C-Types Lights And Indicators
April 11, 2024
Jonn has been working on our 2022 Bridge C-Type Replica. He raised it up on the ramp and removed the centre under trays. He then
C Type Replica
C-Type Bonnet
March 26, 2024
John has been fitting the temperature sender to our 2022 Bridge C-Type Replica. He also routed the wiring and secured it under the manifold. He
C-Type Door Card
March 4, 2024
Lydia has recently been making a pretend ‘door card ‘ to balance out the interior of our 2022 Bridge C-Type Replica. There is only one
C-Types Lights And Indicators
April 11, 2024
Jonn has been working on our 2022 Bridge C-Type Replica. He raised it up on the ramp and removed the centre under trays. He then worked out where and how to fit the prop shaft speed sensor pick up and sensor.
After measuring the length of wire required to connect the indicators, a small twin-core loom was made and taped up. After feeding the wire through the hole under the indicator, it was connected, tested, and repeated on the other side.
The rear headlight covers were also fitted before the bonnet alignment was finished.
C-Type Bonnet
March 26, 2024
John has been fitting the temperature sender to our 2022 Bridge C-Type Replica. He also routed the wiring and secured it under the manifold.
He then started to fit up the bonnet before fitting the headlight mounts and headlights to both sides.
The grille was fitted to the air intake which was then installed.
John then polished the front panels and radiator top as these are visible through the grille.
C-Type Door Card
March 4, 2024
Lydia has recently been making a pretend ‘door card ‘ to balance out the interior of our 2022 Bridge C-Type Replica. There is only one door, with a very small area that Lydia has made a covering for, so she had to work out something that would look good on the other side too. She first made a template from paper and checked this for size. She then used this to make the card shape and cut it out from leather. Then she marked the diamond pattern to mirror the other side and sewed this. The door card was finished with a piping edge to give it a nice finish.
