Work on our 1972 Triumph Stag

Picture of By Craig Ranson
By Craig Ranson

Refit exhaust front pipes and crossover pipe. Position and fit clamps.

Remove driveshafts, split boots and gaiters. Clean all bolts.

Fit new gaiters and boots to both rear driveshafts. Use lockwire to secure and bolt up both shafts.

The customer reported excessive movement in the steering so we have removed the column and both upper bearings, replaced lower bush and replaced outer to inner rubber bushes.

Share this post
Enjoyed this article by Craig Ranson?
Email Craig Ranson