Our 1953 Aston Martin DB2/4 has arrived back at our Suffolk HQ following its appointment with the media blasters.
The body was carefully removed from the chassis of the 1950’s GT previously by our workshop technicians and carefully transported to a local blasting company to carefully remove the Claret paint as well as exposing any areas which will need attention by the team here at the Bridge Classic Cars restoration workshops.
The body arrived back at our workshops earlier this week and was taken straight into our in-house fabrication shop for our expert team of fabricators to work on getting this rare and unique GT car back into better than new shape.
The team have begun to get the body onto the framing jig to get it ready for the delicate and highly-skilled work of repairing the areas affected by 71 years of being used and stored.
To begin with, Lydia has made a mock-up panel to test the measurements for the tuck and roll flutes. This requires precise measurement and calculation to ensure that the flutes end up at the correct width. If they do not, then the panel will not fit! Tuck and roll requires the correct measurements on both a cotton underlayer and the leather upper layer. Each flute is then filled with foam after it has been sewn up, thus encapsulating the foam into the channel. Lydia has not tried this method of tuck and roll before, but found it to be quite effective, and it ensures that the seat retains its original look. Next was the shaping of the panel to make it fit the seat. She used a combination of the original pieces and her judgement to determine the size and shaping of the panel, then cut it down to size. As we are working with the original foam, which is in fairly good condition, it didn’t require much deviation from the original pattern piece. Lydia then worked her way through laminating all of the other pieces onto scrim foam, adding her point marks, and sewing them on. After many attempts at trying the covers on and altering them, Lydia is happy with the fit, so she begun to staple them and glue the flies to the foam.
November 10, 2023 3:34 pmPublished by Craig Ranson
We use cookies
We use cookies to deliver the best possible experience whilst visiting our website. By clicking "Accept All", you consent to our use of cookies, or you can manage your preferences by clicking the link below. You can manage your preferences at any time from out Cookie Policy page.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
