land rover trim

Land Rover Amendments

Lots have been happening with our new Land Rover Series IIa this week. Scott (our in-house Land Rover Specialist) has diligently attending to the issues

Read More »

Top And Tail

Our new 1994 Land Rover Range Rover TDI is getting some top to bottom TLC, starting with the top! The ceiling cloth was in need

Read More »

Land Rover Amendments

Lots have been happening with our new Land Rover Series IIa this week. Scott (our in-house Land Rover Specialist) has diligently attending to the issues and has now almost completed it. We’ll be aiming to shoot it next week so keep your eyes peeled!

Scott has replaced an rewired the window wiper mechanisms which sit in the cab on the dashboard.

We’ve also ordered a front bonnet spare wheel holder kit which has been bolted onto the front and now just awaits a spare wheel to grace it.

Scott has also replaced the rear exhaust box as the original was showing signs of rust beyond repair.

New rubber matting has been made, cut and fitted for the back pick up area. Originally just bare metal, the pick up interior is now kitted out in fresh matting.

The most noticeable change is of course the new canvas tilt which Scott fitted yesterday. The tilt process includes fitting a metal frame and pulling of the canvas over and tying it down.

Scott has been working on some wiring issues, he’s fitted new headlamps and changed the galvanized corner capping on the rear of the buck.

Range Rover’s Tidy-Up

The 1994 Range Rover TDI has had a small trim shop tweak. The rear carpet has been replaced to fix the damaged vinyl.

The Range Rover is now sat in the paint shop where its had its base layer completed and is now being polished, desmasked and prepped for its next layer of paint.

Top And Tail

Our new 1994 Land Rover Range Rover TDI is getting some top to bottom TLC, starting with the top! The ceiling cloth was in need of some refurbishment, so Kath, one of our Trim specialists took it apart and re-glued that fabric.

Although the ceiling cloth didn’t need a total replacement, some of the fabric had come loose which meant that Kath had to peel back the fabric, pull it tight and then re-glue it.

After making sure all the fabric had been glued back down, Kath turned the ceiling fitting around and pulled the fabric over the edges to make sure it all stuck. The end result was a smart refurbished ceiling cloth. Good as new!