Pricey and Lydia have been working on our Honda Integra. Lydia has been sanding down various panels in preparation for paint whilst James has been taking apart the internal panels around the arch and fabricating new parts.
We’ve just received the chassis to our yellow 1951 Riley back from the sandblasters. With all the rust off, we can now start to build it back up.
We’d sent the carburettors off and found that the they needed new shims so Ady has worked on making up newer thicker shims.
Kath and Brian have been working on recovering the ceiling lining in Craig’s Aston Martin DB9. Brian begun by undoing the side panels above the window and unclipping the headliner panel. He then removed the cover and foam so that he was able to glue the cover back down to the panel, making sure he […]
James has been working to dismantle our yellow 1951 Riley and fabricate a new vent panel.
Lydia has been working on recovering a pair of Bentley Continental seats. She has done the whole process from start to finish by hand. She’s replaced the foam, cut new leather from templates she’s made from the old cover, fitted, stitched and glued the new seats together with a keen attention to detail.
After a hit and run collision that left this little moggy with a severely dented rear wheel arch, we’ve begun our repair worked to get this Morris Minor back on the road. The damage was rather substantial and has needed James to fabricate in a new rear arch and panel which will later be painted.
This beautifully kept 2003 Subaru Impreza WRX STi in for what started out as a small rust repair. Leaving no stone unturned James has noticed corrosion into the arch and sill and has taken a ‘belt and braces’ approach to make sure this modern classic is fighting fir for many years to come. James has […]
Brian has been taking apart the the covers from the rear base and squab seat on our Aston Martin DB2/4. He’s un-done the hinge from the bottom edge and top section of the squab and removed the rubber strips from their metal channels. Once he’d undone the metal trims, Brian then removes the tacks holding […]
Our classic Jaguar 240 has two substantial holes in its underside due to corrosion. It’s been sat 18 months and now needs some thorough TLC.
Our Jaguar XJS has had its radiator bored out again to make it run more smoothly.
We’ve manufactured a new stainless steel exhaust as the original was rusty.
We’re currently re-covering the sun visors and ceiling lining. Kath is working at recovering these, creating the patterns and fabric, gluing it down and making new boards.
Our MGB has transition to the luxurious Evans water for its engine which is waterless coolant to accompany the new water pipe. We first need to drain and flush the system with engine flush and then top it up with Evans coolant. We’re also waiting on a new battery isolator switch to arrive so we […]
Our 1960 Peony Red Jensen has had a new boot lid carpet. Brian has cut and glued a leather strip around the inside edge of the boot lid and then glued down the carpet to the inside, cutting holes in the boot to support the arm and catch. We’ve also sent the entire car off […]
Scott has been working on our 1968 Jaguar E-Type 4.2 by removing the rear axel and stripping it down ready to rebuild it. He’s also carried out a lot of welding to make the car safe for its MOT. We expect that in the future this car will need new floor pans and sills as […]
The Surf Blue Mini that we worked on with Ted from Team C Racing for Electric Classic Cars has been up and running at the London Classic Car Show. We’re delighted to see it up and running after its long restoration story.
Just look at the difference after the Honda Integra Recaro seats have been cleaned! They came in looking a little worse for wear but now, after a thorough wash, they’re looking good as new again!
Brian has made up some covers for the rear box pillars on our 1915 Ford Model T. He’s done this in the same style as the seats, making it out of leather and buttons to create this luxurious effect. He began by making up buttons for the rear box covers, marking out the button holes […]
Work is soon underway on the extension to our workshop which means our storage unit has been moved to the other side of the site in preparation for the grounds work to take place. We’re eagerly awaiting this building work to start so that we can have a new exciting workshop with even more space.
We’re delighted to announce that two of our classics have been finished and will be sent off to their owner in Germany very soon. The Tundra MG B was finished a while ago and has been sitting in storage whilst we completed the TR6 but now is the first chance we’ve had to have them […]
Scott has been fitting new rear drum brakes onto the Lada. We’ve been waiting for the new drums to arrive from Russia and now that they are here, we are able to fit them.
We’ve taken apart the exhaust port and fitted new valves onto the cylinder head of our 1954 Jaguar MKVII.
Our 1973 two-door Rolls Royce Corniche is up for sale at Silverstone Auctions where we hope it’ll find its new owner. The live auction is scheduled to be on the 31st July. Take a look at the full shoot:
Pricey has begun to strip down our 1998 Honda Integra so that we can address the request for a re-spray. Pricey has also begun correcting a rusty rear arch and made a note that a sill also needs addressing. We’ve also noted some accident damage on the front right hand corner that we will address […]
Ady has been working on our 1954 Jaguar MKVII and has recently turned to address the air flow. He has opened up the throat on the inlet side to gain 2mm for more air flow and done the same on the exhaust.
Our 1973 White E-Type Roadster is in the paint booth and being prepared for paint. Matt has been getting it read for epoxy primer by removing excess sealer and cleaning the welds. This E-Type, which used to be white, will soon be a new shade…
We’ve added a small paint touch up on our 1962 TVR Grantura as the door had been rubbing on the sill. Chris, our paint shop manager, has address the issue.
We’ve been stripping the door of our 1974 Bristol so that we can access the rubber to replace it. This includes Mauro taking apart both door cards to fit fresh seals.
Pricey has been burning off leftover under-sealer and old paint before it goes to sandblasting. He then scrapes it off so that as little is left as possible.