Ady, Bridge Classic Cars’ engine specialist has set to work on our Peugeot 504 Engine recommission. Before removing the engine Ady has checked each cylinders compression. We’ve found slightly low compression on one of the cylinders and will report this
Ady, Bride Classic Cars’ engine specialist has completed another full engine rebuild on this Mercedes Pagoda Engine. Does your classic vehicle engine need some TLC? Get in touch with our team of experienced Classic Car Technicians to see how we
Ady, Bridge Classic Cars’ in-house engine specialist has been working on a complete engine restoration on our 1960 MG A engine. Here is a brief rundown of Ady’s process: Totally strip down the engine Unlead the cylinder head to run
This morning the engine and gearbox have gone into our Jensen 541R chassis. See below for a timelapse of John and Paul guiding the engine into place. View this post on Instagram Teamwork makes the dream work! ? Our Jensen
Ady, Bridge Classic Cars’ in-house engine specialist has completely rebuilt the engine on our Saab 9-3. She’s now up and running beautifully. Fit and raring to take to the roads.
This 2006 Saab has been brought into us at Bridge Classic Cars as a non-runner. Ady, our engine specialist has found that the engine has a broken cam-belt and broken rocker fingers. He’s busy stripping the engine and will be
Ady, our in-house engine specialist here at Bridge Classic Cars is now onto assembling the engine. The following has been completed on this lovely motor. Cylinder head has been unleaded New valve guides fitted New exhaust valves Valve seats have
Here at Bridge Classic Cars our engine specialists have been getting our MG A engine ready for assembly. Darren has painted the engine block and Ady has either refurbished or replaced all the other components.
Ady’s finished up work on our Mercedes 220 Engine rebuild. The engine has had a brand new bespoke machined flywheel, valve seals cut, valves refaced and new valve guides. The camshaft has been re-profiled and the engine block completely re-bored.
Ady, Bridge Classic Cars’ engine specialist has set to work on our Peugeot 504 Engine recommission.
Before removing the engine Ady has checked each cylinders compression. We’ve found slightly low compression on one of the cylinders and will report this back to the customer.
We then removed the engine and took off some components including the inlet manifold for sandblasting and painting.
We’ve found that front engine cover was worn due to being incorrectly previously fitted. The front crankshaft pulley also is showing signs of wear. Based on our findings Ady is recommending a lip seal conversion.
Once these issues with the engine have been resolved we will be fully detailing the engine and engine bay to get this lovely rare classic show ready.
Ady, Bride Classic Cars’ engine specialist has completed another full engine rebuild on this Mercedes Pagoda Engine.
Does your classic vehicle engine need some TLC? Get in touch with our team of experienced Classic Car Technicians to see how we can help you.
Ady, Bridge Classic Cars’ in-house engine specialist has been working on a complete engine restoration on our 1960 MG A engine.
Here is a brief rundown of Ady’s process:
This morning the engine and gearbox have gone into our Jensen 541R chassis. See below for a timelapse of John and Paul guiding the engine into place.
Ady, Bridge Classic Cars’ in-house engine specialist has completely rebuilt the engine on our Saab 9-3. She’s now up and running beautifully. Fit and raring to take to the roads.
This 2006 Saab has been brought into us at Bridge Classic Cars as a non-runner. Ady, our engine specialist has found that the engine has a broken cam-belt and broken rocker fingers. He’s busy stripping the engine and will be diagnosing and fixing any potential faults he finds to get this vehicle back out onto the road.
Ady, our in-house engine specialist here at Bridge Classic Cars is now onto assembling the engine. The following has been completed on this lovely motor.
Here at Bridge Classic Cars our engine specialists have been getting our MG A engine ready for assembly. Darren has painted the engine block and Ady has either refurbished or replaced all the other components.
Ady’s finished up work on our Mercedes 220 Engine rebuild. The engine has had a brand new bespoke machined flywheel, valve seals cut, valves refaced and new valve guides. The camshaft has been re-profiled and the engine block completely re-bored. The crank shaft has been re-ground along with new gaskets and bearings being fitted.
Check out the video below to see her up and running for the first time!
