classic mercedes pagoda

In-Place – Fitting the New Heater Matrix and Reinstalling the Dash on the 1969 Mercedes 280SL Pagoda

The brand new heater matrix has been installed into the 1969 Mercedes 280SL Pagoda by the workshop team at Bridge Classic Cars.

During testing, the original heater matrix was found to be leaking so the Bridge Classic Cars team sourced a new replacement. This was fitted in behind the dash by the workshop team and the various pieces of the dash assembly secured around it.

Now with the heater matrix in place inside the classic Mercedes, the workshop technicians can begin testing the car once again.

Out the Box – Brand New Heater Matrix for the 1969 Mercedes 280SL Pagoda

The brand new heater matrix for the 1969 Mercedes 280SL Pagoda has arrived at the Bridge Classic Cars workshop in Suffolk ready to go back into the car.

Previously, our workshop technicians discovered a leak under the dash of the classic Mercedes Pagoda and upon inspection discovered the heater matrix was leaking from a previous poor repair on the piece. The original was sent to a specialist to be refurbished but the workshop took the decision to source a brand new component for the car to make sure that everything works exactly as it should when the coolant system is repressurised.

Going Together – Preparing Parts and Fitting the Gearbox for the Engine of the 1969 Mercedes 280SL Pagoda

The 1969 Mercedes 280SL Pagoda might just be one of the most beautiful cars we’ve had in the Bridge Classic Cars workshop at our Suffolk HQ. But, we want to hear it run and drive.

So, our in-house restoration technician Jon has been working on getting all the parts ready for the car and fitting up the automatic gearbox.

Jon has carefully inspected and refinished most of the reusable metal hoses for the 280SL so that each individual piece looks as good as the day it was new. He also dismantled many of the air and oil boxes/cans so they could be taken into our in-house paint shop and refinished.

Once all the pieces were back on Jon’s bench, he began to reassemble them ready for the engine installation into the car. But before then, a big piece of the puzzle had to be put in.

Jon and Paul prepped the engine to be mated to its automatic gearbox. This has been rebuilt and refinished so it looks as good as the newly built engine. Once the technicians had got the gearbox secured to the back of the engine block with all the internals correctly fitted up and spaced, Jon then began to test fit the various pipes and wires that go to and from the gearbox to make sure everything was present and correct before the next phase begins…