Posts by Rob Harvey

We recently welcomed our 1960 MG Midget into the Bridge Classic Cars workshop. It will now begin its restoration journey with the workshop team.

Steve recently identified a fuel leak originating from the electrical terminal of the cold start solenoid of our 1964 Mercedes 230SL. This component plays a crucial role in aiding the engine’s start-up, especially in colder conditions, by delivering a precise…

We don’t see modern cars in the Bridge Classic Cars workshop very much but, recently, a friend of ours brought their beautiful 2021 Alfa Romeo Giulia Quadrafoglio in for some new tyres.

The customer reported a few issues with our 1985 Mercedes 500SL, and Pete confirmed most of them during a test drive: Lighting Issues While the external lights are fully operational, there were a few concerns with internal and auxiliary lighting:…

Pete has made some good progress with out 1993 Jaguar XJS recently. He fitted seatbelt clips with covers, using a mix of old and new parts to create these, as they are an extremely rare item to come by, whether…

Classic car technician Steve has been conducting his initial check and assessment of our 1976 Jensen Interceptor. His findings will now be reported back to the owner.

Pete removed the very tired old shocks on our 1977 Ford Granada and replaced them with new Gaz adjustable units. The old shocks had very little damping effect and could easily be compressed by hand, while the new units should…

Rob has been repairing some of the corrosion on our 1963 Rover P4. He welded in the front wheel arch closing panel before removing the front chassis outrigger. He then repaired the chassis behind the outrigger and fitted a new…

Jonn removed the fuel filter of our 1968 Lotus Cortina and cleaned it thoroughly before refitting and securing it. He turned on the ignition to check for leaks and discovered that the rear carburettor was leaking at the fuel union….

Jonn has been working on our 1975 Volkswagen Beetle. He started by stripping and removing the nearside window regulator, which was found to be worn out. He fitted a larger washer to secure the nearside seat trim and painted it…

Pete has been removing the AC condenser on our 1993 Jagura XJS. It proved to be quite tricky getting the old collapsed unit from the car and freeing all the seized pipes and fittings The new part was incorrect so…

Jonn has been completing some repair work on our 1977 Triumph 2500TC. He began by getting the car onto the ramp and raising it up so he could get a detailed look at the work that needed to be done….

Steve has fitted a new kingpin to the assembly on our 1964 Mercedes 230SL. He also fitted new top and bottom joints, and new bushes too. He also made some welding repairs before noticing that the driver’s footwell carpet had…

Our 2002 Ford Thunderbird has been in the paint shop. After its bumpers were primed and painted, other parts of the car received the same treatment before it was put back together again.

Our 1968 Lotus Cortina has only been here in the Bridge Classic Cars workshop for a relatively short period of time. However, Jonn has already completed various tasks to get it ready to go into competition. Here are Jonn’s notes…

Our 1964 Mercedes 230SL has been in the experienced hands of classic car technician Steve. He cleaned up the loose sealer and surface rust around the rear arches and the rear chassis rails before applying a new coat of under…

Dave has recently been extremely busy with our 1969 Audi 70L. The car needed to be completely stripped down for the rest of the work required to be completed. Once Dave had finished stripping our Audi, the car moved on…

While out on our Mince Pie Drive, the driver’s door release cable snapped on our 1961 Austin Mini 850. Once it had finished helping us spread some festive cheer to local care homes, Jonn repaired the cable and it is…

John has made and fitted new down pipes to our 1964 Mercedes 230SL. This is because the old ones had to be cut off as they had seized. New baulk head sound deadening was fitted before John investigated the non-starting…

It was noted from the appraisal that our 1993 Jaguar XJS had a faulty gearbox mount. Pete recently removed it from the car and stripped it down to its component parts. The rubber had completely degraded and was very much…

Our 1994 Land Cruiser has quite a lot of work completed on the areas of rust that have been found. It has been in the Bridge Classic Cars paint shop with Chris as he has begun the repair work on…

Our friends at Wheelhouse Alloys recently delivered the wheels to our 2002 Ford Thunderbird.

The fuel pump in our 1967 Mercedes SL250 has been dripping consistently since the workshop team got the car up and running. Peter removed the pump and stripped it. He found that it had previously been sealed using normal silicone…

Peter has made more progress with our 1993 Jaguar XJS. The front and rear brakes were checked over and he cleaned up any loose debris. He made minor repairs to the driver’s front backing plate as it was misshapen leading…

Jonn has been adjusting the carb mixtures of our 1956 Jensen 541. He left the air filter housing in place and removed the brass jet covers from underneath and adjusted each jet in turn. He then refitted the brass caps,…

Earlier today, Tony loaded and delivered our 2003 Rover 75 back to its owner.

Steve has been fitting the heat shielding around the inner wings of our 1975 AC Cobra replica, where the exhaust manifold exits the engine.

Peter has been conducting an appraisal on our 1968 MGC Roadster. Here are his findings: Appraisal.. drivers door lock seized, can’t check keys, passenger door lock spinning in door can’t seem to fit a key, passenger door button sticks in…

It’s been a long time coming but our 1979 Ferrari 400 GT is now pretty much ready to be photographed and filmed before going live on the Bridge Classic Cars Competitions website. After Jonn took the car out for a…

It’s been a busy week in the headlines for Jaguar and it’s been a busy week for Jaguar in our workshops too. Peter started with us at the beginning of the week and he’s already making great progress on some…