The trim shop at Bridge Classic Cars have been carefully removing the veneered pieces from the interior of the 1987 Daimler Double Six. Brian, one
The trim team at Bridge Classic Cars have completed the 2nd squab seat for the 1954 Bristol 405 which is in for restoration with us
The interior trim team at Bridge Classic Cars have finished the brand-new bulkhead cover on the 1970 Bristol 411. The team have handmade this piece
The in-house trim shop at the Bridge Classic Cars restoration workshop has been working on finishing up the rear squab seat on the 1955 Jensen
The 1968 MGC Roadster is now in the hands of the Bridge Classic Cars trim team who have been working on refinishing the wooden panelling
With all of the preparations made by the Bridge Classic Cars in-house trim shop, the dashboard and transmission tunnel for the 1979 Arrow Ferrari Daytona
The Bridge Classic Cars trim shop have been working to finish off the handmade cubby boxes for the 1955 Jensen 541. Brian has been making
The trim shop at Bridge Classic Cars have been carefully removing the veneered pieces from the interior of the 1987 Daimler Double Six.
Brian, one of our trimmers, has been removing the centre console pieces along with the dashboard to prepare them for being reveneered. For this, he had to remove all fittings and trim pieces from each panel in order to safely remove them from the car.
Once out, he could get then tear them down further in order to expose the edges of the veneer to be carefully removed and prepared.
The trim team at Bridge Classic Cars have completed the 2nd squab seat for the 1954 Bristol 405 which is in for restoration with us at our Suffolk HQ.
The team have made an exact copy of the other squab seat which was completed earlier. Both of these pieces have been carefully wrapped up and stored ready for the cars reassmebly.
Keep a look out on the Bridge Classic Cars news page for more on the 1954 Bristol 405 very soon.
The interior trim team at Bridge Classic Cars have finished the brand-new bulkhead cover on the 1970 Bristol 411.
The team have handmade this piece to work alongside the work the restoration technicians have done as part of the car’s custom left-hand drive conversion. The edged bulkhead cover had to have its fasteners accurately placed onto the piece and then lined up with the pre-installed locks that hold the cover down.
The in-house trim shop at the Bridge Classic Cars restoration workshop has been working on finishing up the rear squab seat on the 1955 Jensen 541.
Lydia and the trim team have made the new red leather covering for the squab seat from scratch specifically to fit the new foam and base intended for the interior of the classic Jensen 541.
Using what was left of the original material, Lydia created templates that she could then refine further to get the best fit and finish for the piece. After each piece had been sewn together, Lydia finished the edging for the seat in matching bright red for the final touch.
Once wrapped around the foam and base, Lydia could systematically staple the covering down to the piece carefully stretching and pulling it for the final shaping.
The 1968 MGC Roadster is now in the hands of the Bridge Classic Cars trim team who have been working on refinishing the wooden panelling on the interior of the MGC.
Brian carefully removed the veneer on the dashboard and centre console piece by piece to strip the panels back to their most basic. He also removed the radio blanking plate as well as several gauges in order to get access and check over.
With all of the preparations made by the Bridge Classic Cars in-house trim shop, the dashboard and transmission tunnel for the 1979 Arrow Ferrari Daytona has been retrimmed in all-new Alcantara.
Lydia has worked on creating a beautifully fitting and clean template for the new Alcantara covering for the pieces of the classic Ferrari replica. Now, it was time to begin the process of securing the material to the reshaped fibreglass panels.
Using specialist adhesives, the material was carefully stretched and glued down before being pinned in place to let the adhesives cure and strengthen.
Once the material was in place, Lydia could then begin trimming out the openings for things such as the dash vents, switchgear etc. and then proceeded to methodically glue down the tags and get the best finished possible for when the trim pieces were fitted back on to the car.
The Bridge Classic Cars trim shop have been working to finish off the handmade cubby boxes for the 1955 Jensen 541.
Brian has been making the lids for the new cubby boxes. This involves hand finishing the recesses in the lids for the brand new hinges to get the lids to sit perfectly flat onto the bases. He also created the recess in the top to fit the ashtray, this has all been done and finished by hand to give the best possible result for the car.
Along with these pieces, Brian has created the metal base for the cubby boxes. This was then wrapped in black vinyl to match the colour of the interior of the box and give one single uniform look to the boxes.
Bridge Classic Cars are award winning Classic Car Restoration and Maintenance specialists. Your pride and joy is in safe hands with our expert Classic Car Technicians. Take a look at our awards here.
