Yesterday we had an unexpected new arrival in the form of a blue 1961 Alvis TD21. Unfortunately, this classic had broken down and was on its way to a show which the owners are hosting. They’d traveled down from Wales and had attended a wedding on their trip in the area. On their way across to Oxford, the Alvis stopped working.
This gorgeous classic ended up being brought to us for our technicians to look at. It was found that the starter motor wasn’t working, so it was swiftly sent off last night to be repaired. We’re now just waiting for its return. Well done so far to the technicians for being so quick with diagnosing the issue. Let’s hope we can get it to Oxford in time!
September 3, 2021 8:40 amPublished by Craig Ranson
Ady has now finished rebuilding the engine on the 1973 MG B GT V8 and so it’s now ready to be fitted into the car. As well as painting the engine beforehand, Chris also painted the rocker covers for Ady. You can read about the painting of the engine that Chris did in the paintshop here.
September 2, 2021 3:05 pmPublished by Craig Ranson
Ady has found a problem with the Jaguar clutch release bearings that are able to be bought these days. There’s a design fault with them that means they’re not working correctly on the engine rebuilds. So somehow he’s got to figure out a way of getting around this problem, or trying to find a different design.
Unfortunately, this can be a common problem when parts are re-manufactured for classic cars. They’re often not built to last as well as they originally were or they simply don’t fit right.
September 2, 2021 2:26 pmPublished by Craig Ranson
John has been investigating the wiring on the 1968 Jaguar E-Type Series 1.5 4.2. It’s clear to see that it has been tinkered about with before and unfortunately, the wiring is questionable.
Because of this incorrect work on it, John has put in a new alternator and a new regulator because the alternator wasn’t charging before. He also found that the ignition switch is incorrectly wired, which meant that the amp meter burnt out as a consequence. He’s tested the ignition switch and found that there was a pair of twelve volts wired together that were causing damage to the amp meter.
September 2, 2021 1:49 pmPublished by Craig Ranson
Scott has been continuing his work on the 1973 Jaguar E-Type Series 3. This time around he’s been fitting up the front frame onto the body shell, rebuilding the front suspension and brakes and fitting them, with all new bushings and ball joints, fitting the front hubs with new wheel bearings, fitting the steering rack, fitting front shocks, fitting easy-bleed (to make bleeding the rear brakes easier), fitted left and right front to rear wiring loom/harnesses, fitted the front torsion bars, fitted the fuel lines under the car, new rear axle mounting/hub stops and fitted the rear axle.
September 2, 2021 1:14 pmPublished by Craig Ranson
The work on the 1982 Porsche 911SC is now complete.
The Porsche has been in the trim shop after coming into us at the end of last week, getting its original upholstery freshened up and put back in. When it came to us, the carpets weren’t in, the door cards weren’t attached correctly, the pockets for the doors weren’t attached at all, there were a few bits of carpet panel that were loose and the stitching on the steering wheel had come undone. Kath has been busy resurrecting all of these issues over the last couple of days. As you can see, as well as creating interiors from scratch, the trim shop team are also perfectly capable of putting original ones back into good shape if customers prefer to not have a complete overhaul. If this is something you would be interested in for your classic car, please don’t hesitate to contact us.
September 2, 2021 11:55 amPublished by Craig Ranson
Chris has been busy polishing the paintwork on the doors of the 1998 Honda Integra Type R, while it’s sitting in the workshop having other work done to it.
September 2, 2021 11:09 amPublished by Craig Ranson
After huge amounts of work from Matt sanding, filling and more sanding, and then transferring it into the paint booth for priming, the 1983 Ford Capri 1.6 LS has now been painted! After turning up to us with the exterior looking a little worse for wear, it’s now back to looking fantastic. The final step will be to polish the new paintwork. Great work from Matt, I’m sure you will agree.
September 2, 2021 10:46 amPublished by Craig Ranson
Some exciting news on the 1955 Aston Martin DB 2/4 project. After discovering the original paint colour on the back of the glovebox while it was being stripped apart back in May, the guys in the paint shop have now managed to match it up very closely. You can see in the photos the new paint sprayed onto metal next to the original paint on the back of the glovebox. We’re looking forward to seeing the car painted now! Keep your eyes peeled for progress on that…
September 2, 2021 10:28 amPublished by Craig Ranson
Last night was the launch of our competition to win a magenta 1974 Triumph GT6. As I write this post, over half of the tickets have already sold, that’s over 3,000, leaving only under 2,000 left. So, if you want to be in with a chance of winning this stunning classic car, be sure to head over to our competitions website to get your tickets before they all go. And at £5 per ticket, that’s an absolute bargain!
If you click on the link above, you’ll also be able to find out more information about the GT6, along with more photos and a video.
September 2, 2021 9:59 amPublished by Craig Ranson
Brian has been re-covering more panels for the 1963 Bentley S3 Continental. This time it’s been dash panels, the instrument cover, door cappings and various other panels. The process for all of them involved taking the original black leather off, followed by any foam that was on the panels, and then sanding off the old glue left behind on the wood and metal forms. Brian used the original leather pieces as patterns to mark out around on the new black leather. He replaced the original foam with new 3mm foam. The foam was glued on first and then the leather wrapped over it. Some of the panels, as you can see, just have leather covering them.
September 1, 2021 12:59 pmPublished by Craig Ranson
Lydia has been getting the bonnet of the 1955 Aston Martin DB 2/4 a step closer to the paint shop. The front inside edge had a lot of red oxide left on it so Lydia went about removing as much as she possibly could with thinners and a red scotch pad. There are some parts that aren’t budging so James will look at grinding those out.
September 1, 2021 11:38 amPublished by Craig Ranson
After having a new clear PVC window sewn into the original hood of the 1989 TVR SII 2.9 V6, the rest of the roof needed a bit of attention. The two panels that create the roof in front of the hood has black vinyl covering the underneath. This had various cracks running throughout due to age and wear and it was coming unstuck at the edges. The first decision made was to try and re-glue the edges down, clean off the dirt below the edges of the vinyl, try and glue the cracks together and paint any non-black edges, to take a sympathetic approach so it fitted in with the wear and tear of the rest of the car. However, after Lydia started to try this approach, she wasn’t happy with the results so decided to take the old worn-out vinyl off and start again. Before the vinyl was taken off, the rubbers were peeled off very carefully and with a blade where it was tricky to do by hand. Any remaining glue that was left on the fibreglass was sanded off and cracks in the fibreglass were filled. 3mm foam was cut out and glued on first, making sure to press into the edges and corners to get the shaping right. New black vinyl was then cut out, using the original pieces as patterns. The vinyl was glued over the 3mm foam and pressed into the edges and corners again. You can see in the photos below where the original vinyl was coming away from these edges, which is why it was so important to make those edges as sharp as possible. Lydia went around the sides of the panels to make sure the exposed edges of vinyl looked neat, trimming along the way with a blade. The last step was to re-glue the rubbers on.
September 1, 2021 11:21 amPublished by Craig Ranson
Last Sunday, the 29th of August, East Coast Mini Club came to visit us. The club was doing its annual charity run, raising money for the charity, Mind Suffolk. They managed to raise a grand total of £1,200 for the mental health charity. What an awesome achievement, well done everyone! The run started at 9:30 am at the Ram Meadow car park and was open to both members and non-members, and finished at Bridge Classic Cars. Take a look at our photos from the day. Did you come along on the day? If so, you may spot yourself or your Mini in one or two of the photos.
Well done to Chairman Tom and the entire team behind the event. It was a pleasure to have the club at our workshop.
If you run a car club and are looking for a location to hold an event or have a similar charity run coming up, please don’t hesitate to get in contact with us!
September 1, 2021 10:26 amPublished by Craig Ranson
After coming back from the sandblasters, the chassis of the 1951 yellow Riley RMB is looking a little corroded so James is going to have to repair these sections. Lydia has begun the process by making cardboard templates of these parts, cutting where necessary to get the shaping right. These templates will be used by James to mark out around on the new metal. The original corroded metal will be removed and the new will be welded into place.
September 1, 2021 10:19 amPublished by Craig Ranson
This green 2003 Vauxhall VX220 has just arrived with us. It was actually bought from us back in 2019, so it’s back on familiar ground. It’s only in for a small number of reasons: there’s a squeaking noise when it goes over bumps, which could be down to suspension issues, the customer wants it serviced and put through an MOT and it’s going to get a pre-delivery inspection.
September 1, 2021 8:52 amPublished by Craig Ranson
You might have seen from yesterday’s blog posts that we have bought a “run-around” car, a green 1998 Volvo V40. Well after getting a much-needed clean, our “run-around” car is going to have a service in our workshop to check over everything.
September 1, 2021 8:26 amPublished by Craig Ranson
You may have seen the blog post from last week about the fuel line problems that Dave discovered on the 1971 Jaguar XJ6. If not, here’s a link straight to it. Here are some more photos and another video to show just how bad the problem turned out to be.
James has been continuing his work on the yellow 1951 Riley. The air vent for the second panel was sandblasted last week, so could be welded into its new surrounding. James then used the finished one to determine how much metal to trim off the end. Back in July, he had to do some welding repair work on the left-hand wing. He’s now repaired the other wing. The subframe came back from the sandblasters and showed how much corrosion there was. James has started to make cardboard templates for the parts that need replacing, to mark out new pieces of metal for fabrication.
This 1982 Porsche 911 has recently arrived. The list of jobs that need addressing is the following: the door-bins need fitting, the leather restraint straps on the rear seat need fixing, the upholstery needs reviving with some form of treatment, the passenger window needs fixing because it’s stuck, the steering wheel needs re-stitching, the under-dash panels need to be stuck back down and/or repaired, a battery cut-off switch needs to be put in and the battery is flat so needs to be put on charge.
We’re going to share the blueprint for our extension that’s going on the side of the workshop building. The workmen have arrived today to officially begin the work! As usual, there’ll be photos popping up along the way, so keep watching for updates.
We thought it might also be a nice idea to look back at when our existing buildings started off as a blank canvas and were transformed into what you see today!
Kath has now finished repairing the hood on the 1989 TVR SII 2.9 V6. In the last blog post, we heard about how she was removing the old PVC window out of the hood, because of it becoming delaminated and coming out of the seam at the corners. She used the original as a pattern to mark out around and cut out on a sheet of new clear PVC. Once cut out, Kath applied contact adhesive to the outside edge of the PVC and slotted it in between the layers of hood fabric at the seam edge and left it to dry. She could then sew down the same lines where the previous stitching was to fully secure the window into place. New leather strips were sewn onto the corners. The hood could then be glued to its frame. The vertical bars on the hood frame that is attached to the car had flaking black paint on them. So these were sanded down and then re-painted. The pieces that hold the hood in place at the front and where the front roof panels slot into it, had flaking paint on them too, so these got re-painted in the same manner. The hood could then be attached to the car again. Kath also reglued various pieces of fabric that were coming away around the inside of the TVR.
A small update on the 1955 Aston Martin DB 2/4. The panel that is inside the boot, where the lock is, was corroded and had paint left on it. Lydia took it into the sandblasting in order to remove all of this.
Here’s an update on the 1951 Riley RMB for you. It was found that there was hidden corrosion in between the layers of metal on one of the air vents. In order to get to this, James drilled through the spot welds and eased the metal apart. Lydia then went about sandblasting the main piece of the air vent to remove the corrosion and paint. She also removed existing layers of paint off the side and back of the body shell of the Riley.
As well as the exterior of the 1983 Ford Capri 1.6 LS being transformed in the body and paint shop, Lydia’s been getting pieces from the engine bay in a better state for re-painting. This piece was sandblasted to get the original paint and corrosion off in preparation.
Tamas and Lydia have been tidying up the 1973 MG B GT V8 in various ways. It’s not in for a full restoration so a sympathetic touch was required. There was fraying carpet in places and where it had come unstuck and screws had come out that were holding panels in place. Another thing was there were various painted pieces from the engine bay that had become corroded underneath the paint, so these were either sandblasted or ground down to remove the paint and corrosion, before re-painting.
The much-awaited arrival of the magenta 1974 Triumph GT6 is here! It left Scotland yesterday for its long journey to us here in Suffolk. Thankfully, it’s turned up looking and sounding great! We’re going to get it detailed by our trusty Viper Auto Valet man, Colin, just to give it a little spruce up.
It’s priming day for the 1983 Ford Capri 1.6 LS! But let’s go back to the end of last week for this blog post, when Matt was marking out with masking tape where he could spot dents were on the exterior of the car. He then masked up the front windows and sun-roof to avoid any damage, and began the process of sanding, filling and sanding again all over the car, using both a DA and block sander for the large areas and then using red scotch to go over the shiny bits lefts behind. The work has continued this week. It’s going to be a sympathetic paint job because we’re not taking the windscreen out, so can’t go all-out on it. Thankfully, Matt has found very little corrosion in the process.
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
