Interceptor In Paint

Interceptor In Paint

Our 1975 Jensen Interceptor MK3 has been in the Bridge Classic Cars paint shop with Chris. He prepped the inside and underneath of the car ready for dtm and raptor. He then applied epoxy to all of the inside and engine bay. Chris then applied dtm satin black and raptor to the inner wheel arch […]

Sill Step

Christian modified the sill step of our 1975 Jensen Interceptor Mk3. He also cleaned the car out and sprayed it ready for storage.

Safety First – Seat Belt Mounts

Classic car technician Chris has been continuing his work on our 1975 Jensen Interceptor MK3. To make sure the car is safe to drive once it has been fully restored, Chris has welded in the seat belt mounts. In addition to the seat belt mounts, Chris also welded the outer panels onto the driver’s side […]

Interceptor Repairs

Classic car technician Monty has been completing more repair work on our 1975 Jensen Interceptor MK3. This time, his attention has been on the floor, the inner sill, and the doors. Repairing the metalwork of our classic Interceptor has been a long and challenging process but, both Monty and Christian have been doing a great […]

Back To Our Interceptor

Classic car technicians Monty and Chris have restarted their work on our 1975 Jensen Interceptor MK3. As you can see from the images below, things are progressing nicely on this classic car and it is slowly starting to take on the recognisable shape of a Jensen Interceptor. Monty and Chris will continue their work and […]

The Metalwork Continues On Our Jensen Interceptor

Classic car technicians Monty and Christian have continued their work on our 1975 Jensen Interceptor MK3. The metalwork of any car restoration tends to be the part of the project that takes a lot of time. This makes sense when you think that the bodywork is the foundation of the vehicle. The metalwork needs to […]

1975 Jensen Interceptor MK3 Progress

Classic car technicians Monty and Christian have continued their work on our 1975 Jensen Interceptor MK3. They have been busy fabricating a range of different panels and parts for this beautiful classic car. Areas of focus have been the inner quarter panels, the inner wing, the rear heat shields, and the rear rail. As you […]

New Rear Panels

Classic car technicians Monty and Christian have continued their work on our 1975 Jensen Interceptor MK3. After new front panels were fitted their attention turned to the rear of the car. Monty and Christian removed the rear quarter before fitting new panels in its place. Some of the new panel pieces needed to be made […]

New Panels And Looking More Like A Car

Our 1975 Jensen Interceptor MK3 continues to make good progress and is beginning to look much more like a car now than it has in recent times. Classic car technicians Monty and Christian have been hard at work fitting new panels to this impressive classic car. After removing a fairly large portion of the old […]

Parts For Our 1975 Jensen Interceptor MK3

Our 1975 Jensen Interceptor MK3 has had several parts fabricated recently. Classic car technicians Monty and Christian have been hard at work making sure the parts being made fit perfectly where they are needed, and can also do the job they are meant to do once the car is back up and running and on […]

Work Continues On Our 1975 Jensen Interceptor MK3

Classic car technicians Monty and Christian have been spending quite a bit of time with our 1975 Jensen Interceptor MK3 lately. From removing the front wings to working on the new body panels that arrived at the workshop, they have been busy making good progress on this special classic car. As you can see from […]

Wings Removed

Classic car technicians Monty and Christian have taken the front wings off of our 1975 Jensen Interceptor MK3 to make way for the new ones to be fitted at a later date. They made sure everything was done accurately and safely so, when the new wings are ready, they will fit perfectly into place.

New Body Panels

To get our 1975 Jensen Interceptor MK3 back on the road, some new body panels were needed. We now have these and they will soon be fitted to the car as it continues to move through its restoration journey. We found it very exciting to see the new panels sitting on the shell of the […]

Back from Stripping – The 1975 Jensen Interceptor Mk3 Shell Back from ProStripping

The bodyshell of the 1975 Jensen Interceptor Mk3 has arrived back at our restoration workshops after being sent away for ProStripping. After a series of chemical treatments, the bodyshell has been stripped off all loose corrosion and any fillers or sealants for the team to inspect and assess the pure condition of the classic Jensen […]

Teardown – Preparing the 1975 Jensen Interceptor Mk3 for Dipping and Blasting

The 1975 Jensen Interceptor Mk3 is in the Bridge Classic Cars workshops at our Pettistree HQ for body and paintwork. The fabricator and restoration teams have been working together in order to strip apart and teardown the shell of the classic Interceptor. The shell and many of its associated parts from the suspension need to […]

Coming Soon – 1975 Jensen Interceptor Mk3

Bridge Classic Cars will soon be welcoming this 1975 Jensen Interceptor Mk3 for an aesthetic restoration by our in-house teams. Our paint and body teams will assess and report on the condition of the classic GT car which will then put together a plan to get the car sorted out. Expect to see much more […]