1959 Austin Healey Frogeye Sprite

Heading Home – Work on the 1959 Austin Healey Frogeye Sprite is Complete

The 1959 Austin Healey Frogeye Sprite has been in the Bridge Classic Cars workshop for our restoration technicians to get the amazing little sportscar back into perfect running order.

The team have worked on rebuilding and adjusting the brakes and working on the hydraulic system which not only controls the brakes but also works the clutch as well. The slave cylinder had to be replaced due to a leak from a seal which was causing an issue bleeding the system to make sure the whole circuit remained pressurised.

Along with that, the team found several issues with the suspension of the classic Austin Healey. This required some of the important substructures of the car to be carefully rewelded, as well as removing and correctly installing parts of the wishbones.

To take a look a the entire project, click here!

New Piece – New Clutch Slave Cylinder on the 1959 Austin Healey Frogeye Sprite

The new clutch slave cylinder for the 1959 Austin Healey Frogeye Sprite has arrived at Bridge Classic Cars to be installed on the classic sports car.

Once the piece is in place and the hydraulic system completely bled, the workshop can begin to test and check over the rest of the car as part of the jobs requested by its owner.

Inspection – Clutch Slave Cylinder on the 1959 Austin Healey Frogeye Sprite

The 1959 Austin Healey Frogeye Sprite currently in the Bridge Classic Cars workshop at our Suffolk HQ has been having the clutch system inspected and assessed.

After very little use since being replaced, the inside of the slave cylinder has corroded and seized. The brakes and the clutch for the Frogeye Sprite share the same hydraulic system, so when the team at Bridge Classic Cars attempted to bleed the brakes, the seized clutch slave wouldn’t allow the brakes to be fully bled and adjusted.

A new slave cylinder is required in order to complete the overhaul.

Mirror Finish – Machine Polishing the 1959 Austin Healey Frogeye Sprite

At Bridge Classic Cars, we have a phrase called ”Dead in Red”. This is what we’ve found to be the best description of red paint after years of oxidization and exposure to the elements.

So, while we have this stunning 1959 Austin Healey Frogeye Sprite in our workshop we thought it was time to bring back the paint to its beautiful glossy and deep finish. The car has been both machine and hand polished to not only bring back the depth of the red paint but also protect it for years to come and allow its paint more longevity.

As you’ll agree, it looks absolutely wonderful now the paint is bright and vibrant.

Moving Along – Working on the 1959 Austin Healey Frogeye Sprite

The 1959 Austin Healey Frogeye Sprite in the Bridge Classic Cars has been moving forward towards the goal of running and stopping perfectly.

First on the list of jobs was for our technician, Dave, to look into the cooling system on the iconic classic sports car. Dave began by looking at the radiator, which on inspection had a broken mount for which he fabricated a new replacement for. With the radiator out, the workshop could then work on replacing the water pump for the car.

Dave found the old water pump wasn’t in the best of shapes so it’s good that we had been asked to replace it with a customer supplied unit. During this time, he took the opportunity to completely flush out the cooling system and clean up the outlets. With this, it was found the thermostat was packed almost solid. The battery on the car has also been replaced and the battery tray rust treated.

After this had been completed, Dave could begin his inspection of the suspension and brakes as part of the car’s pre-MOT check. He found the driver’s side track control arm was loose and the bolts which held it were so corroded they couldn’t be tightened accurately. So, he removed the old bolts, cleaned the threads in the arm and replaced it with new hardware from our stores. Whilst inspecting the braking system on the Frogeye, Dave discovered that the master cylinder had become corroded internally from sitting which in turn had caused the wheel cylinders (which were recently fitted) to seize. Replacements were going to be needed to get the brakes on the Frogeye working correctly.

With this and waiting for several parts, Dave could now move on to the next jobs on the list…