As the work is being carried out on the other side of the 1986 Daimler DS420, our fabrication team have been working on the passenger
Some of the pieces of the 1978 MG B GT have been refurbished by the team before being handed over to our paint team at
The 1958 Jensen 541R has been having its final stages of sanding finished before it is taken into the Bridge Classic Cars paint booth for
The workshop team have been getting the new inner and outer sills fitted to the 1978 MG B GT which is in for restoration with
The stunning 2013 Porsche Boxster has arrived at the Bridge Classic Cars for our paint and body teams to work their magic on the modern
The workshop team at Bridge Classic Cars have been making good progress on the body shell of the 1978 MG B GT in with us
The fabrication team at Bridge Classic Cars have finished up the crucial repairs to the inner arch and door sill of the 1969 Morris Minor
The restoration technicians from the Bridge Classic Cars workshop have been working on inspecting inside and then strengthening the sills of the 1970 Bristol 411.
The fabrication team at Bridge Classic Cars have been busy repairing the inner wing structure of the 1969 Morris Minor Convertible. Our fabricator Monty has
The bodywork on the 1978 MGB GT which is in for restoration with Bridge Classic Cars continues while the rest of the car is being
As the work is being carried out on the other side of the 1986 Daimler DS420, our fabrication team have been working on the passenger side of the car at the same time.
One of our amazing fabricators, Chris, has been working on removing any corrosion from the classic limousine. Much like the other side of the car, the team have been focusing on the rear arches, inner arches, sills and front arches. Every time an area is in need of repair, Chris would create handmade patch panels specifically for the area they were needed in recreating much of the sills and inner arches by hand.
Some of the pieces of the 1978 MG B GT have been refurbished by the team before being handed over to our paint team at the Bridge Classic Cars Suffolk HQ.
The paint team have refinished the parts in hard-wearing and durable black as part of the restoration.
The 1958 Jensen 541R has been having its final stages of sanding finished before it is taken into the Bridge Classic Cars paint booth for its last stage of primer.
The classic Jensen has been worked on by the body team to perfect each curve and shape across the entire car as a whole. Then, some of the panels were taken into the booth to have their final coat of primer before the bodyshell is taken in soon.
The workshop team have been getting the new inner and outer sills fitted to the 1978 MG B GT which is in for restoration with Bridge Classic Cars.
The sills are being replaced by the team due to areas of corrosion and damage to the shell which had found their way into the sills of the classic sports car. The inner and outers were carefully cut out of the car before the high quality replacements were offered up and the area trimmed to accept them before being welded in.
The stunning 2013 Porsche Boxster has arrived at the Bridge Classic Cars for our paint and body teams to work their magic on the modern sports car.
The Boxster has got some very minor stone chipping and a few blemishes in its otherwise flawless paintwork which the team will be addressing.
Keep an eye out on the Bridge Classic Cars news page for more updates on the 2013 Porsche Boxster.
The workshop team at Bridge Classic Cars have been making good progress on the body shell of the 1978 MG B GT in with us for restoration at our Suffolk HQ.
Our restoration technician Rob has been working on cutting out any form of corroded metal from the car to make sure everything is structurally right and lining up properly. Firstly, he worked on getting the rear valance of the classic MG B sorted.
The old valance was heavily corroded and warped so our team sourced a replacement panel and began the process of carefully removing the old piece in such a way as to not damage any of the mounting surfaces behind it. All of the surfaces behind the valance were cleaned and prepared ahead of the new piece firmly welded into place.
Next, Rob finished the work needed to the bottoms of the A-pillars. This needed to be done before the team could begin fitting and placing the new sills. With the old sills cut out of the car and the new ones trimmed and clamped they could be welded into place taking into account the new A-Pillar and the mounted door to ensure there was no overlap or conflict between any of the pieces.
Finally, Rob could cut out the rear arch. This was heavily corroded and in need of replacement. So carefully the spot welds were cut out and the original piece taken out before offering up the replacement arch.
The fabrication team at Bridge Classic Cars have finished up the crucial repairs to the inner arch and door sill of the 1969 Morris Minor Convertible.
These two pieces which make up the driver’s A-Pillar is used for not only the structure and mounting of the wings but also dictate the opening in the body for the doors. So, these need to be not only structurally sound and strong but very precise so our body shop technicians can get the panels aligned perfectly when the car is transferred into their department.
The fabrication team have carefully and precisely put the pieces back onto the classic Morris Minor in a particular order to build on the rigidity and strength needed in this particular area.
Now, it’s time to move onto the passenger side.
The restoration technicians from the Bridge Classic Cars workshop have been working on inspecting inside and then strengthening the sills of the 1970 Bristol 411.
The team cut off the chassis cover in order to inspect the structural pieces of the frame on the classic Bristol, inside was found to be in generally good condition but they did notice the strengthening rail, which pinches the two seams together, had corroded quite heavily. So, the team have fabricated a new replacement piece to put back the strength and rigidity to the piece.
The fabrication team at Bridge Classic Cars have been busy repairing the inner wing structure of the 1969 Morris Minor Convertible.
Our fabricator Monty has been sympathetically repairing the classic Morris and paying close attention to structural areas of the car but also play a key role in the aesthetics. This point of the inner wing also ties into the core support and the mounts for the front wings which will allow the panels to be refit by our body shop team with perfect alignment. Previously, the panel which was in place allowed for a significant amount of flex and movement which unless rectified can cause issues for the body team when it comes to fitting the car back together.
The bodywork on the 1978 MGB GT which is in for restoration with Bridge Classic Cars continues while the rest of the car is being worked on by the various other restoration departments.
The bodywork on the car has been worked on piece by piece, with any remnants of corrosion or rust completely removed from the shell of the classic sports car.
Using replacement patch panels, the areas were carefully cut out and the metal replaced piece by piece.
Bridge Classic Cars are award winning Classic Car Restoration and Maintenance specialists. Your pride and joy is in safe hands with our expert Classic Car Technicians. Take a look at our awards here.
