.
Change is a constant in life, and today, as Freddie completes his last day here at Bridge Classic Cars, we find ourselves reflecting on the contributions he has made during his tenure as Marketing Manager. Freddie’s time with us has been full of progress, improvement, and success. From the introduction of Bridge Classic Cars Competitions […]
Our 1968 Morris Minor 1000 Pick-Up arrived at the Bridge Classic Cars workshop yesterday afternoon. Now that it is here, our team of technicians will thoroughly inspect and assess this beautiful classic before it eventually goes live on Bridge Classic Cars Competitions.
Interior trimmer Brian has been continuing his work on the 1953 Aston Martin DB2/4. He sandblasted the metal frame legs on the front seat squab frames. He then glued 10mm of foam on top of the original front seat back foam before trimming it to size. The old covers from the rear seat base panels […]
Classic car technician Steve has begun working on our 1979 Reliant Scimitar. He started by investigating the brake master cylinder that was leaking fluid into the servo. The servo diaphragm was leaking air when the brakes were applied so both parts will need an overhaul. The door switch contacts were found to be corroded so […]
To prepare for our 1953 Land Rover Series 1 to be delivered to its new owner, classic car technician Jonn has assembled the hard top roof, bolted up the panels and removed the roof for full assembly. He then fitted the seals between the panels and the edges before measuring up and cutting and glueing […]
The 2024 Mazda MX-5 has been unveiled to the public at the Japan Mobility Show. The unveiling marks the first time since the current generation was released in 2015, that subtle exterior design updates have been made to Mazda’s award-winning sports car. These changes include a fresh LED headlight design that now incorporates daytime running […]
We are awaiting the arrival of two more classics that will soon be available to win through Bridge Classic Cars Competitions. 1932 Austin Ulster Manufactured in 1932, this is a stunning box saloon. The body was rebuilt between 2009 and 2010 and has been finished in the rich dark British racing green and black cycle […]
Our 1905 Riley 9HP may be more than 100 years old but, thanks to our team of skilled technicians and our friend, Darin at Ashbocking Joinery, this is one special car that looks as good as it ever has. With the wood sections of the car being worked on and fitted to this one-of-one prototype, […]
Our 1972 Ford Transit Tipper has been with interior trimmers Brian and Lydia. They have been glueing the rubber door seals and fitting them to the door frames. They have also been doing some remedial work on the sun visors, as they are no longer self-supporting. Lydia added some heat shrink to the attaching tubes […]
Our 1976 Triumph Spitfire bulkhead has been modified by classic car technician Rob, to ensure the bonnet gaps are correct. Rob then finalised the door gaps before repairing the anti-roll bar brackets on the chassis. The boot lid was repaired and trial fitted before the front wheel arches were removed from the bonnet to allow […]
Before our 1970 Lotus Europa goes live on Bridge Classic Cars Competitions, classic car technician Jonn has been making some final repairs. The fuel gauge was reading full and off the scale. However, when the tank was drained there were 15 litres inside. Jonn was unable to remove the sender in situ as it had […]
Jonn has been working on our 1987 Mercedes 500SL. He assembled the wheel bearings and hubs and fit them to the car. New discs were also fitted before the wheels were refitted. Jonn checked and adjusted the bearings. The bearing nut needed to be tightened, which Jonn did as well as fitting a dust cap.
Classic car technician has been hard at work completing some of the finishing touches on our 1974 Volkswagen Beetle. Tom replaced the rocker cover gaskets as well as the driver’s side front arm ball joint cover. Our classic Beetle is now very close to leaving us and going home to its owner.