classic jaguar

Brakes And More

All of the brakes on our 1970 Jaguar E-Type Series 2 have been bled by classic car technician John. After bleeding the front brakes, John

Read More »

Refitting An Engine

John has been preparing our 1970 Jaguar E-Type Series 2 for its engine to be reinstalled. A new clutch was fitted and the gearbox and

Read More »

All Cleaned Up

After having rust repairs completed, our 1968 Jaguar E-Type Series 1.5 has had a thorough clean and is looking great! Parked in The Atelier with

Read More »

Fixing Rust Issues

Our 1968 Jaguar E-Type Series 1.5 has spent some time in the Bridge Classic Cars paintshop recently. Classic car technician Chris has been resolving a

Read More »

Inspecting Our E-Type

Our 1970 Jaguar E-Type Series 2 has returned to the Bridge Classic Cars workshop to investigate and resolve some issues that the owner has been

Read More »

East Coast Mini Club

Our 1967 Jaguar E-Type Racing Series 1 received some attention in the East Coast Mini Club Facebook group recently. The names of Bridge Classic Cars

Read More »

Investigating A Rattle

Our 1972 Jaguar E-type V12 Series 3 has been in the experienced hands of classic car technician Jonn. A rattling sound has been heard coming

Read More »

Our E-Type Returns

As much as we love seeing restored classic cars leave our workshop to be enjoyed by their owners, we can’t deny that we love seeing

Read More »

Leaking Gaskets

To gain access to the leaking rocker cover gaskets, classic car technician Scott had to remove various parts of our 1988 Jaguar XJS Convertible. Once

Read More »

A New Exhaust Fitted

A new stainless steel exhaust has been fitted to our 1972 Jaguar E-Type V12 Series 3 by classic car technician Paul. While Paul was working

Read More »

E-Type Suspension

Classic car technician Paul has been working on the suspension of our 1972 Jaguar E-Type V12 Series 3. He installed new poly bushes to the

Read More »

Brakes And More

All of the brakes on our 1970 Jaguar E-Type Series 2 have been bled by classic car technician John. After bleeding the front brakes, John reassembled the front suspension. All the brakes were bled as it was noticed that the brake fluid looked high in water content.

John went on to clean and fit new bonnet bushes and pins. He rewired the loom to the bonnet as it was hard-wired to it previously – John had to cut the wires to remove the bonnet. Once the bonnet was refitted, the wiring was completed and connected to the inside of the bonnet and to the new connector plug.

The bonnet ram was cleaned and repainted before John went on to refit the stereo and interior. While doing this, he noticed that the horn and the main beam flash weren’t working. After checking and replacing the fuse, John found some ‘interesting’ wiring behind the dash which had been done prior to coming to us.

Exhaust blow was coming from the downpipes so these were removed, cleaned, and resealed. The thread of 3 studs had gone so these were removed and replaced with nuts and bolts instead. After tightening and testing, everything was working as it should.

The Late Queen’s Jaguar Donated To Comic Relief By Chris Evans

A 2009 Jaguar X-Type Estate that was previously owned and driven by the late Queen Elizabeth II has been donated to Comic Relief by Chris Evans and his motoring event, CarFest, to help raise money for the charity’s Red Nose Day appeal.

The Queen was photographed driving the car and the original vehicle handbook confirms the registration as PYN 1F which belonged to the late Monarch.

The 2009 Jaguar X-Type Estate comes in Emerald Fire with a Barley Leather interior. It was designed by Ian Callum and has a sunroof, automatic transmission, electric windows, climate control, and a Jaguar Heritage Trust Certificate. It has covered 73,000 miles and it was previously sold at auction in November 2022 for £43,000.

If you want to own this extremely special vehicle, you won’t need to pay out that much though. Instead, you can win it by sending a simple text message. Full details here.

When speaking about donating this very special Jaguar, Chris Evans said “I’m so grateful CarFest is able to support Comic Relief and I’m thrilled that we are able to donate this very special historic car, and so pleased to be able to share it with another enthusiast, especially for such an important cause.”

Samir Patel, who is the CEO of Comic Relief said “We are enormously grateful to Chris Evans and CarFest for this generous donation for Red Nose Day – this truly is a prize like no other we have ever been able to offer our supporters. This is an extraordinary opportunity to own a real piece of history and will be such a special prize for the lucky winner.

“From homelessness to mental health problems to food poverty, the money raised will help people facing incredibly tough times in the UK and around the world. Huge thank you to everyone who enters.”

Red Nose Day 2023

Red Nose Day 2023 will be taking place on Friday 17th March 2023. All the money raised will go towards supporting people who are struggling due to the cost of living crisis as well as trying to tackle issues such as homelessness, mental health problems, and food poverty both nationally and internationally.

Part of the money raised will also go towards helping the victims of the earthquake in Turkey and Syria.

Refitting An Engine

John has been preparing our 1970 Jaguar E-Type Series 2 for its engine to be reinstalled.

A new clutch was fitted and the gearbox and overdrive unit were refitted too. John also painted various suspension pieces black where the paint had chipped off previously.

As the engine installation continued, John began making the connections and refitting the ancillaries. The sump bung thread was bad so the bung wouldn’t tighten. This was stripped and tapped out so a new helicoil could be fitted. The bung was then refitted with PTFE tape and sealer.

The overdrive wires to the gear knob switch split during insulation. John shrink-wrapped these to protect them before fitting the gear leaver. The engine and gearbox oils were filled and the car was tested on the ramp before final fit-up took place. John found that overdrive now worked fine in 4th gear so the reassembly of this classic E-Type could continue.

John went on to refit the front hubs. He also bled the brakes before refitting and tightening the wheels. The radiator was also put back in the car.

The owner of our 1970 Jaguar E-Type Series 2 requested that the steering column bearings were replaced so John made sure this was done. He stripped and removed the column and, as he was doing so, John noticed that it had had its bearings looked at before. The bearings were replaced and the column was spaced out with a large washer. John then refitted the steering column.

Once the steering column was refitted and aligned, John made sure that the old bearings were kept secure for the owner of the car to see. He ran the car up to temperature and the fans cut in as they should.

Our 1970 Jaguar E-Type Series 2 is now ready for its engine installation to be finished this week as John continues his work on this beautiful classic car.

All Cleaned Up

After having rust repairs completed, our 1968 Jaguar E-Type Series 1.5 has had a thorough clean and is looking great!

Parked in The Atelier with a range of other impressive-looking classic cars, it certainly is an eye-catching vehicle.

Our E-Type has been in the Bridge Classic Cars workshop several times over the years and we always enjoy welcoming it back, and we look forward to seeing it back out on the road very soon.

Fixing Rust Issues

Our 1968 Jaguar E-Type Series 1.5 has spent some time in the Bridge Classic Cars paintshop recently.

Classic car technician Chris has been resolving a rust issue on the rear of this classic car.

After Chris had finished his work on our E-type, you can see from the pictures below that the car now looks much better and the rear appears to be free from rust.

Inspecting Our E-Type

Our 1970 Jaguar E-Type Series 2 has returned to the Bridge Classic Cars workshop to investigate and resolve some issues that the owner has been experiencing while driving the car.

Classic car technician Jonn started his investigative work by taking the car out for a road test. During his time in the car, he checked the overdrive operation and found that the solenoid powered and was working so it was suspected that the issue lies with the overdrive unit.

The speedo cable was also checked to see what might be causing it to jump during driving.

The handbrake warning light has been reported to come on during driving. Jonn found that the brake fluid reservoir was loose on the nearside which could be the reason for the light engaging.

When the car was up on the ramp, Jonn noted that there were a few oil leaks too.

To fix an issue with the clutch, the engine and gearbox need to be removed from our E-Type. Jonn began the process of removing these so he could fix the issue.

The bonnet hinges had seized so, to allow Jonn access, he heated the pins to aid the removal.

During the engine removal process, it was found that the top hose of the radiator was damaged. The front suspension was stripped to take the tension off the torsion bars.

The engine and gearbox removal then moved on to the interior centre console being stripped so Jonn could remove the gear lever and wiring. Classic car technician Rob then assisted Jon in removing the engine and gearbox.

The wheels were put back on the car so it can be moved to our secure storage facility until the engine and gearbox are ready to be put back in the car.

Jonn noted that there was lots of waxoyl covering many of the components making the job quite a messy one!

Once out of the car, the engine and gearbox were separated. The overdrive was removed and cleaned ready to be sent for repair.

The new clutch was aligned and fitted. Jonn removed the seized clevis pin in the clutch fork slave rod. He cleaned and replaced this with the new thrust bearing.

Our 1970 Jaguar E-Type Series 2 has turned into a big job that has required lots of time, skill, and experience. Luckily, Jonn (and the rest of the workshop team) have this in great quantities and the car is making good progress towards getting back to its owner and out on the road once more.

East Coast Mini Club

Our 1967 Jaguar E-Type Racing Series 1 received some attention in the East Coast Mini Club Facebook group recently.

The names of Bridge Classic Cars Directors, Gordon and Craig Ranson can be seen on the car.

Our racing E-type is back with us and we are very much looking forward to getting it running and ready for more photo opportunities in the future.

Investigating A Rattle

Our 1972 Jaguar E-type V12 Series 3 has been in the experienced hands of classic car technician Jonn.

A rattling sound has been heard coming from under the dash of this beautiful classic car. Jonn has been investigating what could be causing the noise and finding the best way of resolving it.

During his investigation, Jonn traced the rattling noise to a loose ac fan.

Once the fan was properly secured, Jonn found that the noise was no longer happening and everything was working as it should.

Working On Our 1968 Jaguar E-Type Series 1.5

After recently returning to the Bridge Classic Cars workshop, our 1968 Jaguar E-Type Series 1.5 has been under the care of classic car technician Scott.

Scott fitted new rear radius arms as the old bushes were shot. He also fitted new steering rack boots as the old ones had dried out and cracked. Scott went on to put the rear axle back together before stripping out the boot area and draining the fuel tank.

Once the tank had been drained and removed, Scott had better access to be able to assess the rust in the rear panel of the car.

After the rust has been assessed, the workshop team will also be investigating an issue with the front lights.

Our 1968 Jaguar E-Type Series 1.5 is a great-looking car and work will continue to get it back to its owner very soon.

Reassembly, Electrical Work, And More

After working on our 1972 Jaguar E-Type V12 Series 3 for the last couple of weeks, classic car technician John has been busy reassembling this beautiful classic car. Once everything was back together following the fitting of a hidden battery isolator, John conducted some tests and was pleased with the results.

While he was working on our E-Type, John noticed that there was a minor blow on one side of the exhaust. He resealed the exhaust to solve the issue.

The carburettor float bowls were stripped as the carbs were flooding at idle speed which indicated sticking needle valves. Each bowl was full of dirt and the needle valves were found to be covered in dirt too when they were removed.

The carb bowls were cleaned, blown out, and refitted. The last carb needed a gasket made for the float bowl as the old one was torn.

A new fuel filter was fitted near the tank and the sight glass was clean and free from dirt which made John think it could be the fuel lines themselves causing the issues. He stripped and blew out the fuel lines from rear to front. A lot of dirt came out before everything was reassembled and tested.

Our 1972 Jaguar E-Type V12 Series 3 had a good clean and, as you can see from the pictures below, looked extremely good afterwards.

In preparation for our E-Type leaving the workshop, John went on to check and adjust the tracking before turning his attention to the reverse lights that were not working. When they were powered up with the power probe, they worked fine which indicated that the bulbs and wiring were all ok. John stripped the centre console to access the switch. He removed the switch and found this was where the fault was. He lubricated the switch and refitted it without spacer shims before reconnecting it. After testing, John was satisfied that everything was working as it should.

Our E-Type Returns

As much as we love seeing restored classic cars leave our workshop to be enjoyed by their owners, we can’t deny that we love seeing them again too.

Our 1972 Jaguar E-Type Series 3 has come back to us to investigate a fault with the clutch.

Classic car technician Scott has already started work on this beautiful classic car and found the fault to be with the master cylinder. He has removed the clutch master and slave ready to install new ones that have been ordered.

While he was investigating the clutch issue on our E-Type, Scott also removed and flushed out the clutch reservoir before refitting it.

It probably won’t be too long before our 1972 Jaguar E-Type Series 3 leaves us again but we will certainly make the most of seeing it every day until the time comes to say goodbye once more.

Leaking Gaskets

To gain access to the leaking rocker cover gaskets, classic car technician Scott had to remove various parts of our 1988 Jaguar XJS Convertible.

Once he had access to them, he was able to remove the old gaskets and replace them with new ones.

After fitting new rocker cover gaskets, Scott began work on putting everything back together again. As he had removed the inlet manifolds, injectors, pipework, wires, and more, he had to reassemble everything before he could double-check his work.

Once Scott started the engine of our classic Jaguar, he looked for any leaks or other issues and was satisfied that the initial leaks had been resolved.

Our 1988 Jaguar XJS Convertible hasn’t been with us for very long but it has already been the focus of our classic car technicians. We are looking forward to seeing it back with its owner and out on the road very soon.

New Manifolds For Our 1972 Jaguar E-Type

Our 1972 Jaguar E-Type V12 Series 3 has had new manifolds installed by classic car technician Jon.

There was lots of stripping and refitting to be done throughout the process but, the end result made all of the effort very much worthwhile.

While Jon was working to strip components to access the offside exhaust manifolds, there was a particular bolt that proved to be quite challenging. The problem was that the bolt was seized and, each time Jon tried to remove the bolt, it felt like it was going to snap. Fortunately, with lots of patience (and even more lubrication), Jon was able to successfully remove the bolt and continue his work on gaining access to the offside manifolds.

Once the manifolds were removed, Jon cleaned everything up in preparation for the new ones to be installed.

The new manifolds were put in place and secured before Jon reattached the engine to its engine mounts.

When the new exhausts were fitted and secured, the original front pipe was found to be too long. Classic car technician Monty stepped in to help at this point and shortened the pipe while Jon continued his cleaning and reassembling.

While Jon was putting our E-Type back together, he noticed that a small coolant pipe was completely blocked. He unblocked this and replaced the hose from the header tank to this pipe.

As they were disturbed during the process of installing the new manifolds, all of the fuel hoses going to the carburettors leaked. These were stripped and replaced, as was the braided fuel pipe as this had gone hard and leaked too.

Once everything was back together, Jon found no obvious leaks. He replaced the vac hoses before starting the car. It ran as expected and Jon was satisfied.

The coolant vac filled and held pressure as it should.

Jon wasn’t done with his work on our E-Type just yet though as he went on to fit a battery isolator. To do this, he removed the top pad of the dash to meet the criteria of the car owner who wanted this part to be hidden. The glovebox and trim were removed so Jon could make and install a bracket to hold the isolator behind the glovebox.

A safe route needed to be found to route the cables through the bulkhead. Once Jon had decided on the best route, he drilled the holes accordingly. The isolator was then wired up and secured before the glovebox and trims were refitted.

Jon has spent quite a bit of time with our 1972 Jaguar E-Type V12 Series 3 lately and lots of progress has been made. It won’t be too much longer before we have to say goodbye to this beautiful classic car as it returns to its owner to enjoy being back out on the road again.

Checking Over Our 1988 Jaguar XJS Convertible

It may have only been in the Bridge Classic Cars workshop for a short while but classic car technician Scott has already been busy getting his assessment and inspection of our 1988 Jaguar XJS Convertible underway.

Scott noticed an oil leak during his checks so he spent some time looking for the source of the leak. He also gave the car a thorough looking at to look for any areas of corrosion. Any areas found have been reported and will be resolved while the XJS Convertible is in the workshop.

The diff and gearbox oil were also checked. Scott replaced the diff oil before replacing the broken grease nipple on the drive shaft.

Scott then went on to remove and clean the coolant level sensor before continuing his checks on the rest of the car.

Our 1988 Jaguar XJS Convertible will continue undergoing its checks and assessment as well as having any issues found resolved by our team of classic car technicians. Classic Jaguars like this are always enjoyable to have in the workshop so we will certainly make the most of having this one with us.

1954 Jaguar MKVII – The Restoration Continues

The restoration of our 1954 Jaguar MKVII has continued recently with quite a bit of work being completed by classic car technician Dave.

After the engine of this beautiful classic car was removed a little while ago, it has now been rebuilt by our friends at Coltec and delivered back to us here at Bridge Classic Cars. Dave has been working on getting the engine back into the car so it can continue on its restoration journey.

Prior to the engine returning to us, we were able to see the pistons being machined so it was great to see the full engine back with us and ready to go back into the car.

Once the engine was back in, Dave was able to get it running and conduct a check of its condition. He was pleased with the temperature levels but did some additional work on other areas of the car.

The 2 fuel pumps were drained, removed, and replaced.

While working on our 1954 Jaguar MKVII, Dave noticed that the fan was broken. A new fan was installed but, as is the case with a lot of the classic cars we work on, the new fan didn’t quite fit into place exactly as it should. Luckily, our classic car technicians are master craftsmen so Dave was able to weld some new lugs onto the car so it would accept the new fan being installed.

To make sure the new lugs blended perfectly with the rest of the car, Dave painted them black and, as you can see from the photos below, they are now in perfect keeping with the rest of this classic car.

Now that the engine is back with the car, work can continue on our 1954 Jaguar MKVII. We are looking forward to seeing things progress over the coming weeks and we are excited to see this impressive classic car back out on the road with its owner.

Delivering Our 1970 Jaguar XJ6 Series 1

We recently delivered our 1970 Jaguar XJ6 Series 1 to the very lucky new owner – Martin Tyte.

Martin won this impressive classic car through Bridge Classic Car Competitions in our live draw on 20th October 2022, with ticket number 18.

Everyone here is very pleased to hear that Martin loves his new car and we wish him many happy years (and miles) in his stunning new Jaguar.

A New Exhaust Fitted

A new stainless steel exhaust has been fitted to our 1972 Jaguar E-Type V12 Series 3 by classic car technician Paul.

While Paul was working on this classic car, he also removed the centre console to gain access to the gear selection illumination. He needed to do this in order to fit a new bulb which was required.

Machining Jaguar Pistons

The pistons of our 1954 Jaguar MK VII were machined recently.

As the pistons are such a vital component of the engine, it’s important that they are exactly right and, as you can see in the video below, care needs to be taken to make sure everything is perfect.

E-Type Suspension

Classic car technician Paul has been working on the suspension of our 1972 Jaguar E-Type V12 Series 3.

He installed new poly bushes to the front suspension which will absorb any bumps and knocks as well as reduce noise and vibration once the car is back out on the road.

Everything will be put back together and work will continue on this beautiful classic car.

Removing An American Emissions System

Our 1972 Jaguar E-Type V12 Series 3 had an American emissions system installed which classic car technician Paul has been working to remove.

He also serviced the car to make sure it will be in the best condition possible when it gets back out on the road.

Just Arrived – 1959 Jaguar XK150

Another beautiful classic car has arrived at the Bridge Classic Cars workshop. This time it is our 1959 Jaguar XK150 that has come in to be prepped for an MOT.

While classic cars older than 40 years are exempt from needing an MOT, it can be reassuring to have them put through their paces to make sure everything is as it should be.

This looks to be a fantastic example of an XK150 and we are excited to get to work on it.

New On MyClassics.co.uk – 1995 Jaguar XJS

If you haven’t visited MyClassics.co.uk recently, now would be a good time to pay the site a visit.

For those who haven’t heard of MyClassics yet, it is a brand-new platform for buying and selling classic vehicles. With no fees at any stage of the buying or selling process, it’s a very budget-friendly online vehicle marketplace.

One of the cars currently being sold on the platform is a 1995 Jaguar XJS. This convertible classic car has a 4-litre petrol engine, a little over 40,000 miles on the clock and a leather interior that looks to be in fantastic condition.

For the last 24 years, the car has sat in a garage patiently waiting for a new owner, and now the time has come for that new owner to be found.

A very detailed description of the car including a comprehensive history can be read on the listing so, if you’re interested, don’t wait too long as it’s unlikely this classic car will be available for more than a few days.

Investigating Starter Issues

One of our classic car technicians, Jon, has been investigating issues with the starter motor of our 1972 Jaguar E-Type.

As this is such a great-looking classic car, we are really keen to see it back on the road and in full working order very soon. While it is in our workshop though, Jon and the rest of the workshop team will get all the necessary work completed so it can cover a lot more mileage in the near future.

Engine Removal – 1954 Jaguar MKVII

Dave has spent a lot of time lately working on our 1954 Jaguar MKVII. During one of his inspections of the vehicle, he noticed that there appeared to be some damage to the engine.

As his investigation went deeper, he discovered grit in the oil and some damage to the big end. The result was the engine having to be removed from the car and sent to our partners at Coltec for a rebuild.

Removing the engine from this classic car is a big job but, as an experienced and skilled classic car technician, Dave was able to get the job done and he hopes to receive the rebuilt engine back soon.

Once it’s back with us, work will continue to restore the classic Jaguar.

New Arrival: 1972 Jaguar E-Type V12 Series 3

A new arrival this morning to the Bridge Classic Cars workshops. Working in conjunction with our good friend Lee at Autoshack. The 1972 Jaguar E-Type V12 you see below belongs to a customer of Lee’s having very recently been purchased from the The Classic Sale at Silverstone 2022 hosted by Silverstone Auctions.

The description reads as follows:

A decade after the original Jaguar E-Type arrived, the design progressively matured through 1971 with the introduction of the Series 3.  Designed to showcase the new smooth and torquey 5.3-litre engine, originally developed for Le Mans, the Series 3 cars were available as a Roadster or a 2+2 Coupé. The Series 3 is easily identifiable by its large cross-slatted front grille, flared wheel arches, wider tyres, a larger bonnet bulge, updated bumpers, four exhaust tips, and a badge on the rear that proclaims it to be a V12. It also featured uprated brakes, power steering as standard and a large horizontal scoop added to the underside of the bonnet to assist with cooling. The interior was entirely new in the V12, with more comfortable seating, stylish new door panels and a smaller, dished and leather-rimmed steering wheel. Being slightly larger and altogether much softer in nature, the E-Type in Series 3 form had lost the wildness of its youth but gained the long-legged touring profile to which it was arguably better suited.

The United States was always the target market for the E-Type and the model evolved over a decade to cater for the needs of the American driver, a fact that has always been downplayed this side of the pond. The ‘Jagwar’ has always been held in high regard by the American enthusiast-driver that considered the homegrown muscle cars as too blue-collar and the precocious exotica of Italy as too expensive. The Series 3 had now evolved into a sports coupé that offered a smooth automatic gearbox and rear seats. The iconic lines of the early car is still unashamedly British but capable of outperforming bloated V8 rivals with its smooth V12. According to the Heritage Certificate, this Coupé, with automatic gearbox and air conditioning, was dispatched to British Leyland, New York on 10th April 1972 in Primrose Yellow with a Cinnamon interior. Our vendor informs us it was owned by one family from new in Louisiana, and it was imported to the UK and registered on the 1st December 2019.

Buying the car on the 1st December 2021 with the intention of reliving his E-Type owning youth as a racing engineer with the Le Mans winning Group 44 Race Team, our vendor’s ill-health sees the car regretfully offered to auction. The odometer reading of 23,393 miles, at the time of cataloguing is assumed to be genuine, although not warranted, whilst our vendor asserts that the family ownership prior to the 2019 registration in the UK is certainly persuasive. The colour was changed during restoration whilst the delightfully original Cinnamon leather shows lovely patina. Recently a new braking system was fitted to the front and new pads fitted to the rear. Our vendor, having worked on Jaguar V12 racing engines changed the oil himself, and the car will have a fresh MOT for the sale. The history file contains receipts, Heritage Certificate, importation documentation, handbook and V5C.

Residing overseas, the customer would like the car fully assessed and for a full service to be carried out. There also seems to be some issues with the cooling system and air conditioning which we would also like to look at.

Keep up to date with our progress as we get the car prepared and ready for it’s trip back home to Europe.

Update – Working on the 1968 Jaguar E-Type 4.2

The 1968 Jaguar E-Type 4.2 has been in the Bridge Classic Cars workshop for our restoration technicians to tackle a couple of jobs on.

The first task the team had was to repair part of the radiator. The joint at the top of the filler neck had broken, it had previously been glued, and was bypassing the expansion tank. So, our technician Dave cut off the original to clean up the part and resolder the piece back on.

The next step was for Dave to work on the rear brakes and handbrake of the classic E-Type. The team have gone through and manually adjusted the handbrake on the car as well as fitting a new return spring to the near side rear and having to carry out a small modification to the system in order to fit the new spring.

Whilst looking into the brakes, the team noted the light on the dash, which indicates the brake fluid being low or the handbrake was on, wasn’t working. Upon inspection, the team found the bulb was actually gone from the system but upon testing they found the circuit itself was inoperative and suspect the issue is with the internal switch located underneath the interior of the car which would need to be removed to replace.

Also, the team discovered some paint blistering under the brake fluid reservoir but after inspecting the tank actually found the system to be overfilled and the escaped excess had dripped down and disturbed the paint.

Moving onto the engine of the E-Type, the team found a leak from the back of the Cam Cover on the straight-six. Upon inspection, Dave found an O-Ring from the rev counter mechanism had begun to leak so the team removed it from the back of the camshafts and replaced the seals before fitting it back up to the engine.

Repaired – Fixing the Seat Base on the 1951 Jaguar XK120 Roadster

The trim shop at the Bridge Classic Cars Suffolk HQ have been working on repairing the seat base of the 1951 Jaguar XK120 Roadster while at our restoration workshop.

The team have removed the seat base from the car in order to repair the stitching which has come apart. For this, our trimmer Lydia carefully unpicked the sides to remove the cover to restitch it properly and make sure the repair is near enough invisible to keep the originality of the stunning 1950s roadster.

Tightened Up – Replacing and Retightening Trim on the 1951 Jaguar XK120 Roadster

The 1951 Jaguar XK120 Roadster has been in the Bridge Classic Cars workshop to have some smaller jobs finished off.

The team have gone through each of the trim pieces to tighten down the necessary hardware, with any marred or damaged pieces replaced. The team also took the opportunity to recheck the hardware used for fixing down the seats in the gorgeous 1950s roadster.

Nostalgia – Our 1966 Jaguar Mk2 in South Africa

The former owner of our 1966 Jaguar Mk2 3.8 has sent over some photos of its previous life in South Africa!

The photos show everything from the car taken back to a bare painted shell to being used as a wedding car and at the top of some of the amazing scenery that surrounded its hometown.

It’s always amazing to see the former lives of our cars!