Brian has finished creating the new headlining for the 1990 BMW 750 iL. After taking the original fabric off the board and cleaning the board up, a grey nyylon brushed headlining foam was used to re-cover the board, which was similar to the original. Brian gradually glued the new fabric on, pressing into the curves and contours to get a neat finish, and trimmed away where any holes were for attachments and panels. After he had re-covered the board, Brian then set about rejuvenating the sun visor switch panel. Once that was done, the headlining board was put back into place in the car, along with the sun visor switch panel and all the panels and pieces that were taken out of the car to get the board out. Another job finished!
Brian has been getting on with renewing the headlining in the 1990 BMW 750iL. He started off by removing all the panels and parts that went onto the headlining and were holding it in place. Once these were all taken off, the board with the headlining on could come out via the boot of the car. Brian could then start taking the original headlining fabric off the board.
Another new arrival into us is this 1990 BMW 750iL. It’s come in to have a new headlining made and fitted in our trim shop, to get it looking tip-top again.